this because 'ld' wants to know the path of every library involved in a dynamic
linking. I imagine that ld does not need that in native builds because it can
call the loader for it to resolve the library rpaths, but this is not the case
for cross-building.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18577
inputs did not get in)
Updating the xorg builder script to support cross building (in fact, support
for propagating the required build inputs).
svn path=/nixpkgs/branches/stdenv-updates/; revision=18569
- Disabling guile test, because one fails. I commented on that in the source.
On cross builds:
- Adding stripping
- Updating the glibc-2.11 expression to match the parameters of glibc-2.9,
which I was updating more.
- Renaming from selfNativeBuildInput to selfBuildNativeInput, so this matches
better the pattern buildNativeInputs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18550
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
on a derivation with a meta.license attribute which does not satisfy the
license predicate.
With this adapter you can abort any install which depends on software
which are not free by default. You can try it with MPlayer, because
MPlayer depends of win32codecs flagged as "unfree".
svn path=/nixpkgs/trunk/; revision=18530
its dependencies. To make it works, you need to change the default
stdenv as documented in the error message.
./maintainers/scripts/dep-licenses.sh <attribute name>
svn path=/nixpkgs/trunk/; revision=18508
statement of the gcc-wrapper coreutils dependency on r17867.
I don't have i686-darwin to try this.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18490
true/false, which tells whether the derivation needs itself as
buildNativeInput.
For example, in order to build cross ncurses, we need the a native build
ncurses.
(As libtool does not work in stdenv, I have not tested this change, to check
whether finally ncurses cross-build)
svn path=/nixpkgs/branches/stdenv-updates/; revision=18489
derivation, the "buildInputs" in every stdenv mkDerivation don't map now
directly to the environment
variable "buildInputs" in the builder, but "buildNativeInputs". So, the inputs
build by the native compiler.
When cross compiling, they will map to the environment variable "buildInputs"
(yes, now the same name), which means does to be built with the cross compiler.
I think I improved the naming of variables a bit. There was a big mess,
specially in the stdenv adapter for cross building, and also in the default
builder script.
I also tried to add proper manager of propagatedInputBuilds, these being
propagated considering the host or build origin of that input build (so, at the
end, being those propagatedInputBuilds being propagated properly to the native
or the cross compiler.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18477
the cross compilation functionality.
- I renamed some expected stdenv.mkDerivation parameter attributes so we can
keep this branch properly updated from trunk. We agreed with Nicolas Pierron
doing a massive renaming, so all current buildInputs become hostInputs (input
as build for the host machine, in autotools terminology) , and
then buildInputs would mean "input as for the build machine".
By now, the specific "input as for the build machine" is specified through
buildNativeInputs. We should fix this in the merge to trunk.
- I made the generic stdenv understand the buildNativeInputs, otherwise if
we start changing nixpkgs expressions so they distinguish the current
buildInputs into buildInputs and buildNativeInputs, we could break even more
nixpkgs for other platforms.
- I changed the default result of mkDerivation so it becomes the derivation for
to be run in the build machine. This allows, without any special rewriting,
"fetchurl" derivations to be always results for the build machine to use
them.
- The change above implies that, for anyone wanting to cross-compile, has to
build the hostDrv of the wanted derivation. For example, after this commit,
the usual test of "nix-build -A bison.hostDrv arm.nix" works. I described
the contents of this arm.nix in r18398.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18471
I made the stdenvCross adapter simpler, according to Nicolas Pierron comments,
and I commented it a bit.
There are still jobs to do. At least:
- Plan for the general renaming from buildInputs to hostInputs
- We should not break merges from trunk.
- Make the generic stdenv understand about host/buildInputs, at least for
native builds, because it is used in the always-native building of
stdenvLinux. This should allow us to remove all duplications of "*NoCross" in
nixpkgs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18449
needing to keep a new tree of expressions apart for the expressions to get
cross-compiled.
I changed the whole way of using cross compilation with nixpkgs, which before
was done through a simple adapter.
Now the adapter became complex, and I've tried to avoid the most obvious
recursivities. For example, the fetchurl expression should
never be cross-compiled, as the gmp, mpfr, and some others, like
some ncurses, perl, ... I made overrided copies of those necessary as
perlNoCross, ncursesNoCross, as stdenvNoCross, keeping in mind that
the stdenv (capable of cross compilation) is built upon stdenvNoCross using
an adapter.
So, to cross compile, instead of building using "nixpkgs/default.nix",
you should build with your
own "myarchiteture.nix", which should have contents like these, for example:
import /etc/nixos/nixpkgs/default.nix
{
crossSystem = {
config = "armv5tel-unknown-linux-gnueabi";
bigEndian = false;
arch = "arm";
float = "soft";
};
}
svn path=/nixpkgs/branches/stdenv-updates/; revision=18398
It still does not work, but I think I already get glibc cross compiled.
Next: gcc and g++, and set some setup script hooks on stdenvCross.
It took quite enough hours for this commit.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18351
My idea is to provide special stdenv expressions that will contain in the path
additional cross compilers. As most expressions for programs accept a stdenv parameter,
we could substitute this parameter with the special stdenv, which will have a
generic builder that attempts the usual "--target=..." and can additionally
have an env variable like "cross" with the target architecture set.
So, finally we could have additional expressions like this:
bashRealArm = makeOverridable (import ../shells/bash) {
inherit fetchurl bison;
stdenv = stdenvCross "armv5tel-unknown-linux-gnueabi";
};
Meanwhile it does not work - I still cannot get the cross-gcc to build.
I think it does not fill the previous expressions with a lot of noise, so I
think it may be a good path to follow.
I only touched some files of the current stdenv: gcc-4.3, kernel headers
2.6.28, glibc 2.9, ...
I tried to use the gcc-cross-wrapper, that may be very outdated. Maybe I will
update it, or update the gcc-wrapper expression to make it fit the cross tools,
but meanwhile I even cannot build gcc, so I have not tested the wrapper.
This new idea on cross compiling is not similar to that of the
nixpkgs/branches/cross-compilation, which mostly added bare new expressions for
anything to be cross compiled, if I understood it correctly.
I cared not to break anything of the usual stdenv in all this work.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18343
This comes from:
svn diff ^/nixpkgs/trunk/@18255 ^/nixpkgs/branches/stdenv-updates/ > diff
patch -p0 < diff
and then adding into svn all files new from the patch.
trunk@18255 comes from the last time I updated stdenv-updates from trunk.
svn path=/nixpkgs/stdenv-updates2/; revision=18272
tree under $out into a separate stdenv adapter named keepBuildTree.
* makeModulesClosure: support building an initrd for a kernel that has
been compiled with coverage instrumentation.
svn path=/nixpkgs/trunk/; revision=16916
I thought I didn't change stdenv, but I did. This will go soon into the stdenv
branch then.
Reverse-merging r16467 through r16465.
svn path=/nixpkgs/trunk/; revision=16468
LD_LIBRARY_PATH since it breaks /bin/sh on non-NixOS platforms (and
reverted the previous "fix" in r15470).
svn path=/nixpkgs/branches/stdenv-updates/; revision=16029
* Use patchelf 0.5 and use the --force-rpath flag. This removes the
need for setting LD_LIBRARY_PATH and so should fix bootstrapping
Nixpkgs on non-NixOS platforms.
svn path=/nixpkgs/trunk/; revision=16022
export > $NIX_BUILD_TOP/env-vars
will fail if the name attribute contains a metacharacter
(e.g. "?"):
building path(s) `/nix/store/yk93gk3lc5bslcn5hklnzs0bdkp2r0an-icu-3.8-setBreakType-public.diff?rev=1.1'
/nix/store/gj8ac12mrwinbq7wzzhwfjjs3028a11x-stdenv-linux/setup: line 374: $NIX_BUILD_TOP/env-vars: ambiguous redirect
I guess this only happens if you happen to have an old temporary
build directory for the same derivation in /tmp.
This affects fetchurl in particular.
svn path=/nixpkgs/trunk/; revision=15915
* setup.sh: removed some obsolete features, specifically some that
were only used by the old build farm.
* addToSearchPath: removed some parameters that weren't used
anywhere.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15136
instead of "gcc-4.3.3". This fixed the long-standing annoyance that
you can't distinguish the two in (say) nix-store -qR.
* On x86_64-linux, put $out/lib64 in the RPATH in addition to
$out/lib, because some packages (in particular GCC) put libraries in
$out/lib64 and ended up linking against the wrong library.
* Strip $out/lib64.
* Removed g77_42 because it's exactly the same as gfortran.
svn path=/nixpkgs/branches/stdenv-updates/; revision=14708
* Updated stdenv-linux:
- The bootstrap tools are no longer statically linked (except for
binaries in the Nixpkgs tree used to download and unpack the
bootstrap tools).
- x86_64 uses the same static binaries as i686. This makes the
Nixpkgs tree a bit smaller.
- Use the Linux 2.6.28 headers.
svn path=/nixpkgs/branches/stdenv-updates/; revision=13946
variables. This is so you don't have to write things like
preBuild=preBuild
preBuild() {
bla
}
svn path=/nixpkgs/branches/stdenv-updates/; revision=13941
setting the NIX_INDENT_MAKE variable; disabled by default) so we
don't need a separate gnumakeNix package.
svn path=/nixpkgs/branches/stdenv-updates/; revision=13807
Instead of using a mishmash of statically linked and dietlibc
programs (which often have problems on various platforms), we just
use normal, dynamically linked binaries, and use some patchelf magic
to rewrite them so that they can find Glibc. Also include G++ and
Perl, since there are some builds in the bootstrap that need them.
svn path=/nixpkgs/branches/stdenv-updates/; revision=13788
* In stripDirs: use xargs -r, otherwise when there is nothing to
strip, strip prints its help text. Harmless but annoying.
svn path=/nixpkgs/trunk/; revision=13492
bootstrap wasn't recycled in the final allPackages, causing an
additional glibc to be built for packages that explicitly depend on
glibc.
svn path=/nixpkgs/trunk/; revision=12200
paths. E.g. /usr/bin/perl is rewritten to /nix/store/<whatever Perl
is in $PATH>. Paths in the Nix store are left unchanged.
Contributed by Nicolas Pierron.
svn path=/nixpkgs/branches/stdenv-updates/; revision=12036
* Some fetchurl-related refactoring. The `realCurl' attribute is
gone, `curl' is the real thing. To prevent an infinite recursion in
`fetchurl' (because it depends on curl and building curl needs
fetchurl), curl and its dependencies (openssl, zlib, perl) use
`fetchurlBoot', which is the fetchurl used by the previous bootstrap
phase (e.g. the statically linked version of curl for
stdenv-linux). So as a result you can use https:// urls almost
everywhere.
There's also some hackery to prevent a different curl from being
built in every stdenv-linux bootstrap phase (namely the
stdenv.fetchurl attribute which allows fetchurl to be overriden
everywhere).
svn path=/nixpkgs/trunk/; revision=11905
the fail() function unnecessary.
* Flag showBuildStats to print execution times on builder exit.
svn path=/nixpkgs/branches/stdenv-updates/; revision=11688
* Updated the kernel headers.
* ghc: setup hooks are now generated using substituteAll.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10838
stack traces impossible.
* When stripping all symbols on Darwin, don't use the "-s" flag
since it has a completely different meaning (it takes an argument
specifying a file containing a list of symbols).
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10809
merge cleanly right away (kde-4, kernel stuff) so it should be
merged later. But the stdenv stuff is all there.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10793
in genericBuild. This also means that you can override a phase
function by redefining it, like
buildPhase() {
... do something ...
}
and you still get the log nesting stuff.
* GNUmakefile is also a valid makefile name.
* Evaluate the variables $preHook and $postHook to allow more stdenv
overrideability.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10786
is skipped when there is no configure script). So you don't need to
set
buildPhase = "true";
for derivations that don't have any build action.
* Variable $makefile to allow the makefile to be specified.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10784
* GCC 4.2: restore the ability to build a statically linked compiler,
needed for the Nixpkgs bootstrap.
* GCC 4.2: use symlinks instead of hard links in $out/bin
(NIXPKGS-62).
svn path=/nixpkgs/branches/stdenv-updates/; revision=9771
The function for use in setup hooks. The syntax is very simple:
add_to_var varName needDir addDir prefix
If the directory $prefix$needDir exists, directory $prefix$addDir is added to
variable named varName (using PATH_DELIMITER as delimiter). If addDir is "", it
defaults to needDir (this is a most common case).
svn path=/nixpkgs/trunk/; revision=9496
Now you can write prefixKey="-prefix " and "-prefix ${out}" will be inserted in
configureFlags (instead of "--prefix ${out}").
svn path=/nixpkgs/trunk/; revision=9351
URLs to http://nix.cs.uu.nl/dist/tarballs. With content-addressable
mirror support (r9190, NIXPKGS-70) this is no longer necessary:
fetchurl will try to download from that location automatically. So
we can keep the original URLs.
svn path=/nixpkgs/trunk/; revision=9192
* Removed substitute, it's part of the generic builder now.
* stdenv-initial (Linux): use the real generic builder script. This
does require that sed is in the path of the builder of the initial
stdenv.
svn path=/nixpkgs/trunk/; revision=7498
fixupPhase strips binaries, runs patchelf, etc. This is so that
those things still happen when somebody overrides installPhase.
svn path=/nixpkgs/trunk/; revision=7494
often the same flags need to be passed to both `make' and `make
install'. Added a variable buildFlags for flags that should only be
passed to `make'.
svn path=/nixpkgs/trunk/; revision=7491
* If the environment variable buildCommand is set, then eval that
instead of doing the build phases. This is used by the runCommand
function in all-packages.nix to allow one-lines like
foo = runCommand "foo" {} "mkdir $out; echo foo > $out/foo";
svn path=/nixpkgs/trunk/; revision=7298
* Kernel: accept a list of kernel patches through the kernelPatches
argument. The names of the patches are added to the description
attribute (e.g., "The Linux kernel (with patches:
skas-2.6.18-v9-pre9)").
* Generic builder (forked in setup-new.sh): support patches that are
compressed using gzip or bzip2.
svn path=/nixpkgs/trunk/; revision=6913
* To prevent this kind of thing, check that all tools are statically
linked.
* Use findutils 4.2.27, 4.2.28 doesn't build with dietlibc.
svn path=/nixpkgs/trunk/; revision=6881
This has a major advantage: you can write hooks directly in Nix
expressions. For instance, rather than write a builder like this:
source $stdenv/setup
postInstall=postInstall
postInstall() {
ln -sf gzip $out/bin/gunzip
ln -sf gzip $out/bin/zcat
}
genericBuild
(the gzip builder), you can just add this attribute to the
derivation:
postInstall = "ln -sf gzip $out/bin/gunzip; ln -sf gzip $out/bin/zcat";
and so a separate build script becomes unnecessary. This should
allow us to get rid of most builders in Nixpkgs.
* Allow configure and make arguments to contain whitespace.
Previously, you could say, for instance
configureFlags="CFLAGS=-O0"
but not
configureFlags="CFLAGS=-O0 -g"
since the `-g' would be interpreted as a separate argument to
configure. Now you can say
configureFlagsArray=("CFLAGS=-O0 -g")
or similarly
configureFlagsArray=("CFLAGS=-O0 -g" "LDFLAGS=-L/foo -L/bar")
which does the right thing. Idem for makeFlags, installFlags,
checkFlags and distFlags.
Unfortunately you can't pass arrays to Bash through the environment,
so you can't put the array above in a Nix expression, e.g.,
configureFlagsArray = ["CFLAGS=-O0 -g"];
since it would just be flattened to a since string. However, you
can use the inline hooks described above:
preConfigure = "configureFlagsArray=(\"CFLAGS=-O0 -g\")";
svn path=/nixpkgs/trunk/; revision=6863
Glibc. This is useful when building GCC.
* gcc-wrapper: the dynamic linker has a different name on x86_64 and
powerpc.
* gcc-wrapper: "glibc" -> "libc", because someday we might support
different C libraries.
* gcc: don't do a multilib build (e.g., 32-bit support on x86_64),
don't need it.
* gcc: merge in support for static builds.
* gcc: various simplifications in the compiler/linker flags, hope they
work.
svn path=/nixpkgs/trunk/; revision=6823
impure x86_64 environment, make sure that the 32-bit GCC / Glibc
libraries are installed, such as /usr/lib/crti.o.)
svn path=/nixpkgs/trunk/; revision=6818
x86_64. Glibc doens't build yet, though (it needs libgcc_eh, which
is strangely missing from the static GCC build).
svn path=/nixpkgs/trunk/; revision=6815
* The statically linked bootstrap tools are now automatically
reproducable, just do:
$ nix-build ./make-bootstrap-tools.nix
The resulting binaries in result/in-nixpkgs go to
stdenv/linux/bootstrap/<platform>/, and the tarballs in
result/on-server go to
https://svn.cs.uu.nl:12443/repos/trace/tarballs/trunk/stdenv-linux/<platform>/<revision>/.
These are checked out on nix.cs.uu.nl under http://.../dist/tarballs.
* The statically linked libraries all use dietlibc now (except
patchelf and glibc), so they are much smaller. This is especially
nice for the tools in the Nixpkgs tree, since it makes Nixpkgs
tarballs smaller.
* Use Binutils 2.17 and GCC 4.1.1 for the bootstrap.
* The stdenv is now based on Glibc 2.5. I hope it works ;-)
svn path=/nixpkgs/trunk/; revision=6803
set to the result, but don't use them in the actual derivation (so
they're not inputs). Useful to pass through extra attributes that
are not inputs, but should be made available to Nix expressions
using the derivation (e.g., in assertions).
svn path=/nixpkgs/trunk/; revision=6521
A stdenv/mingw/pkgs/pkgconfig-builder.sh
Bootstrap pkg-config: support the setup hook.
M stdenv/mingw/fix-builder.sh
Fix the "system" variable.
svn path=/nixpkgs/trunk/; revision=6267
Moved all the shell fixes to fix-builder.sh, which is now always invoked.
Added aterm to the list of packages provided by mingw.nix
svn path=/nixpkgs/trunk/; revision=6152
- clone of fetchurl that invokes a given chmod to workaround problems
with inappropriate file permissions (executable files are not allowed
by Nix)
- cygpath tool to determine the full windows path of a cygwin
tool. This tool is used to give fetchurl the windows path to chmod.
- native curl.exe
- gcc-wrapper no longer used
- all-packages.nix: allows stdenv to specify fetchurl.
svn path=/nixpkgs/trunk/; revision=6140
function to regenerate itself with a different setup script. This
is useful for experimenting with changes to the setup script in
specific packages without triggering a rebuild of everything.
* stdenv/generic/setup-latest.sh is a branch of setup.sh containing
pending changes that will be merged into setup.sh eventually.
* setup-latest.sh: don't use tar's "z" and "j" flags. Rather, call
gzip and bunzip2 directly.
svn path=/nixpkgs/trunk/; revision=6066
(ideally, this should be the other way around, but I have no idea how
many packages will break if we enable shared libraries by default)
svn path=/nixpkgs/trunk/; revision=5923
contains arbitrary information about a package, like this:
meta = {
homepage = "http://gcc.gnu.org/";
license = "GPL/LGPL";
description = "GNU Compiler Collection, 4.0.x";
};
The "meta" attribute is not passed to the actual derivation
operation, so it's not a dependency --- changes to "meta" attributes
don't trigger a recompilation.
Now we have to standardise some useful attributes ;-)
svn path=/nixpkgs/branches/usability/; revision=5024
all-packages. That is, an attribute like "bash" in all-packages.nix
should evaluate to the "bash" used to build stdenv, it shouldn't
build a new one.
Hm, this would be a lot cleaner if we had lazy_rec ;-)
svn path=/nixpkgs/branches/usability/; revision=4775
Now, switching the curl to this version did not trigger a massive rebuild on
my system, which puzzles me. Maybe it is because no checksum is recorded?
Am I doing something wrong?
svn path=/nixpkgs/trunk/; revision=4434
* Use the system Perl on all non-i686-linux platforms.
* Don't build Python support in libxml2 on most platforms.
svn path=/nixpkgs/trunk/; revision=3019
$glibc/lib/gconv/ISO-2022-JP.so has an RPATH of `$ORIGIN' so that it
can find glibc/lib/gconv/libJIS.so; `$ORIGIN' should not be filtered
out of the RPATH).
svn path=/nixpkgs/trunk/; revision=2290
* Combine most of the archives together into one file (static.bz2).
* Don't depend on Subversion directories, but single files only.
Otherwise any Subversion operation may cause a rebuild because
something in .svn changes. It would be nice if .svn directories
were filtered out when copying things to the store.
* Glibc tarball: removed all .so files, /bin and /sbin, etc., and put
linux-headers in the Glibc tarball.
svn path=/nixpkgs/trunk/; revision=2265
this contains mostly Armijn's pure stdenv-linux.
* After unpacking the statically linked GCC, patch all store paths to
/nix/store/ffffffffffffffffffffffffffffffff. Ugly hack to prevent
undeclared references but it works.
* We don't need Glib's dynamic libraries in the first bootstrap stage;
delete them. Actually the downloaded Glibc binary is only needed
for building Glibc, since GCC needs a C compiler to build some
programs in `configure'. So static linking is fine for that. Maybe
it would be better to patch `configure' so that we don't need a
pre-built Glibc at all.
* Set the svn:executable property on `cp' and `patchelf'.
* In Glibc, revert to LinuxThreads. Maybe NPTL will work, but TLS
support is a problem.
* Delete most Glibc patches; they're no longer needed since the branch
updated it to 20050110.
* Some cleanups.
svn path=/nixpkgs/trunk/; revision=2258
be passed to derivations that need to apply patches.
* GCC 3.4 is now the default compiler (old GCC renamed to `gcc-3.3').
* The temporary GCCs built during the stdenvLinux bootstrap are now
built without C++ support and without profiling.
* Remove fixincl in GCC 3.4 to prevent a retained dependency on the
previous GCC.
* Always set $prefix in setup.sh, even when there is no configure
script.
svn path=/nixpkgs/trunk/; revision=1444
Use with a bit of care though, because it will need an extra flag to be able to find the right version of cc1, etc.
svn path=/nixpkgs/trunk/; revision=1374
`$NIX_BUILD_TOP/env-vars' at the beginning of each build phase. In
conjunction with the `-K' Nix flag, this is useful for debugging: to
reproduce the build environment, go to the saved build directory and
source in `env-vars' (e.g., `. env-vars').
svn path=/nixpkgs/trunk/; revision=1367
substitution feature (which appears to be buggy - there's no way to
wait for an output redirection, and bash sometimes appears to die
due to subtle timing conditions). This also removes the most
egregious dependency on bash.
svn path=/nixpkgs/trunk/; revision=1258
even if some build phase failed if the variable `$succeedOnFailure'
is set to 1. If that happens, the file `$out/nix-support/failed' is
created to mark the build result as bad. This is useful for release
management systems that might want to publish failed releases.
svn path=/nixpkgs/trunk/; revision=1163
* A new `distPhase' to build source distributions (enabled when
$doDist = 1).
* A new `checkPhase' to perform `make check' (enabled when $doCheck =
1).
* Allow the prefix to be redirected, either by setting $prefix or by
setting $useTempPrefix to 1. Useful when making distributions.
* Allow the build or install phases to be skipped by setting
$dontBuild $dontInstall to 1.
* Allow the order of phases to be changed by setting $phases.
svn path=/nixpkgs/trunk/; revision=1151
("/usr/bin/ld: can't use -s with -r (resulting file would not be
relocatable)").
* Since stdenv/generic had to be modified for this, I forked it in
situ. This should be merged later.
svn path=/nixpkgs/trunk/; revision=1121
On the downside, the build process of stdenvLinux builds gcc 9 times
(3 x 3 bootstrap stages). That's a bit excessive.
svn path=/nixpkgs/trunk/; revision=880
* Make builders unexecutable by removing the hash-bang line and
execute permission.
* Convert calls to `derivation' to `mkDerivation'.
* Remove `system' and `stdenv' attributes from calls to
`mkDerivation'. These transformations were all done automatically,
so it is quite possible I broke stuff.
* Put the `mkDerivation' function in stdenv/generic.
svn path=/nixpkgs/trunk/; revision=874
store, rather than outside (such as /bin/sh).
For instance, the Nix expression for the ATerm library now looks
like this:
{stdenv, fetchurl}:
stdenv.mkDerivation {
name = "aterm-2.0.5";
builder = ./builder.sh;
...
}
where `mkDerivation' is a helper function in `stdenv' that massages
the given attribute set into using the bash shell that is part of
the standard environment:
mkDerivation = attrs: derivation (att s // {
builder = pkgs.bash ~ /bin/sh;
args = ["-e" attrs.builder];
stdenv = (...);
system = (...).system;
});
Note that this makes it unnecessary to set the `stdenv' and `system'
attributes, since `mkDerivation' already does that.
svn path=/nixpkgs/trunk/; revision=866
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
checked whether absolute paths passed to gcc/ld refer to the store,
which is wrong: they can also refer to the build tree
(/tmp/nix-...).
* Less static composition in the construction of stdenv-nix-linux:
gcc-wrapper and generic are now passed in as arguments, rather then
referenced by relative path. This makes it easier to hack on a
specific stage of the bootstrap process (before, a change to, e.g.,
generic/setup.sh would cause all bootstrap stages to be redone).
svn path=/nixpkgs/trunk/; revision=833
- gcc/ld-wrappers have been factored out into a separate
derivation. This allows a working gcc to be installed in the user
environment. (Previously the Nix gcc didn't work because it
needed a whole bunch of flags to point to glibc.)
- Better modularity: packages can specify hooks into the setup
scripts. For instance, setup no longer knows about the
PKG_CONFIG_PATH variable; pkgconfig can set it up instead.
- gcc not longer depends on binutils. This simplifies the bootstrap
process.
svn path=/nixpkgs/trunk/; revision=816
/usr/lib/crt1.o, while it should be using $glibc/lib/crt1.o. This
quick hack (prepending $glibc/lib to the GCC search path using "-B")
fixes the problem, but a better solution to prevent this sort of
thing is to remove these static paths from gcc.
Note: this problem was found using the pure UML Nix environment
(where we don't have /usr/lib).
svn path=/nixpkgs/trunk/; revision=810
against the right dynamic libraries. set-env.sh add the right linker flags to the
NIX_LDFLAGS environment variable, which is passed by gcc-wrapper to the linker.
(In many cases these flags could just be passed through LDFLAGS to configure
scripts; however, in many other cases this doesn't work properly.)
--This line, and those below, will be ignored--
M pkgs/atk/atk-build.sh
M pkgs/glibc/glibc-build.sh
M pkgs/expat/expat-build.sh
M pkgs/freetype/freetype-build.sh
M pkgs/system/populate-linkdirs.pl
M pkgs/sdf2/sdf2-build.sh
M pkgs/pspell/pspell-build.sh
M pkgs/subversion/subversion-build.sh
M pkgs/helpers/set-env.sh
M pkgs/pango/pango-build.sh
M pkgs/strategoxt/strategoxt-build.sh
M pkgs/aterm/aterm-build.sh
M pkgs/libxml2/libxml2-build.sh
M pkgs/glib-1/glib-build.sh
M pkgs/glib/glib-build.sh
M pkgs/pan/pan.fix
M pkgs/pan/pan-build.sh
M pkgs/libxslt/libxslt-build.sh
M pkgs/httpd/httpd-build.sh
M pkgs/openssl/openssl-build.sh
M pkgs/gtkspell/gtkspell-build.sh
M pkgs/fontconfig/fontconfig.fix
M pkgs/fontconfig/fontconfig-build.sh
M pkgs/gnet/gnet-build.sh
M pkgs/gtk+-1/gtk+-build.sh
M pkgs/gtk+/gtk+-build.sh
M pkgs/stdenv/gcc-wrapper.sh
M pkgs/stdenv/stdenv-build.sh
M pkgs/db4/db4-build.sh
M pkgs/db4/db4.fix
M pkgs/MPlayer/MPlayer-build.sh
M pkgs/swig/swig-build.sh
svn path=/nixpkgs/trunk/; revision=213
the build and execution environment.
This is very useful. For example, it allows packages built on a SuSE
8.2 system to run on a SuSE 8.1 system (this is because 8.2 has a newer
glibc; packages built against it cannot be dynamically linked against
older glibcs).
Of course, Fix packages should not directly import glibc since that is
very system-specific. Rather, they should import stdenv/stdenv.fix and
in their build scripts source in $stdenv/setup, which will setup the
right environment variables. The idea is that stdenv.fix provides the
basic C/Unix build environment (C compiler, POSIX utilities, etc.).
Note that only the ATerm package currently uses this.
svn path=/nixpkgs/trunk/; revision=203
