Increase schedulingPriority of the bootstrap tools to unblock the
nixpkgs-unstable channel.
The channel is repeatedly blocked by the makeBootstrapTools job for
aarch64. The cause is lack of resources.
By increasing the priority, it should become the first job Hydra would
build, allowing the channel to advance quicker. Of course, it does mean
that while the channel advances, nothing else has been built.
This should be a temporary solution until we have more capacity for
aarch64.
The dynamic loader on powerpc64 is called ld64.so.2 rather than
ld-linux.so.*, and was not matched by the existing pattern.
We reuse the dynamicLinker name from binutils to match a wider set
of platforms and to avoid specifying this information in two places.
These files never existed, so best to not leave the reference. If
someone want to step up to maintain this, that would be fine. I don’t
have the hardware to test these out. In addition, someone tried to use
the bootstrap-tools currently built by Hydra and found that they were
broken in some unclear way.
The linker scripts no longer contain store paths, so this does nothing. More
importantly, libpthread.so is not longer a linker script on ARM, so the patching
would corrupt it.
There's a generated header that got comment about the source header
from glibc.dev, which added unwanted runtime dependency. Tested:
nix build -f pkgs/top-level/release.nix stdenvBootstrapTools.{aarch64,i686,x86_64}-linux.test
Apparently this option trades compression time for size,
and explicitly does so without increasing resources needed in decomp.
Doesn't make tarball creation unbearable, so add it to options!
crossOverlays only apply to the packages being built, not the build
packages. It is useful when you don’t care what is used to build your
packages, just what is being built. The idea relies heavily on the
cross compiling infrastructure. Using this implies that we need to
create a cross stdenv.
Since gcc.lib/lib64 is a symlink to 'lib', the use of
"lib*/libgcc_s.so*" triggered a warning (error) with
the latest coreutils. Essentially we were doing:
$ cp a/x b/x y/
And latest coreutils rejects such invocations.
Just copy from 'lib', lib64 is a link to it anyway.
* Nothing else in this file bothers looking at lib*
* AFAICT lib* only ever possibly matched lib64 anyway
02c09e0171 (NixOS/nixpkgs#44558) was reverted in
c981787db9 but, as it turns out, it fixed an issue
I didn't know about at the time: the values of `propagateDoc` options were
(and now again are) inconsistent with the underlying things those wrappers wrap
(see NixOS/nixpkgs#46119), which was (and now is) likely to produce more instances
of NixOS/nixpkgs#43547, if not now, then eventually as stdenv changes.
This patch (which is a simplified version of the original reverted patch) is the
simplest solution to this whole thing: it forces wrappers to directly inspect the
outputs of the things they are wrapping instead of making stdenv guess the correct
values.
This reverts commit a809fdc8e1 and then
achieves the same result (not rebuilding texinfo three times)
but without dragging bootstrap tools into the closure.
As in:
$ nix eval -f . bash
Also remove the glibc propagation inherit that made these necessary,
stages handle propagating libc themselves (apparently) and
AFAICT no hashes are changed as a result of this.
Since at least d7bddc27b2, we've had a
situation where one should depend on:
- `stdenv.cc.bintools`: for executables at build time
- `libbfd` or `libiberty`: for those libraries
- `targetPackages.cc.bintools`: for exectuables at *run* time
- `binutils`: only for specifically GNU Binutils's executables,
regardless of the host platform, at run time.
and that commit cleaned up this usage to reflect that. This PR flips the
switch so that:
- `binutils` is indeed unconditionally GNU Binutils
- `binutils-raw`, which previously served that role, is gone.
so that the correct usage will be enforced going forward and everything
is simple.
N.B. In a few cases `binutils-unwrapped` (which before and now was
unconditionally actual GNU binutils), rather than `binutils` was used to
replace old `binutils-raw` as it is friendly towards some cross
compilation usage by avoiding a reference to the next bootstrapping
change.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
We go out of our way (see top of file) to build a single binary
with symlinks for all of the tools, but were losing them
when preparing the bootstrap tools.
For the cc of the intermediate stages, to be precise. Doing the same for
bintools requires lots of refactoring.
This is mainly for the future extensibility as now you can change
documentation generation with impunity without rebuilding the
whole of stdenv.
Existing "mips64el" should be "mipsel".
This is just the barest minimum so that nixpkgs can recognize them as
systems - although required for building individual derivations onto
MIPS boards, it is not sufficient if you want to actually build nixos on
those targets
Aarch64 tools tested briefly with qemu-aarch64,
but neither have been actually used yet :).
For now only "host" indirectly via binary cache
at cache.allvm.org.
cc-wrapper may wrap a cc-compiler, but it doesn't need one to build
itself. (c.f. expand-response-params is a separate derivation.) This
helps avoid cycles on the cross stuff, in addition to removing a
useless dependency edge.
I could have been super careful with overrides in the stdenv to avoid
the mass rebuild, but I don't think it's worth it.
This is needed when cross-compiling for iOS (Aarch64 + Darwin). I also
changed the syntax of the Linux stdenv for visual consistency, though
that has no effect on semantics as the os is already guaranteed to be
Linux.
This reverts commit 0a944b345e, reversing
changes made to 61733ed6cc.
I dislike these massive stdenv changes with unclear motivation,
especially when they involve gratuitous mass renames like NIX_CC ->
NIX_BINUTILS. The previous such rename (NIX_GCC -> NIX_CC) caused
months of pain, so let's not do that again.
- Don't build with libsigsegv by default. The build apparently attempted
to link against it, but it never retained the reference anyway...
- Side effect: stdenv bootstrapping needs no libsigsegv anymore.
- Run checks, but only in the interactive gawk by default on Linux,
so that stdenv bootstrap isn't slowed down (by glibc locales, etc.).
- xz should be no longer needed in inputs, as we have it in stdenvs now.
The whole change was triggered by some used kernel versions still
breaking libsigsegv tests #28464.
This reverts commit eeabf85780.
This change suddenly makes tons of stdenv internals visible in
nativeBuildInputs of every derivation, which doesn't seem desirable.
E.g:
````
nix-repl> hello.nativeBuildInputs
[ «derivation /nix/store/bcfkyf6bhssxd2vzwgzmsbn7b5b9rpxc-patchelf-0.9.drv»
«derivation /nix/store/4wnshnz9wwanpfzcrdd76rri7pyqn9sk-paxctl-0.9.drv»
<< snip 10+ lines >>
«derivation /nix/store/d35pgh1lcg5nm0x28d899pxj30b8c9b2-gcc-wrapper-6.4.0.drv»
]
````
Additionally, instead of pulling them from `setup.sh`, route them via
Nix. This gets us one step closer to making stdenv be a plain attribute
set instead of a derivation.
`pkgsNoParams` was removed by me, but then #25035 was merged using it,
leading to an unbound identifier.
It would be nice to get travis to do build release-cross.nix or
something to catch these things.
Use `buildPackages.binutils` to get build = host != target binutils,
i.e. the old `binutilsCross`, and use
`buildPackages.buildPackages.binutils` to get build = host = target
binutils, i.e. the old `binutils`.
`buildPackages` chains like this are supposed to remove the need for
all such `*Cross` derivations. We start with binutils because it's
comparatively easy.
No hashes of cross-tests should be changed
Before all overrides were also pruned in the previous stage, now
only gcc and binutils are, because they alone care about about the
target platform. The rest of the overrides don't, so it's better to
preserve them in order to avoid spurious rebuilds.
Our bootstrap tools are actually broken right now due to busybox not
working when invoked directly from a store path. (It says e.g.
"0qqqw19y4gmknajw8vg4fvhx9gxdqlhz-busybox: applet not found").
Make this test actually fail in such case, the next commit will fix the
problem with busybox.
This is required for Aarch64 since a lot of source tarballs ship with
outdated configure scripts that don't recognize aarch64. Simply
replacing the config.guess and config.sub with new versions from
upstream makes them build again.
This same approach is used by at least Buildroot and Fedora. In
principle this could be enabled for all architectures but
conditionalizing this on aarch64 avoids a mass rebuild on x86.
The long term goal is a big replace:
{ inherit system platform; } => buildPlatform
crossSystem => hostPlatform
stdenv.cross => targetPlatform
And additionally making sure each is defined even when not cross compiling.
This commit refactors the bootstrapping code along that vision, but leaves
the old identifiers with their null semantics in place so packages can be
modernized incrementally.
[N.B., this package also applies to the commits that follow it in the same
PR.]
In most cases, buildPackages = pkgs so things work just as before. For
cross compiling, however, buildPackages is resolved as the previous
bootstrapping stage. This allows us to avoid the mkDerivation hacks cross
compiling currently uses today.
To avoid a massive refactor, callPackage will splice together both package
sets. Again to avoid churn, it uses the old `nativeDrv` vs `crossDrv` to do
so. So now, whether cross compiling or not, packages with get a `nativeDrv`
and `crossDrv`---in the non-cross-compiling case they are simply the same
derivation. This is good because it reduces the divergence between the
cross and non-cross dataflow. See `pkgs/top-level/splice.nix` for a comment
along the lines of the preceding paragraph, and the code that does this
splicing.
Also, `forceNativeDrv` is replaced with `forceNativePackages`. The latter
resolves `pkgs` unless the host platform is different from the build
platform, in which case it resolves to `buildPackages`. Note that the
target platform is not important here---it will not prevent
`forcedNativePackages` from resolving to `pkgs`.
--------
Temporarily, we make preserve some dubious decisions in the name of preserving
hashes:
Most importantly, we don't distinguish between "host" and "target" in the
autoconf sense. This leads to the proliferation of *Cross derivations
currently used. What we ought to is resolve native deps of the cross "build
packages" (build = host != target) package set against the "vanilla
packages" (build = host = target) package set. Instead, "build packages"
uses itself, with (informally) target != build in all cases.
This is wrong because it violates the "sliding window" principle of
bootstrapping stages that shifting the platform triple of one stage to the
left coincides with the next stage's platform triple. Only because we don't
explicitly distinguish between "host" and "target" does it appear that the
"sliding window" principle is preserved--indeed it is over the reductionary
"platform double" of just "build" and "host/target".
Additionally, we build libc, libgcc, etc in the same stage as the compilers
themselves, which is wrong because they are used at runtime, not build
time. Fixing this is somewhat subtle, and the solution and problem will be
better explained in the commit that does fix it.
Commits after this will solve both these issues, at the expense of breaking
cross hashes. Native hashes won't be broken, thankfully.
--------
Did the temporary ugliness pan out? Of the packages that currently build in
`release-cross.nix`, the only ones that have their hash changed are
`*.gcc.crossDrv` and `bootstrapTools.*.coreutilsMinimal`. In both cases I
think it doesn't matter.
1. GCC when doing a `build = host = target = foreign` build (maximally
cross), still defines environment variables like `CPATH`[1] with
packages. This seems assuredly wrong because whether gcc dynamically
links those, or the programs built by gcc dynamically link those---I
have no idea which case is reality---they should be foreign. Therefore,
in all likelihood, I just made the gcc less broken.
2. Coreutils (ab)used the old cross-compiling infrastructure to depend on
a native version of itself. When coreutils was overwritten to be built
with fewer features, the native version it used would also be
overwritten because the binding was tight. Now it uses the much looser
`BuildPackages.coreutils` which is just fine as a richer build dep
doesn't cause any problems and avoids a rebuild.
So, in conclusion I'd say the conservatism payed off. Onward to actually
raking the muck in the next PR!
[1]: https://gcc.gnu.org/onlinedocs/gcc/Environment-Variables.html
This patch add a new argument to Nixpkgs default expression named "overlays".
By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`. If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory. If the home directory does not exists it will
fallback on an empty list of overlays.
The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages. The overlays, i-e directory, files, symbolic links
are used in alphabetical order.
The simplest overlay which extends Nixpkgs with nothing looks like:
```nix
self: super: {
}
```
More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.
An example of overlay which extends Nixpkgs with a small set of packages can be found at:
https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix
To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
`gcc-unwrapped` basically replaces `gccPlain`. It may seem like an ugly
polution to stick it in all-packages, but a future PR will enshrine this
`*-unwrapped` pattern. In any event, the long term goal is stdenvs might
need to tweak how compilers are booted and wrapped, but the code to build
the unwrapped compilers themselves should be generic.
Introduce new abstraction, `stdenv/booter.nix` for composing bootstraping
stages, and use it everywhere for consistency. See that file for more doc.
Stdenvs besides Linux and Darwin are completely refactored to utilize this.
Those two, due to their size and complexity, are minimally edited for
easier reviewing.
No hashes should be changed.
On one hand, don't want to pass garbage that affects hash, on the other
hand footguns are bad.
Now, factored out the derivation so only need to pass in what is used.
- The darwin test can now force the use of the freshly-booted darwin stdenv
- The linux test now passes enough dummy arguments
This may make debugging harder, if so, check out #20889
- Non-cross stdenvs are honest and assert that `crossSystem` is null
- `crossSystem` is a mandatory argument to top-level/stage.nix, just like
`system` and `platform`
- Broken default arguments on stdenvs for testing are gone.
- All stdenvs (but little-used stdenvNix) take the same arguments for easy
testing.
This makes the flow of data easier to understand. There's little downside
because the args in question are already inspected by the stdenvs.
cross-compiling in particular is simpler because we don't need to worry
about overriding the config closed over by `allPackages`.
This commit changes the dependencies of stdenv, and clean-up the stdenv
story by removing the `defaultStdenv` attribute as well as the `bootStdenv`
parameter.
Before, the final bootstrapping stage's stdenv was provided by
all-packages, which was iterating multiple times over the
top-level/default.nix expression, and non-final bootstrapping stages'
stdenvs were explicitly specified with the `bootStdenv` parameter.
Now, all stages' stdenvs are specified with the `stdenv` parameter.
For non-final bootstrapping stages, this is a small change---basically just
rename the parameter.
For the final stage, top-level/default.nix takes the chosen stdenv and
makes the final stage with it.
`allPackages` is used to make all bootstrapping stages, final and
non-final alike. It's basically the expression of `stage.nix` (along with a
few partially-applied default arguments)
Note, the make-bootstrap-tools scripts are temporarily broken
I broke this in the cleanups I did in 171c7f0, the gcc inside the bootstrap
tarball is not getting built with the correct --with-fpu, --with-float
etc. options.
- cloog, ppl, cloogppl aren't used by recent GCCs. Kill references to them.
- Use correct versions of isl, as the current GCC depends
on non-default versions of them.
- Also clarify isl dynamic libraries are needed in cross
builds, but not in native builds
- Since aeb3d8c (bzip2: fix cross build on mingw by using autoconf patch),
it seems that the bzip2 binary depends on libbz2 when cross compiling.
So copy libbz2 into the bootstrap tarball as well.
- Curl isn't used in the bootstrap tools since e6f61b4cf3.
Our coreutils now uses single-binary-build mode where, by default,
simple shebang scripts are used for all the binaries. That doesn't work
e.g. with the Linux unpacker which only handles standard binaries and
symlinks. Let's use the symlinked mode instead for boostrapping.
This does NOT change any stdenv hashes.
I only tested the case most important to me:
$ nix-build pkgs/top-level/release.nix -A stdenvBootstrapTools.x86_64-linux.test
For some reason, the current bootstrap tools fail to build gettext:
init2.c:37: MPFR assertion failed: (64 - 0) == ((64 - 0)/8) * 8 && sizeof(mp_limb_t) == ((64 - 0)/8)
libxml/xpath.c: In function 'xmlXPathCompPathExpr':
libxml/xpath.c:10627:1: internal compiler error: Aborted
xmlXPathCompPathExpr(xmlXPathParserContextPtr ctxt) {
^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
make[5]: *** [libxml/libxml_rpl_la-xpath.lo] Error 1
I didn't investigate why this is the case but rebuilding the bootstrap
tools seems to help.
I used this old-ish WIP branch https://github.com/dezgeg/nixpkgs/commits/arm-bootstrap
since latest master has even more problems with cross-compiling anything.
(I will eventually push this stuff and make the ARM bootstraps build on hydra.)
