currently, only support for fully disabling nvidia is provided, which
is helpful for saving power/heat.
In the future, this should be extended so we can choose:
- nvidia only (choose between nouveau/nvidia driver)
- IGP only
- Hybrid (choose between nouveau/nvidia driver, use the "bumblebee" package/daemon)
svn path=/nixos/trunk/; revision=32085
Also, removed the firmware-free option because that firmware is already in the kernel package and thus causing collisions otherwise.
svn path=/nixos/trunk/; revision=31527
Fix sane-backends to generate udev rules, add a snapshot of sane-backends's unstable repo, and add a SANE nixos module
svn path=/nixos/trunk/; revision=30764
There is room for improvement here. The options in conffile could be broken out into individual options and an extraConfig option added. But I think this looks right.
Patch by mornfall, slightly modified by me
svn path=/nixos/trunk/; revision=30731
For example, I use the following settings to configure T-Mobile Internet
access on my laptop, which is connected to the cell phone by USB:
| environment.wvdial.dialerDefaults = ''
| Init1 = AT+CGDCONT=1,"IP","internet.t-mobile"
| Modem Type = USB Modem
| Phone = *99#
| ISDN = 0
| Username = tm
| Password = tm
| Modem = /dev/ttyACM0
| Baud = 460800
| '';
svn path=/nixos/trunk/; revision=30489
to be rerouted to PulseAudio.
Note that this is distinct from the already existing module
‘services/audio/pulseaudio.nix’ that provides a system-wide
PulseAudio daemon, which is usually not what you want.
svn path=/nixos/trunk/; revision=27958
problem is that configuration values below a mkIf are evaluated
strictly even if the condition is false. Thus "${luksRoot}" causes
an evaluation error. As a workaround, use the empty string instead
of `null' as the default value. However, we should really fix the
laziness of mkIf. It's likely that NixOS evaluation would be much
faster if it didn't have to evaluate disabled configuration values.
svn path=/nixos/trunk/; revision=24477
tsocks leaks DNS requests and is less secure than torsocks.
torsocks is a fork of tsocks that is patched specifically for Tor.
svn path=/nixos/trunk/; revision=24012
and enabled desktop manager (e.g. "kde" if KDE is enabled, and
"xterm" if nothing is explicitly enabled). This means that you
don't have to write
services.xserver.desktopManager.default = "kde4";
anymore in addition to
services.xserver.desktopManager.kde4.enable = true;
to make KDE the default desktop environment.
* Remove the "none + none" session type.
* Remove the "+ none" string at the end of session types. I.e. now
it's "kde", not "kde + none".
* In kdm, add coreutils to its SystemPath so that it can remove the
temporary directories in /tmp that it creates.
svn path=/nixos/trunk/; revision=23036
SABnzbd makes Usenet as simple and streamlined as possible by automating everything we can. All you have to do is add an .nzb. SABnzbd takes over from there, where it will be automatically downloaded, verified, repaired, extracted and filed away with zero human interaction.
http://sabnzbd.org/
svn path=/nixos/trunk/; revision=22446
Now both polkit-1 and old policykit are enabled. Packages that can use both will
be migrated to new polkit-1, than old one can be disabled.
svn path=/nixos/trunk/; revision=21776
I made the system sw path include /etc/xdg - awesome looks for some file
in the XDG_CONFIG_DIRS, which in bashrc is set to point to the profiles/etc/xdg
svn path=/nixos/trunk/; revision=21675
the CURL_CA_BUNDLE environment variable. This allows curl to work
without the `-k' flag on https sites with a properly signed
certificate.
svn path=/nixos/trunk/; revision=19572
automatically. This is mostly useful for testing. (KDM also has
this feature, but it's nice not to depend on KDE for non-KDE tests.)
svn path=/nixos/trunk/; revision=19239
of usual system counters).
It sets up some cron jobs for collecting the data, and not that often, generating the
graphs. Then the httpd server is configured with a directory with the generated
static files.
http://www.brianlane.com/software/systemhealth/
svn path=/nixos/trunk/; revision=18866
the acpid service.
* Add a pm-utils hook to allow commands to be executed when the system
suspends/resumes etc.
svn path=/nixos/branches/upstart-0.6/; revision=18353
no longer emits specific events for those. Instead it emits a
"runlevel" event. The "runlevel" task starts the "shutdown" task to
perform the desired action.
* Upstart 0.6 no longer has a "shutdown" event, so "stop on shutdown"
no longer works. Therefore the shutdown task explicitly stops all
running Upstart jobs, before sending a TERM/KILL signal to all
remaining processes.
* Do a "chvt 1" at the start of the shutdown task to switch to the
console.
* Use /dev/console instead of /dev/tty1, since if somebody is logged
in on tty1, bad things will happen.
svn path=/nixos/branches/upstart-0.6/; revision=18224
* Add deprecated options for "serviceType", "serviceName", "function" and
"config" without changing the behavior.
svn path=/nixos/trunk/; revision=18150
fetch definitions of oldest options and to add them inside the new option.
Properties are still valid and will not be affected by the renaming. e.g:
with: rename alias "foo.bar" to "baz.quz"
and with the following module:
{
foo.bar = (mkOverride 10 {}) 42;
baz.quz = 21;
}
the result of baz.quz would be 42 because the priority is still working
after the renaming.
svn path=/nixos/trunk/; revision=17484
grub. Its options are no more inside 'boot', but inside 'boot.loader.grub'.
I added a new bootloader configuration for nixos, generationsDir. It creates
/boot/default/{init,initrd,kernel,system} symlinks, and the same for the generations
in /boot/system-$gen/{init,initrd,kernel,system}.
I can program the u-boot loader to load /boot/default files always, and have
a minimal nixos boot loader installer functionality. Additionally, I can refer
to the other system generations easily, with a simple 'ls' in /boot.
svn path=/nixos/trunk/; revision=17460
* Modularised the xorg.conf generation. For instance, the Wacom and
Synaptics support has been moved into separate modules. The
contents of xorg.conf is defined by the option
services.xserver.config, and various other options for specific
sections (e.g. services.xserver.serverLayoutSection).
* displayManager.job.env: made this an attribute set.
* tcpEnable -> enableTCP for naming consistency.
* defaultDepth can be set to 0 to leave it undefined (needed for the
vmware driver).
* Removed some options that seem obsolete or are now the default
(e.g. RenderAccel, AllowGLXWithComposite).
* Removed services.xserver.package. This can now be done using
nixpkgs.config.packageOverrides.
svn path=/nixos/trunk/; revision=17004
adding an attribute "password" that defines the default password for
an account. The default (null, as opposed to the empty string)
means not to set a password.
svn path=/nixos/trunk/; revision=16937
be set from the NixOS configuration. For instance, you can say
nixpkgs.config.firefox.enableGeckoMediaPlayer = true;
environment.systemPackages = [ pkgs.firefox ];
but the more interesting application is to apply global overrides to
Nixpkgs throughout NixOS, e.g.
nixpkgs.config.packageOverrides = pkgs:
{ glibc = pkgs.glibc27;
gcc = pkgs.gcc42;
};
would build the whole system with Glibc 2.7 and GCC 4.2. (There are
some issues with "useFromStdenv" in all-packages.nix that need to be
fixed for packages in the stdenv bootstrap though.)
The implementation of this option is kind of evil though due to the
need to prevent a circularity between the evaluation of
nixpkgs.config and the "pkgs" module argument.
svn path=/nixos/trunk/; revision=16866
separate module, which just declares a configuration value that
causes the xinetd module to add it to xinetd.conf. Also Nixified
the service declarations to abstract over the inetd implementation.
* Renamed the services.xinetd.tftpd options to services.tftpd. The
fact that the tftpd module uses xinetd is an implementation detail.
* xinetd: use -dontfork to let Upstart monitor it, and use -syslog to
get error messages at startup.
svn path=/nixos/trunk/; revision=16803
* Let ConsoleKit track the current logins instead of pam_console.
Udev now takes care of setting the device permissions to the active
user. This works much better, since pam_console wouldn't apply
permissions to new (hot-plugged) devices. Also, the udev+ConsoleKit
approach supports user switching. (We don't have that for X yet,
but it already works for logins on virtual consoles: if you switch
between different users on differents VCs with Alt+Fn, the device
ownership will be changed automatically.)
svn path=/nixos/trunk/; revision=16743
interface names, use udev's own firmware loader, and dropped the
sndMode option (udev puts all audio devices in the "audio" group, so
users can be added to that group if necessary).
svn path=/nixos/trunk/; revision=16692
initialising network interfaces, etc.) to modules/tasks. This
follows the Upstart terminology: a service is a job that doesn't
usually terminate (e.g. a daemon), while a task is a job that does
some work and then exits.
svn path=/nixos/branches/modular-nixos/; revision=15771
passwords is now done in an activation scriptlet rather than an
Upstart job (not tested). BTW, we should get rid of this module and
add support to the users-groups.nix module for creating accounts
with an empty password.
svn path=/nixos/branches/modular-nixos/; revision=15769
modules/programs/pwdutils.
* Renamed config.system.shell to config.users.defaultUserShell and
updated the description to make clear it has to be a non-store
path.
svn path=/nixos/branches/modular-nixos/; revision=15761
configuration for specific programs. For instance, ssh.nix provides
the configuration for the SSH client; ssmtp.nix provides the
configuration for the `ssmtp' MTA.
svn path=/nixos/branches/modular-nixos/; revision=15757
empty now), do more of bashrc.sh declaratively, and moved nsswitch
generation to modules/config/nsswitch.nix.
svn path=/nixos/branches/modular-nixos/; revision=15754
Non-valid modules are commented inside the generated list.
Move module paths which are not the module directory into the legacy.nix file.
svn path=/nixos/branches/modular-nixos/; revision=15751
