Tor attempts to detect what external IP address a machine is using by
listing addresses on all network interfaces on the system. This listing
is done using getifaddrs(3), which relies on netlink in order to get
IPv6 address information.
This change fixes Tor not finding the relay's IPv6 address unless
explicitly configured via either an ORPort directive or via DNS
resolution of the machine hostname.
I tried to make this as non-breaking as possible, but it will still
break things slightly for people expecting certain file names in the
packages themselves.
The previous justification for using "VERBOSE" is incorrect,
because OpenSSH does use level INFO to log "which key was used
to log in" for sccessful logins, see:
6247812c76/auth.c (L323-L328)
Also update description to the wording of the sshd_config man page.
`fail2ban` needs, sshd to be "VERBOSE" to work well, thus
the `fail2ban` module sets it to "VERBOSE" if enabled.
The docs are updated accordingly.
ChangeLog: https://github.com/privacyidea/privacyidea/releases/tag/v3.6
Unfortunately we have to use `sqlalchemy` at 1.3 for `sqlsoup`. As
`sqlalchemy` is required by a lot of packages, I decided to move this
package out of `pythonPackages` itself and instantiate a new
`pythonPackages` inside the expression where `sqlalchemy` points to
`sqlalchemy_1_3`.
While looking at the sphinx package I noticed it was heavily
undermaintained, which is when we noticed nand0p has been inactive for
roughly 18 months. It is therefore prudent to assume they will not be
maintaining their packages, modules and tests.
- Their last contribution to nixpkgs was in 2019/12
- On 2021/05/08 I wrote them an email to the address listed in the
maintainer-list, which they didn't reply to.
* add an example for services.tor.settings.HidServAuth
* fix HidServAuth validation to require ".onion"
Per https://manpages.debian.org/testing/tor/torrc.5.en.html :
> Valid onion addresses contain 16 characters in a-z2-7 plus ".onion"
some ban actions need additional packages (eg ipset). since actions can be
provided by the user we need something general that's easy to configure.
we could also enable ipset regardless of the actual configuration of the system
if the iptables firewall is in use (like sshguard does), but that seems very
clumsy and wouldn't easily solve the binary-not-found problems other actions may
also have.
it's not possible to set a different default maxretry value in the DEFAULT jail
because the module already does so. expose the maxretry option to the
configuration to remedy this. (we can't really remove it entirely because
fail2ban defaults to 5)
backends changing shouldn't be very likely, but services may well change. we
should restart sshguard from nixos-rebuild instead of merely plopping down a new
config file and waiting for the user to restart sshguard.
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
Fixes redirection after signing in when you use a single oauth2_proxy
instance for multiple domains.
X-Auth-Request-Redirect header is used to decide which URL to redirect
to after signing in. Specifying `request_uri` is enough in case you
need to redirect to the same domain that serves oauth2 callback
endpoint, but with multiple domains the you should include the scheme
and the host.
It's very surprising that services.tor.client.enable would set
services.privoxy.enable. This violates the principle of least
astonishment, because it's Privoxy that can integrate with Tor, rather
than the other way around.
So this patch moves the Privoxy Tor integration to the Privoxy module,
and it also disables it by default. This change is documented in the
release notes.
Reported-by: V <v@anomalous.eu>
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
Add the option `environmentFile` to allow passing secrets to the service
without adding them to the Nix store, while keeping the current
configuration via the existing environment file intact.
Since systemd 243, docs were already steering users towards using
`journal`:
eedaf7f322
systemd 246 will go one step further, it shows warnings for these units
during bootup, and will [automatically convert these occurences to
`journal`](f3dc6af20f):
> [ 6.955976] systemd[1]: /nix/store/hwyfgbwg804vmr92fxc1vkmqfq2k9s17-unit-display-manager.service/display-manager.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update│······················
your unit file, and consider removing the setting altogether.
So there's no point of keeping `syslog` here, and it's probably a better
idea to just not set it, due to:
> This setting defaults to the value set with DefaultStandardOutput= in
> systemd-system.conf(5), which defaults to journal.
Use StateDirectory to create necessary directories and hardcode some
paths. Also drop file based audit logs, they can be found in the
journal. And add module option deprecation messages.
This adds yubikey-agent as a package and a nixos module.
On macOS, we use `wrapProgram` to set pinentry_mac as default in PATH;
on Linux we rely on the user to set their preferred pinentry in PATH.
In particular, we use a systemd override to prefix PATH to select a
chosen pinentry program if specified.
On Linux, we need libnotify to provide the notify-send utility for
desktop notifications (such as "Waiting for Yubikey touch...").
This might work on other flavors of unix, but I haven't tested.
We reuse the programs.gnupg.agent.pinentryFlavor option for
yubikey-agent, but in doing so I hit a problem: pinentryFlavour's
default value is specified in a mkDefault, but only conditionally. We
ought to be able to pick up the pinentryFlavour whether or not gpg-agent
is running. As a result, this commit moves the default value to the
definition of programs.gnupg.agent.enable.
The current module assumes use of iptables and breaks if nftables is
used instead.
This change configures the correct backend based on the
config.networking.nftables.enable setting.
A centralized list for these renames is not good because:
- It breaks disabledModules for modules that have a rename defined
- Adding/removing renames for a module means having to find them in the
central file
- Merge conflicts due to multiple people editing the central file
When the option services.vault.storageBackend is set to "file", a
systemd.tmpfiles.rules was added, with extraneous []. These are not
needed and have been removed.
Since https://github.com/NixOS/nixpkgs/pull/61321, local-fs.target is
part of sysinit.target again, meaning units without
DefaultDependencies=no will automatically depend on it, and the manual
set dependencies can be dropped.
The fix for #62874 introduced a race condition on startup: the postStart
commands that configure the firewall run concurrently with sshguard's
creation of the ipsets that the rules depend on. Unfortunately iptables
fails hard when referencing an ipset that doesn't exist, so this causes
non-deterministic crashlooping until sshguard wins the race.
This change fixes that race condition by always creating the ipset and
reconfiguring the firewall before starting sshguard, so that the order
of operations is always deterministic.
This change also cleans up the ipsets on sshguard shutdown, so that
removing sshguard from a running system doesn't leave state behind.
Fixes#65985.
Upstream switched to a different type of ipset table, whereas we
create ipset in post-start which overrides upstream, and renders
sshguard ineffective.
Remove ipset creation from post-start, and let it get automatically
by upstream script (sshg-fw-ipset) as part of startup
This is just usbguard without the Qt GUI that brings in Qt dependencies.
Remove pandoc to reduce closure size. The usbguard build appears to
use it only for spell checking.
Remove asciidoctor because 0.7.1 switched to asciidoc. But don't add
a dependency on asciidoc, because that causes the build fails on
external DTDs.
The two directories KDB and PTree do not exist before the SKS DB is
build for the first time. If /var/db/sks is empty and the module is
enabled via "services.sks.enable = true;" the following error will
occur:
...-unit-script-sks-db-pre-start[xxx]:
ln: failed to create symbolic link 'KDB/DB_CONFIG': No such file or directory
To avoid this both links have to be created after the DB is build.
Note: Creating the directories manually might be better but the initial
build might be skipped as a result:
unit-script-sks-db-pre-start[xxxxx]: KeyDB directory already exists. Exiting.
unit-script-sks-db-pre-start[xxxxx]: PTree directory already exists. Exiting.
Unfortunately the changes in ab5dcc7068
introduced a typo (took me a while to spot that...) that broke the
whole module (or at least the sks-db systemd unit).
The systemd unit was failing with the following error message:
...-unit-script-sks-db-pre-start[xxx]: KDB/DB_CONFIG exists but is not a symlink.
1. Allow syslog identifiers with special characters
2. Do not write a pid file as we are running in foreground anyway
3. Clean up the module for readability
Without this, when deploying using nixops, restarting sshguard would make
nixops show an error about restarting the service although the service is
actually being restarted.
Tor requires ``SOCKSPort 0`` when non-anonymous hidden services are
enabled. If the configuration doesn't enable Tor client features,
generate a configuration file that explicitly includes this disabling
to allow such non-anonymous hidden services to be created (note that
doing so still requires additional configuration). See #48622.
That way the built-in web server is usable by default but users can use
$HOME/web directly (instead of having to use a symlink), if they want to
customize the webpage.
Without a group the gid will default to 65534 (2^16 - 2) which maps to
"nogroup". IMO it makes more sense to explicitly set a valid group.
Adding pkgs.sks to environment.systemPackages is not required (IIRC we
want to avoid bloating environment.systemPackages). Instead it seems
like a better idea to make the relevant binaries available to the user
sks and enable useDefaultShell so that "su -l sks" can be used for
manual interaction (that way the files will always have the correct
owner).
- based on module originally written by @srhb
- complies with available options in cfssl v1.3.2
- uid and gid 299 reserved in ids.nix
- added simple nixos test case
This reverts a part of 5bd12c694b.
Apparently there's no way to specify user for RuntimeDirectory in systemd
service file (it's always root) but tor won't create control socket if the dir
is owned by anybody except the tor user.
These hardenings were adopted from the upstream service file, checked
against systemd.service(5) and systemd.exec(5) manuals, and tested to
actually work with all the options enabled.
`PrivateDevices` implies `DevicePolicy=closed` according to systemd.exec(5),
removed.
`--RunAsDaemon 0` is the default value according to tor(5), removed.
In AdRoll/hologram#62 support was added to hologram to configure
LDAP-based authorization of which roles a user was allowed to get
credentials for. This adds the ability to configure that.
Additionally, AdRoll/hologram/#94 added support to customize the LDAP
group query, so this also feeds that configuration through.
fixes#37393
Update physlock to a more current version which supports PAM and
systemd-logind. Amongst others, this should work now with the slim
login manager without any additional configuration, because it does
not rely on the utmp mechanism anymore.
* nixos/usbguard: create package and module
No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)
* nixos/usbguard: remove extra packages
Users can override this by themselves.
* nixos/usbguard: add maintainer and fix style
