Creates unnecessary cruft in the root users home directory, which we
really don't need. Except the log, but therefore we now cat the log to
stderr and the private temporary directory is cleaned up afterwards.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Essentially adds two more VirtualBox VMs to the test and also increases
the memory size of the qemu VM to 768 MB to make sure we don't run out
of memory too soon.
We're testing whether those two VMs can talk to either each other
(currently via ICMP only) or to/from the host via TCP/IP.
Also, this restructures the VM test a bit, so that we now pass in a
custom stage2Init script that has access to the store via a private
mount over the /nix/store that's already in the initrd. The reason why
this is a private mount is that we don't want to shadow the Nix store of
the initrd, essentially breaking cleanup functionality after the custom
stage 2 script (currently this is only "poweroff -f").
Note that setting the hostname inside the VirtualBox VM is *not* for
additional fanciness but to produce a different store path for the VM
image, so that VirtualBox doesn't bail out when trying to use an image
which is already attached to another VM.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're going to create more than one VirtualBox VM, so let's dynamically
generate subs specific to a particular VirtualBox VM, merging everything
into the testScript and machine expressions.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Currently it pretty much tests starting up virtual machines and just
shutting down afterwards, but for both VBoxManage and the VirtualBox
GUI.
This helps catching errors in hardened mode, however we still need to
test whether networking works the way intended (and I fear that this is
broken at the moment).
The VirtualBox VM is _not_ using hardware virtualization support (thus
we use system = "i686-linux", because x86_64 has no emulation support),
because we're already within a qemu VM, which means it's going to be
slow as hell (that's why I've written own subs just for testing
startup/shutdown/whatnot with respective timeouts).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This patch should be reverted if either:
- systemd fixes the multi-swapon issue.
https://bugs.freedesktop.org/show_bug.cgi?id=86930
- If we disable the autogeneration of swap and vfat units within
systemd.
Following the discussion NixOS#5021:
- obsolete the nix.proxy option
- add the networking.proxy option
- open a default no_proxy environment variable
- add a rsync option
- Manual tests ok.
- Automatic tests ok.
Amended by lethalman to simplify the option descriptions.
Of course, this could be done via packageOverrides, but this is more
explicit and makes it possible to run the tests with various Chromium
overrides.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Currently, the test is only for testing the user namespace sandbox and
even that isn't very representative, because we're running the tests as
root.
But apart from that, we should have functionality for opening/closing
windows and the main goal here is to get them as deterministic as
possible, because Chromium usually isn't very nice to chained xdotool
keystrokes.
And of course, the most important "test" we have here: We know at least
whether Chromium works _at_all_.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Once nixpart 1.0 is released we then only need to delete one single
directory rather than searching for needles in a haystack, that is, all
of <nixpkgs>. Also, it keeps my sanity at an almost healthy level.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Quite a mess but at least the mdraid tests succeed now. However, the
lvm2 tests are still failing, so we need to bring back a few more old
crap :-(
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I'm really not sure whether these tests are actually run upstream,
because there are quite a few oddities which either are my fault by just
missing something important or upstream really doesn't bother to run
those tests.
One example of this are testDiskChunk1 and testDiskChunk2, which create
two non-existing partitions and tries to allocate them. Now, in
allocatePartitions(), the partedPartition attributes are reset to None
and shortly afterwards a for loop is expecting it to be NOT None.
So, for now I'm disabling these tests and will see if we stumble on them
during work on nixpart 1.0, so we're really sure whether it's my fault
or a real bug in blivet.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Put a copy of old version 0.17 expression into 0.17.nix and update the
pointers from nixpart0 accordingly.
This also means, that plain nixpart is now way more broken than
nixpart0 (we might want to temporarily fix 0.4 anyway).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This tells the sad tale of @the-kenny who had bind-mounted his home
directory into a container. After doing `nixos-container destroy` he
discovered that his home directory went from "full of precious data" to
"no more data".
We want to avoid having similar sad tales in the future, so this now also
check this in the containers VM test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Currently only tests basic resource record lookup against IPv4 and IPv6.
Nothing special yet, but probably enough for most setups.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit 469f22d717, reversing
changes made to 0078bc5d8f.
Conflicts:
nixos/modules/installer/tools/nixos-generate-config.pl
nixos/modules/system/boot/loader/grub/install-grub.pl
nixos/release.nix
nixos/tests/installer.nix
I tried to keep apparently-safe code in conflicts.
This randomly fails with "Destination Host Unreachable". That
shouldn't happen, since all interfaces/routes should be up after
"nixos-container start" returns. Need more investigation...
So far the test only uses an authorized key that is copied over to the
target machine instead of being set by the target's configuration.
Now, we cover both cases.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Attempt to fix race condition in installer tests, especially the
grub1 test.
The latter was failing when running "parted /dev/sda ..." because
/dev/sda didn't exist yet.
The installer now asks the user to set a root password if stdin is a
tty, which doesn't work for an interactive test.
http://hydra.nixos.org/build/11130072
Hopefully fixes failures like:
http://hydra.nixos.org/build/10712833
This shouldn't be necessary, but it might be that the use of unionfs
is interfering with a clean shutdown.
This allows specifying rules for systemd-tmpfiles.
Also, enable systemd-tmpfiles-clean.timer so that stuff is cleaned up
automatically 15 minutes after boot and every day, *if* you have the
appropriate cleanup rules (which we don't have by default).
You can now run a test in the nixos/tests directory directly using
nix-build, e.g.
$ nix-build '<nixos/tests/login.nix>' -A test
This gets rid of having to add the test to nixos/tests/default.nix.
(Of course, you still need to add it to nixos/release.nix if you want
Hydra to run the test.)
Uses standard NixOS user config merging.
Work in progress: The slave config does not actually start the slave agent. This just configures a
jenkins user if required. Bare minimum to enable a nice jenkins SSH slave.
By default the jenkins server is executed under the user "jenkins". Which can be configured using
users.jenkins.* options. If a different user is requested by changing services.jenkins.user then
none of the users.jenkins options apply.
This patch does not include jenkins slave configuration. Some config options will probably change
when this is implemented.
Aspects like the user and environment are typically identical between slave and master. The service
configs are different. The design is for users.jenkins to cover the shared aspects while
services.jenkins and services.jenkins-slave cover the master and slave specific aspects,
respectively.
Another option would be to place everything under services.jenkins and have a config that selects
master vs slave.
Now that overriding fileSystems in qemu-vm.nix works again, it's
important that the VM tests that add additional file systems use the
same override priority. Instead of using the same magic constant
everywhere, they can now use mkVMOverride.
http://hydra.nixos.org/build/6695561
Those tests are flapping and redundant to some degree, as two
configurations are tested in NixOps as well. So, let's deactivate them
until the 1.0 release of nixpart, which has a more general approach for
automatically partitioning NixOS installations.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It requires a writable /nix/store to store the build result. Also,
wait until we've reached multi-user.target before doing the build, and
do a sync at the end to ensure all data to $out is properly written.
http://hydra.nixos.org/build/6496716
