As far as I can tell, this has never actually done anything, as
LDEMULATION is not exported. I tried exporting it and builds broke,
and as it doesn't seem to have caused any problems as a noop all these
years it didn't seem worth investigating further.
So far we've ignored response files in arguments, and did not
check linkType against expanded parameters. This means if
we have `-static` in a @reponse-file, linkType will not be
set to `-static` as we never check against the expanded arguments
from response files.
fixes e.g.:
pkgsMusl.libfsm
pkgsMusl.libiscsi
pkgsMusl.nsjail
pkgsMusl.pv
match strings have whitespace on either side, which wasn't
matching leading/trailing arguments previously
`--enable-deterministic-archives` is a GNU specific strip flag and
causes other strip implementations (for example LLVM's, see #138013)
to fail. Since strip failures are ignored, this means that stripping
doesn't work at all in certain situation (causing unnecessary
dependencies etc.).
To fix this, no longer pass `--enable-deterministic-archives`
unconditionally, but instead add it in a GNU binutils specific strip
wrapper only.
`commonStripFlags` was only used for this flag, so we can remove
it altogether.
Future work could be to make a generic strip wrapper, with support for
nix-support/strip-flags-{before,after} and NIX_STRIP_FLAGS_{BEFORE,AFTER}.
This possibly overkill and unnecessary though -- also with the
additional challenge of incorporating the darwin strip wrapper somehow.
At least for now. Such changes are risky (we have very many packages),
and apparently it needs more testing/review without blocking other
changes.
This reverts the whole range 4d0e3984918^..8752c327377,
except for one commit that got reverted in 6f239d7309 already.
(that MR didn't even get its merge commit)
* bintools: disable -pie when -r or -Ur are used
ld’s -r allows you to partially link object files. When -pie is passed with -r, though, we get:
ld: -r and -pie may not be used together
Most build systems are intelligent enough to pass -no-pie before -r, but we might as well support those that
don’t.
Note: -pie is not enabled by default in Nixpkgs, but it is when you are using musl. So this solution is really
only useful for musl toolchains.
* bintools-wrapper: Add incremental -i check for pie
In a typical build environment the toolchain will use the value of the
MACOSX_DEPLOYMENT_TARGET environment variable to determine the version
of macOS to support. When cross compiling there are two distinct
toolchains, but they will look at this single environment variable. To
avoid contamination, we always set the equivalent command line flag
which effectively disables the toolchain's internal handling.
Prior to this change, the MACOSX_DEPLOYMENT_TARGET variable was
ignored, and the toolchains always used the Nix platform
definition (`darwinMinVersion`) unless overridden with command line
arguments.
This change restores support for MACOSX_DEPLOYMENT_TARGET, and adds
nix-specific MACOSX_DEPLOYMENT_TARGET_FOR_BUILD and
MACOSX_DEPLOYMENT_TARGET_FOR_TARGET for cross compilation.
Instead of always supplying flags, apply the flags as defaults. Use
clang's native flags instead of lifting the linker flags from binutils
with `-Wl,`.
If a project is using clang to drive linking, make clang do the right
thing with MACOSX_DEPLOYMENT_TARGET. This can be overridden by command
line arguments. This will cause modern clang to pass
`-platform_version 10.12 0.0.0`, since it doesn't know about the SDK
settings. Older versions of clang will pass down `-macos_version_min`
flags with no sdk version.
At the linker layer, apply a default value for anything left
ambiguous. If nothing is specified, pass a full
`-platform_version`. If only `-macos_version_min` is specified, then
lock down the sdk_version explicitly with `-sdk_version`. If a min
version and sdk version is passed, do nothing.
The `platform` field is pointless nesting: it's just stuff that happens
to be defined together, and that should be an implementation detail.
This instead makes `linux-kernel` and `gcc` top level fields in platform
configs. They join `rustc` there [all are optional], which was put there
and not in `platform` in anticipation of a change like this.
`linux-kernel.arch` in particular also becomes `linuxArch`, to match the
other `*Arch`es.
The next step after is this to combine the *specific* machines from
`lib.systems.platforms` with `lib.systems.examples`, keeping just the
"multiplatform" ones for defaulting.
The new skip for the dynamic linker introduced in
ccfd26ef14 ("bintools-wrapper: skip dynamic linker for static
binaries") includes a change in behaviour, previously the $link32
variable was checked using an arithmetic expression via (( )). This
returns zero if the output of the arithmetic expression is nonzero, i.e.
link32=1 would return zero and the if condition would be executed.
The code refactored this to use "$link32" = "0" which is incorrect in
this case, since we want this if conditional to run if $link32 is 1.
Small shell excerpt for clarity:
$ export link32=1
$ export cookie=1
$ if [[ "$cookie" = "1" ]] && (( "$link32" )); then echo "do some stuff"; fi;
do some stuff
$ if [[ "$cookie" = "1" && "$link32" = "0" ]]; then echo "do some stuff"; fi;
$
Change it to check for $link32 = "1", as the previous code did.
Currently we set dynamic-linker unconditionally. This breaks
however some static binaries i.e. rust binaries linked against musl.
There is no reason we should set an elf interpreter for static binaries
hence this is skipped if `-static` or `-static-pie` is either passed to
our cc or ld wrapper.
The dynamic loader on powerpc64 is called ld64.so.2 rather than
ld-linux.so.*, and was not matched by the existing pattern.
We reuse the dynamicLinker name from binutils to match a wider set
of platforms and to avoid specifying this information in two places.
Revert the hack and the original faulty commit.
This reverts commit 48264ee506.
Revert "Purity checking should accept $TMP and not just /tmp"
This reverts commit fb777be7d2.
I hate the thing too even though I made it, and rather just get rid of
it. But we can't do that yet. In the meantime, this brings us more
inline with autoconf and will make it slightly easier for me to write a
pkg-config wrapper, which we need.
Before, we'd always use `cc = null`, and check for that. The problem is
this breaks for cross compilation to platforms that don't support a C
compiler.
It's a very subtle issue. One might think there is no problem because we
have `stdenvNoCC`, and presumably one would only build derivations that
use that. The problem is that one still wants to use tools at build-time
that are themselves built with a C compiler, and those are gotten via
"splicing". The runtime version of those deps will explode, but the
build time / `buildPackages` versions of those deps will be fine, and
splicing attempts to work this by using `builtins.tryEval` to filter out
any broken "higher priority" packages (runtime is the default and
highest priority) so that both `foo` and `foo.nativeDrv` works.
However, `tryEval` only catches certain evaluation failures (e.g.
exceptions), and not arbitrary failures (such as `cc.attr` when `cc` is
null). This means `tryEval` fails to let us use our build time deps, and
everything comes apart.
The right solution is, as usually, to get rid of splicing. Or, baring
that, to make it so `foo` never works and one has to explicitly do
`foo.*`. But that is a much larger change, and certaily one unsuitable
to be backported to stable.
Given that, we instead make an exception-throwing `cc` attribute, and
create a `hasCC` attribute for those derivations which wish to
condtionally use a C compiler: instead of doing `stdenv.cc or null ==
null` or something similar, one does `stdenv.hasCC`. This allows quering
without "tripping" the exception, while also allowing `tryEval` to work.
No platform without a C compiler is yet wired up by default. That will
be done in a following commit.
Adds pkgsCross.wasm32 and pkgsCross.wasm64. Use it to build Nixpkgs
with a WebAssembly toolchain.
stdenv/cross: use static overlay on isWasm
isWasm doesn’t make sense dynamically linked.
* add generic x86_32 support
- Add support for i386-i586.
- Add `isx86_32` predicate that can replace most uses of `isi686`.
- `isi686` is reinterpreted to mean "exactly i686 arch, and not say i585 or i386".
- This branch was used to build working i586 kernel running on i586 hardware.
* revert `isi[345]86`, remove dead code
- Remove changes to dead code in `doubles.nix` and `for-meta.nix`.
- Remove `isi[345]86` predicates since other cpu families don't have specific model predicates.
* remove i386-linux since linux not supported on that cpu
With the previous commit `propagateDoc` is now always given the correct value
(i.e. it is never set to `true` when there are no `man` and `info` outputs).
Hence, we can simply symlink the original outputs to the wrapper outputs.
Pros:
- simpler, less indirection compared to `propagated-user-env-packages`,
- uses less inodes (1 symlink, which nix then simply automatically resolves
and removes, vs. two directories and a file),
- makes direct references like "export MANPATH=${stdenv.cc.man}/share/man"
simply work.
Cons:
- I'm not aware of any.
This and the previous commit together almost completely revert commits
fde7296a47,
fa41297209, and
c981787db9.
- respect libc’s incdir and libdir
- make non-unix systems single threaded
- set LIMITS_H_TEST to false for avr
- misc updates to support new libc’s
- use multilib with avr
For threads we want to use:
- posix on unix systems
- win32 on windows
- single on everything else
For avr:
- add library directories for avrlibc
- to disable relro and bind
- avr5 should have precedence over avr3 - otherwise gcc uses the wrong one
02c09e0171 (NixOS/nixpkgs#44558) was reverted in
c981787db9 but, as it turns out, it fixed an issue
I didn't know about at the time: the values of `propagateDoc` options were
(and now again are) inconsistent with the underlying things those wrappers wrap
(see NixOS/nixpkgs#46119), which was (and now is) likely to produce more instances
of NixOS/nixpkgs#43547, if not now, then eventually as stdenv changes.
This patch (which is a simplified version of the original reverted patch) is the
simplest solution to this whole thing: it forces wrappers to directly inspect the
outputs of the things they are wrapping instead of making stdenv guess the correct
values.
