The new systemd in 19.09 gives an "Access Denied" error when doing
"systemctl daemon-reexec" on an 19.03 system. The fix is to use the
previous systemctl to signal the daemon to re-exec itself. This
ensures that users don't have to reboot when upgrading from NixOS
19.03 to 19.09.
Add support for custom device-tree files, and applying overlays to them.
This is useful for supporting non-discoverable hardware, such as sensors
attached to GPIO pins on a Raspberry Pi.
This change was only a temporary workaround and isn't required anymore,
since /etc/systemd/system/system.slice should not be present on any
recent NixOS system (which makes this change a no-op).
This reverts commit 7098b0fcdf.
The autoupgrade service defined in `system.autoUpgrade`
(`nixos/modules/installer/tools/auto-upgrade.nix`) doesn't have `su` in
its path and thus yields a warning during the `daemon-reload`.
Specifying the absolute path fixes the issue.
Fixes#47648
I think pam_lastlog is the only thing that writes to these files in
practice on a modern Linux system, so in a configuration that doesn't
use that module, we don't need to create these files.
I used tmpfiles.d instead of activation snippets to create the logs.
It's good enough for upstream and other distros; it's probably good
enough for us.
Nix 2.0 no longer uses these directories.
/run/nix/current-load was moved to /nix/var/nix/current-load in 2017
(Nix commit d7653dfc6dea076ecbe00520c6137977e0fced35). Anyway,
src/build-remote/build-remote.cc will create the current-load directory
if it doesn't exist already.
/run/nix/remote-stores seems to have been deprecated since 2014 (Nix
commit b1af336132cfe8a6e4c54912cc512f8c28d4ebf3) when the documentation
for $NIX_OTHER_STORES was removed, and support for it was dropped
entirely in 2016 (Nix commit 4494000e04122f24558e1436e66d20d89028b4bd).
or else at least the following config will fail with an evaluation error
instead of an assert
```
{
services.nixosManual.enable = false;
services.nixosManual.showManual = true;
}
```
This fixes an issue with shells like fish that are not fully POSIX
compliant. The syntax `ENV=val cmd' doesn't work properly in there.
This issue has been addressed in #45932 and #45945, however it has been
recommended to use a single shell (`stdenv.shell' which is either
`bash' or `sh') to significantly reduce the maintenance overload in the
future.
See https://github.com/NixOS/nixpkgs/issues/45897#issuecomment-417923464Fixes#45897
/cc @FRidh @xaverdh @etu
The instructions to install nixos behind a proxy were not clear. While
one could guess that setting http_proxy variables can get the install
rolling, one could end up with an installed system where the proxy
settings for the nix-daemon are not configured.
This commit updates the documentation with
1. steps to install behind a proxy
2. configure the global proxy settings so that nix-daemon can access
internet.
3. Pointers to use nesting.clone in case one has to use different proxy
settings on different networks.
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
This allows a developer to better identify in which snippet the
failure happened. Furthermore, users seeking help will have more
information available about the failure.
Problem: Restarting (stopping) system.slice would not only stop X11 but
also most system units/services. We obviously don't want this happening
to users when they switch from 18.03 to 18.09 or nixos-unstable.
Reason: The following change in systemd:
d8e5a93382
The commit adds system.slice to the perpetual units, which means
removing the unit file and adding it to the source code. This is done so
that system.slice can't be stopped anymore but in our case it ironically
would cause this script to stop system.slice because the unit file was
removed (and an older systemd version is still running).
Related issue: https://github.com/NixOS/nixpkgs/issues/39791
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
Fixes#28443
Fixed few invocations to `systemctl` to have an absolute path. Additionally add
LOCALE_ARCHIVE so that perl stops spewing warning messages.
We only care about /nix/store because its contents might be out of
sync with /nix/var/nix/db. Syncing other filesystems might cause
unnecessary delays or hangs (e.g. I encountered a case where an NFS
mount was taking a very long time to sync).
This fixes two bugs:
* When socket activation is detected, the service itself is added to stop-start list instead of its sockets.
* When service is marked to restart instead of stop (`StopIfChanged = no`) we don't need to restart sockets.
This is a standard environment that doesn't contain a C/C++
compiler. This is mostly to prevent trivial builders like runCommand
and substituteAll from pulling in gcc for simple configuration changes
on NixOS.
Using "tmpfs" as a script part for system.activationScripts is a bit
misleading since 6efcfe03ae.
We no longer solely mount tmpfs within this script, so using "specialfs"
fits more nicely in terms of naming.
Tested against the "simple" NixOS installer test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by 79d4636d50.
The mentioned commit moves /run/keys from stage 2 to
boot.specialFileSystems, the latter being remounted during system
activation.
Unfortunately, the specialMount function in the activation script does
this unconditionally and thus will fail if it can't be remounted because
the mount point simply doesn't exist.
We now check the mount point for existance and only remount if it exists
but mkdir + mount it if it doesn't.
Tested against the "simple" NixOS installer test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
A new internal config option `fileSystems.<name>.early` is added to indicate
that the filesystem needs to be loaded very early (i.e. in initrd). They are
transformed to a shell script in `system.build.earlyMountScript` with calls to
an undefined `specialMount` function, which is expected to be caller-specific.
This option is used by stage-1, stage-2 and activation script to set up and
remount those filesystems. Options for them are updated according to systemd
defaults.
Fixes issue when upgrading from very old NixOS systems that don't have
systemd-escape in $PATH:
$ sudo nixos-rebuild switch
...
building the system configuration...
updating GRUB 2 menu...
Can't exec "systemd-escape": No such file or directory at /nix/var/nix/profiles/system/bin/switch-to-configuration line 264.
Unable to escape /!
It's not entirely clear why this happens, but sometimes /proc/1/exe
returns a bogus value, like
/ar3a3j6b9livhy5fcfv69izslhgk4gcz-systemd-217/lib/systemd/systemd. In
any case, we can just conservatively assume that we need to restart
systemd when this happens.
Fixes#10261.
- add missing types in module definitions
- add missing 'defaultText' in module definitions
- wrap example with 'literalExample' where necessary in module definitions
Setting nixosVersion to something custom is useful for meaningful GRUB
menus and /nix/store paths, but actuallly changing it rebulids the
whole system path (because of `nixos-version` script and manual
pages). Also, changing it is not a particularly good idea because you
can then be differentitated from other NixOS users by a lot of
programs that read /etc/os-release.
This patch introduces an alternative option that does all you want
from nixosVersion, but rebuilds only the very top system level and
/etc while using your label in the names of system /nix/store paths,
GRUB and other boot loaders' menus, getty greetings and so on.
Clearly it would be the best if we'd directly generate mount units
instead of converting /etc/fstab. But in order to do that we need to
test it throughly so this approach is for the next stable release.
This fix however is intended for inclusion into release-14.12 and
release-15.09.
Using a simple regular expression unfortunately isn't sufficient for
proper mount unit name quoting/escaping and there is a utility in
systemd called systemd-escape which does nothing less than that.
Of course, using an external program to escape the unit name is way more
expensive and causes us to fork for each mount point.
But given that we already do quite a lot of forks just for unit starting
and stopping, I think it doesn't matter that much. Well, except if you
have a whole bunch of mount points.
However, if the latter is the case and you have thousands of mount
points, you probably have stumbled over this already if your mount point
contains a dash.
As for my motivation to fix this: I've stumbled on this while trying to
fix the "none" backend test for NixOps (see NixOS/nixops#350), where the
target machines use /nix/.ro-store and /nix/.rw-store as mount points.
The implementation we had so far did improperly escape it so those mount
points got the following unit files:
* nix-.ro-store.mount
* nix-.rw-store.mount
The correct names for these units are however:
* nix-.ro\x2dstore.mount
* nix-.rw\x2dstore.mount
So using systemd-escape now properly generates these names.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This fixes a failing assert in systemd-timesyncd (issue #5913) as it
expects the directory /run/systemd/netif/links/ to exist, and nothing in
NixOS currently creates it.
Also we get a net reduction in our code as rules for /run/utmp and
/var/log/journal are also provided by the same upstream file.
(cherry picked from commit a278a9224a)
Many bus clients get hopelessly confused when dbus-daemon is
restarted. So let's not do that.
Of course, this is not ideal either, because we end up stuck with a
possibly outdated dbus-daemon. But that issue will become irrelevant
in the glorious kdbus-based future.
Hopefully this also gets rid of systemd getting stuck after
dbus-daemon is restarted:
Apr 01 15:37:50 mandark systemd[1]: Failed to register match for Disconnected message: Connection timed out
Apr 01 15:37:50 mandark systemd[1]: Looping too fast. Throttling execution a little.
Apr 01 15:37:51 mandark systemd[1]: Looping too fast. Throttling execution a little.
...
Since we restart all active target units (of which there are many),
it's hard to see the units that actually matter. So don't print that
we're starting target units that are already active.
‘nixos-rebuild dry-activate’ builds the new configuration and then
prints what systemd services would be stopped, restarted etc. if the
configuration were actually activated. This could be extended later to
show other activation actions (like uids being deleted).
To prevent confusion, ‘nixos-rebuild dry-run’ has been renamed to
‘nixos-rebuild dry-build’.
Now that dbus reload has been moved before restarting units,
the reload may fail if dbus has been stopped before.
The reload-or-restart will reload dbus if it's active,
otherwise start it.
Otherwise, when switching from systemd 203 to 212, you get errors like:
Failed to stop remote-fs.target: Bad message
Failed to stop systemd-udevd-control.socket: Bad message
...
This seems to have combined badly with the systemd upgrade, we'll revert
for now and revisit after the 14.04 branch.
This reverts commit ad80532881, reversing
changes made to 1c5d3c7883.
If you define a unit, and either systemd or a package in
systemd.packages already provides that unit, then we now generate a
file /etc/systemd/system/<unit>.d/overrides.conf. This makes it
possible to use upstream units, while allowing them to be customised
from the NixOS configuration. For instance, the module nix-daemon.nix
now uses the units provided by the Nix package. And all unit
definitions that duplicated upstream systemd units are finally gone.
This makes the baseUnit option unnecessary, so I've removed it.
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
switch-to-configuration.pl is currently hard-coded to assume that if a
unit is in the "auto-restart" state that something has gone wrong, but
this is not strictly true. For example, I run offlineimap as a oneshot
service restarting itself every minute (on success). NixOS currently
thinks that offlineimap has failed to start as it enters the
auto-restart state, because it doesn't consider why the unit failed.
This commit changes switch-to-configuration.pl to inspect the full
status of a unit in auto-restart state, and now only considers it failed
if the ExecMainStatus is non-zero.
Currently switch-to-configuration.pl uses system() calls to interact
with DBus. This can be error prone, especially when we are parsing
output that could change. In this commit, almost all calls to the
systemctl binary have been replaced with equivalent operations via DBus.
You can now say:
systemd.containers.foo.config =
{ services.openssh.enable = true;
services.openssh.ports = [ 2022 ];
users.extraUsers.root.openssh.authorizedKeys.keys = [ "ssh-dss ..." ];
};
which defines a NixOS instance with the given configuration running
inside a lightweight container.
You can also manage the configuration of the container independently
from the host:
systemd.containers.foo.path = "/nix/var/nix/profiles/containers/foo";
where "path" is a NixOS system profile. It can be created/updated by
doing:
$ nix-env --set -p /nix/var/nix/profiles/containers/foo \
-f '<nixos>' -A system -I nixos-config=foo.nix
The container configuration (foo.nix) should define
boot.isContainer = true;
to optimise away the building of a kernel and initrd. This is done
automatically when using the "config" route.
On the host, a lightweight container appears as the service
"container-<name>.service". The container is like a regular NixOS
(virtual) machine, except that it doesn't have its own kernel. It has
its own root file system (by default /var/lib/containers/<name>), but
shares the Nix store of the host (as a read-only bind mount). It also
has access to the network devices of the host.
Currently, if the configuration of the container changes, running
"nixos-rebuild switch" on the host will cause the container to be
rebooted. In the future we may want to send some message to the
container so that it can activate the new container configuration
without rebooting.
Containers are not perfectly isolated yet. In particular, the host's
/sys/fs/cgroup is mounted (writable!) in the guest.
The major changes are:
* The evaluation is now driven by the declared options. In
particular, this fixes the long-standing problem with lack of
laziness of disabled option definitions. Thus, a configuration like
config = mkIf false {
environment.systemPackages = throw "bla";
};
will now evaluate without throwing an error. This also improves
performance since we're not evaluating unused option definitions.
* The implementation of properties is greatly simplified.
* There is a new type constructor "submodule" that replaces
"optionSet". Unlike "optionSet", "submodule" gets its option
declarations as an argument, making it more like "listOf" and other
type constructors. A typical use is:
foo = mkOption {
type = type.attrsOf (type.submodule (
{ config, ... }:
{ bar = mkOption { ... };
xyzzy = mkOption { ... };
}));
};
Existing uses of "optionSet" are automatically mapped to
"submodule".
* Modules are now checked for unsupported attributes: you get an error
if a module contains an attribute other than "config", "options" or
"imports".
* The new implementation is faster and uses much less memory.
