In Nixpkgs, we assume that the "config" field is a canonicalized GNU
triple. I noticed that non-canonical values were being used here,
because the pkgsCross.mips64el-linux-gnu triples did not contain the
vendor field, but the pkgsCross.mips64el-linux-gnu.pkgsStatic did.
Here, I've run all the MIPS triples in lib.systems.examples through
config.sub to canonicalize them. I think this will avoid nasty
surprises in future.
Tested by building Nix and the bootstrap files for
pkgsCross.mips64el-linux-gnu.
This has been deprecated for a long time, and it's doubtful it had any
users to start with. And having an undisablable warning when
enumarating platforms is not good.
These servers apparently no longer exist, since September 2, 2021[1].
If somebody needs this for non-Scaleway machines, they should suggest
its reintroduction with a different name.
[1]: https://news.ycombinator.com/item?id=27192757
Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
canExecute is like isCompatible, but also checks that the Kernels are
_equal_, i.e. that both platforms use the same syscall interface. This
is crucial in order to actually be able to execute binaries for the
other platform.
isCompatible is dropped, since it has changed semantically and there's
no use case left in nixpkgs.
Since we (exclusively) use isCompatible to gauge whether platform a can
execute binaries built for platform b, mode switching CPUs are not to be
considered compatible for our purposes: Switching the mode of a CPU
usually requires a reset. At the very least we can't execute a mix of
executables for the two modes which would usually be the case in nixpkgs
where we may want to execute buildInputs for the hostPlatform in
addition to nativeBuildInputs for the buildPlatform.
Since the list only gates the platforms the nixpkgs flake exposes
packages to build on, the `hydra` label made little sense. It was also
only used for this purpose, so the `tier*` attributes were largely
unnecessary.
To reflect the intention more accurately, we expose
`lib.systems.flakeExposed` and use it to gate flake.nix's system list.
This patch causes the autodetection code in lib/systems/platforms.nix
to return {} if it cannot detect the platform and one of the
platform.nix-detection-provided attributes (linux-kernel, gcc, and
rustc) are accessed, rather than silently assuming the "pc" platform
as was previously done.
It is definitely safe to assume that code using these attributes is
prepared to deal with `gcc` and `rustc` not being defined, because
many of the working entries in this file don't define it.
Regarding `linux-kernel` the situation is less certain, but some code
(`lib/systems/default.nix` for example) is already designed to deal
with that attribute being missing. At worst it would result in an
"attribute not found" error.
While adding mips64el bootstrap support to nixpkgs, the silent
assumption that mips64el routers are actually Intel PCs caused
significant frustration. This commit removes that assumption in order
to save people who port nixpkgs to new platforms in the future from
this frustration.
For other platforms like Intel and ARM, we can do
e.g. lib.platforms.aarch64 to get only the 64-bit ARM platorms, but
until now there were no equivalents for RISC-V.
Prior to this commit, nixpkgs would assume that every little-endian
mips32 system was a "fuloong2f_n32".
Not only are there plenty of mips32 chips other than the fuloong, but
the fuloong is actually a mips64 chip! Note that the "n32" ABI is
(confusingly) an ABI for 64-bit mips chips (like the "x32" ABI for
amd64 chips -- both are ABIs which use 32-bit pointers on an
otherwise-64-bit system).
This error causes far-ranging problems. One of them was particularly
difficult to track down: it caused GCC to select 128-bit `long double`
types, which is invalid for the mips32 ABI. This isn't noticed until
you try to build musl-libc, which is careful to check for these things.
Prior to this commit,
nix-build . -A pkgsCross.mipsel-linux-gnu.pkgsStatic.hello
would fail. With this commit and #170736, it succeeds.
There is only one ABI for 32-bit MIPS chips. Before mips64, it didn't
really have a name.
The 64-bit MIPS ABI comes in two flavors, "n64" and "n32". It is
commonplace to refer to the old 32-bit ABI as "o32" (MIPS and SGI
documents do this).
However, when configuring gcc, one must use --with-abi=32, not
--with-abi=o32.
Let's keep GCC happy with this commit.
This commit adds an `isPower64` predicate to the two existing
predicates for this architecture (`isPower` and `isPowerPC`).
Note that `isPowerPC` matches only 32-bit machines, whereas `isPower`
matches both 64-bit and 32-bit machines. Prior to this commit there
was no single `isXXX` predicate for `powerpc64le`.
MIPS has a large space of {architecture,abi,endianness}; this commit
adds all of them to lib/systems/platforms.nix so we can be done with
it.
Currently lib/systems/inspect.nix has a single "isMips" predicate,
which is a bit ambiguous now that we will have both mips32 and mips64
support, with the latter having two ABIs. Let's add four new
predicates (isMips32, isMips64, isMips64n32, and isMips64n64) and
treat the now-ambiguous isMips as deprecated in favor of the
more-specific predicates. These predicates are used mainly for
enabling/disabling target-specific workarounds, and it is extremely
rare that a platform-specific workaround is needed, and both mips32
and mips64 need exactly the same workaround.
The separate predicates (isMips64n32 and isMips64n64) for ABI
distinctions are, unfortunately, useful. Boost's user-scheduled
threading (used by nix) does does not currently supports mips64n32,
which is a very desirable ABI on routers since they rarely have
more than 2**32 bytes of DRAM.
While it is a fact of life that aarch64-darwin is built on Hydra, it has
never formally been elevated from the Tier 7 state it was originally
assigned in RFC 0046. Since platform Tier status is not only
descriptive, but also normative, a consensus to commit to supporting
aarch64-darwin would need to be reached.
PowerNV was looking for a nonexisting zImage file.
Remove unnecessary .file / .installTarget.
Also add config options needed for default minimal
NixOS config and QEMU VirtIO/VirtFS devices.
This allows checking e.g. stdenv.hostPlatform.isGnu, just like isMusl
or isUClibc. It was already possible to check for glibc with
stdenv.hostPlatform.libc == "glibc", but when that doesn't line up
with how every other platform check works, this is apparently
sufficiently non-obvious that we've ended up with stuff like adding
glibc.static if !isMusl, which is obviously wrong.
This regressed in 9c213398b3
The recursiveUpdate gave the platform both gcc.cpu and gcc.arch attrs
instead of only gcc.cpu. This is invalid; gcc configuration fails with:
```
Switch "--with-arch" may not be used with switch "--with-cpu"
```
So we revert to using `//` to retain only gcc.cpu
(which is more specific than the processor arch).
m68k was recently added for Linux and none, but NetBSD also supports
m68k. Nothing will build yet, but I want to make sure we at least
encode the existence of NetBSD support for every applicable
architecture we support for other operating systems.
In Autoconf, some old NetBSD targets like "i686-unknown-netbsd" are
interpreted as a.out, not elf, and virtually nothing supports it. We
need to specify e.g. "i686-unknown-netbsdelf" to get the right
behaviour.
Newer bootloaders for RISC-V (i.e., OpenSBI + U-Boot) support
flat and compressed kernel images but not vmlinux. Therefore,
let's build "Image" like what we do with aarch64.
Also copy DTBs while we are at it.
This will begin the process of breaking up the `useLLVM` monolith. That
is good in general, but I hope will be good for NetBSD and Darwin in
particular.
Co-authored-by: sterni <sternenseemann@systemli.org>
Stating that CPUs and the isCompatible relation forms a category (or
preorder) is correct but overtly technical. We can state it more
clearly for readers unfamiliar with mathematics while retaining some
keywords to be useful to technical readers.
This PR adds a new aarch64 android toolchain, which leverages the
existing crossSystem infrastructure and LLVM builders to generate a
working toolchain with minimal prebuilt components.
The only thing that is prebuilt is the bionic libc. This is because it
is practically impossible to compile bionic outside of an AOSP tree. I
tried and failed, braver souls may prevail. For now I just grab the
relevant binaries from https://android.googlesource.com/.
I also grab the msm kernel sources from there to generate headers. I've
included a minor patch to the existing kernel-headers derivation in
order to expose an internal function.
Everything else, from binutils up, is using stock code. Many thanks to
@Ericson2314 for his help on this, and for building such a powerful
system in the first place!
One motivation for this is to be able to build a toolchain which will
work on an aarch64 linux machine. To my knowledge, there is no existing
toolchain for an aarch64-linux builder and an aarch64-android target.
These are all the architectures supported by Nixpkgs on other
platforms, that are also supported by NetBSD. (So I haven't added
any architectures that are new to Nixpkgs here, even though NetBSD
supports some that we don't have.)
The previous mess was partially grouped by OS, and partially grouped
by architecture, which made it very difficult to know where to add new
entries.
I've chosen to group by OS entirely, because OSes are likely to
maintain exhaustive lists of supported architectures, but it's far
less likely we'd be able to find exhaustive lists of supported OSes
for every architecture.
Forcing the module to be builtin breaks 5.10, which wants to compile it as a
module (probably due to dependencies). There doesn't seem to be a need to have
it builtin anymore, so we can just remove the override.
In 9c213398b3 kernelPreferBuiltin was
moved/renamed to linux-kernel.preferBuiltin. However, for
armv7l-hf-multiplatform the new option was written with an uppercase P,
which made the kernel build process ignore it.
PPC64 supports two ABIs: ELF v1 and v2.
ELFv1 is historically what GCC and most packages expect, but this is
changing because musl outright does not work with ELFv1. So any distro
which uses musl must use ELFv2. Many other platforms are moving to ELFv2
too, such as FreeBSD (as of v13) and Gentoo (as of late 2020).
Since we use musl extensively, let's default to ELFv2.
Nix gives us the power to specify this declaratively for the entire
system, so ELFv1 is not dropped entirely. It can be specified explicitly
in the target config, e.g. "powerpc64-unknown-linux-elfv1". Otherwise the
default is "powerpc64-unknown-linux-elfv2". For musl,
"powerpc64-unknown-linux-musl" must use elfv2 internally to function.
Looks like these got left behind in the
kernelArch -> linuxArch migration.
Fixes:
* pkgsCross.powernv.linuxHeaders
* pkgsCross.riscv64.linuxHeaders
* pkgsCross.riscv32.linuxHeaders
and dependees
