Add another option for debugging instead. Lots of users have been
complaining about this default behaviour.
This patch also cleans up the EFI bootloader entries in the ISO.
This version should have more conventional regexes that work across many
platforms and regex engines. This is an issue because up until Nix 1.11,
Nix called out to the libc regex matcher, which behaved differently on
Darwin and Linux. And in Nix 1.12, we're moving to std::regex which will
also behave differently here.
And yes, I do actually evaluate make-disk-image.nix on Darwin ;)
Currently, if you try to build a NixOS config including channel.nix, e.g.:
nix-build -I nixpkgs=. -I nixos-config=nixos/modules/installer/cd-dvd/installation-cd-minimal.nix nixos -A config.system.build.isoImage
twice in a row, you end up with two different build results. This is
caused by the 'result' symlink of the first build affecting the channel
contents of the second build.
If we use filterSource with a predicate that ignores the 'result'
symlinks, the problem is gone. Do the same thing for VIM/Emacs
swap/backup files to avoid even more 'spurious' rebuilds.
Additionally, filter out the '.git' directory at the same time, as we
'rm -rf' it from the result anyway. This avoids a considerable amount of
unnecessary file I/O copying and deleting the .git directory.
Turns out all variants of start.elf and fixup.dat are needed (depending
on what's in config.txt). I was under the mistaken impression that you
were supposed to rename one of the variants to switch using them, but
nope.
The profile minimal has several drawbacks: no man pages, unusual 'dbus'
lib that makes many X11 pieces to rebuild, etc.
With xz compression in the squashfs, despite these additions, the iso is
smaller than what it was in 16.09.
- RPi3 successfully gets to U-Boot, but then fails to boot the kernel
due to a missing device tree file. This should get added to the 4.8
kernel release once this patch is merged: https://lkml.org/lkml/2016/6/1/841
- RPi2 is not tested, but it should successfully boot the NixOS image.
This command was useful when NixOS was spread across multiple
repositories, but now it's pretty pointless (and obfuscates what
happens, i.e. "git clone git://github.com/NixOS/nixpkgs.git").
Allow usage of list of strings instead of a comma-separated string
for filesystem options. Deprecate the comma-separated string style
with a warning message; convert this to a hard error after 16.09.
15.09 was just released, so this provides a deprecation period during
the 16.03 release.
closes#10518
Signed-off-by: Robin Gloster <mail@glob.in>
Reportedly some ARM boards need some boot code at the start of a SD card
that could be larger than a megabyte. Change it to 8M, and while at it
reduce the /boot size such that the root partition should now start on a
128M boundary (the flash on SD cards really don't like non-aligned
writes these days).
Building config.system.build.isoImage would fail with the following
error using the channel:
ln: failed to create symbolic link
'/nix/store/zz0hzi5imrg4927v6f8mv281qs6v6pbq-nixos-16.03pre69762.e916273/nixos/nixpkgs/.': File exists
The fix skips symlink as it already exists if the channel
nixpkgs copy is used.
Fixes#10367
Setting nixosVersion to something custom is useful for meaningful GRUB
menus and /nix/store paths, but actuallly changing it rebulids the
whole system path (because of `nixos-version` script and manual
pages). Also, changing it is not a particularly good idea because you
can then be differentitated from other NixOS users by a lot of
programs that read /etc/os-release.
This patch introduces an alternative option that does all you want
from nixosVersion, but rebuilds only the very top system level and
/etc while using your label in the names of system /nix/store paths,
GRUB and other boot loaders' menus, getty greetings and so on.
We seem to be in an unfortunate situation: booting without 'nomodeset'
causes hangs when booting on some NVIDIA cards (6948c3ab80), but on the
other hand adding 'nomodeset' prevents X from starting on other hardware
(e.g. issue #10381 and my Thinkpad X250 with an integrated Broadwell GPU).
Attempt to remedy this situation a bit by adding a separate entry in the
ISOLINUX menu (with the non-'nomodeset' being the default).
Since commits 89e9837 and 5b8dae8 the manual no longer depends on
evaluation of any packages from nixpkgs, so all errors of the form
"Package 'foo' is not supported on 'armv7l-linux'" are gone.
mmc_block and sdhci_acpi are both necessary for a Bay Trail Chromebook with an
internal eMMC drive. The sdhci_acpi module is detectable but I can not figure
out a way to check whether the mmc_block module is needed by just looking at
/sys/
The resulting image can be copied to a SD card with `dd` and is directly
bootable by a suitably configured U-Boot. Though depending on the board, some
extra steps are required for copying U-Boot itself to the SD card.
Inside the image is a partition table, with a FAT32 /boot and a normal
writable EXT4 rootfs. It's possible to directly reuse the SD image's
partition layout and "install" NixOS on the same SD card by replacing
the default configuration.nix and nixos-rebuild, and actually is the
preferred way to use these images. To assist in this installation
method, the boot scripts on the image automatically resize the rootfs
partition to fit the SD card on the first boot.
The SD images come in two flavors; one for the ARMv6 Raspberry Pi,
and one multiplatform image for all the boards supported by the
mainline kernel's multi_v7_defconfig config target. At the moment, these
have been tested on:
- Raspberry Pi Model B (512MB model)
- NVIDIA Jetson TK1
- Linksprite pcDuino3 Nano
To build, run:
nix-build '<nixpkgs/nixos>' -A config.system.build.sdImage \
-I nixos-config='<nixpkgs/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix>'
It comes in handy to alter the menu label if you're not building a NixOS
installer image but for example if you want to build a live system and
still want to re-use the iso-image.nix module.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Should fix at least nixos.tests.installer.simple.x86_64-linux
http://hydra.nixos.org/build/23001712:
machine# error: cannot download Encode-Locale-1.03.tar.gz from any mirror
machine# builder for ‘/nix/store/y8gbx2d2fdcvvjy1z53xksfgq66ydlx0-Encode-Locale-1.03.tar.gz.drv’ failed with exit code 1
machine# cannot build derivation ‘/nix/store/y1knci7rix3asnh2b4kfv8jhl2j99xih-perl-Encode-Locale-1.03.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/7xspjwh48kg16drv1jjg5cffaqbxbp8p-perl-libwww-perl-6.05.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/8qsmz3bbk1jwhh50c3i9700bkmn8ns5c-nss-cacert-3.19.1.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/0rgf2l3mdszs4a989ympwc9gk2k8wq6z-nixos-artwork-e71b684.drv’: 1 dependencies couldn't be built
...
Commit 159fed47bc (nixos/grub: Fix video display on efi) changed BIOS
systems to start in non-text mode as well. Enable FB_VESA to get a
framebuffer console on BIOS systems. Change FRAMEBUFFER_CONSOLE to 'y'
instead of the default 'm' to so the user doesn't need to manually load
the fbcon module anymore.
Other distros have similar defaults, at least on Arch:
CONFIG_FB_VESA=y
CONFIG_FRAMEBUFFER_CONSOLE=y
and on Ubuntu (12.04):
CONFIG_FB_VESA=m
CONFIG_FRAMEBUFFER_CONSOLE=y
Fixes#8139
Fixes#6795.
This was co-authored with @bobvanderlinden.
(cherry picked from commit e19ac248ae59fd327c32b1ae3e37792c22a7c7ac)
Signed-off-by: Domen Kožar <domen@dev.si>
Conflicts:
nixos/modules/installer/cd-dvd/iso-image.nix
There are a number of hidden restrictions on the syslinux
configuration file that come into play when UNetbootin
compatiblity is desired. With this commit these are documented.
This changes the bootloader for iso generation from Grub to
syslinux. In addition this adds USB booting support, so that
"dd" can be used to burn the generated ISO to USB thumbdrives
instead of needing applications like UnetBootin.
The old boot.spl.hostid option was not working correctly due to an
upstream bug.
Instead, now we will create the /etc/hostid file so that all applications
(including the ZFS kernel modules, ZFS user-space applications and other
unrelated programs) pick-up the same system-wide host id. Note that glibc
(and by extension, the `hostid` program) also respect the host id configured in
/etc/hostid, if it exists.
The hostid option is now mandatory when using ZFS because otherwise, ZFS will
require you to force-import your ZFS pools if you want to use them, which is
undesirable because it disables some of the checks that ZFS does to make sure it
is safe to import a ZFS pool.
The /etc/hostid file must also exist when booting the initrd, before the SPL
kernel module is loaded, so that ZFS picks up the hostid correctly.
The complexity in creating the /etc/hostid file is due to having to
write the host ID as a 32-bit binary value, taking into account the
endianness of the machine, while using only shell commands and/or simple
utilities (to avoid exploding the size of the initrd).
This changes the bootloader for iso generation from Grub to
syslinux. In addition this adds USB booting support, so that
"dd" can be used to burn the generated ISO to USB thumbdrives
instead of needing applications like UnetBootin.
Should bring most of the examples into a better consistency regarding
syntactic representation in the manual.
Thanks to @devhell for reporting.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
