nixpkgs/nixos/modules/services/hardware/fancontrol.nix

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

56 lines
1.7 KiB
Nix
Raw Normal View History

2019-09-25 02:23:59 +00:00
{ config, lib, pkgs, ... }:
with lib;
let
2019-09-25 11:43:06 +00:00
cfg = config.hardware.fancontrol;
configFile = pkgs.writeText "fancontrol.conf" cfg.config;
2019-09-25 02:23:59 +00:00
in
{
options.hardware.fancontrol = {
enable = mkEnableOption (lib.mdDoc "software fan control (requires fancontrol.config)");
config = mkOption {
type = types.lines;
description = lib.mdDoc "Required fancontrol configuration file content. See {manpage}`pwmconfig(8)` from the lm_sensors package.";
example = ''
# Configuration file generated by pwmconfig
INTERVAL=10
DEVPATH=hwmon3=devices/virtual/thermal/thermal_zone2 hwmon4=devices/platform/f71882fg.656
DEVNAME=hwmon3=soc_dts1 hwmon4=f71869a
FCTEMPS=hwmon4/device/pwm1=hwmon3/temp1_input
FCFANS=hwmon4/device/pwm1=hwmon4/device/fan1_input
MINTEMP=hwmon4/device/pwm1=35
MAXTEMP=hwmon4/device/pwm1=65
MINSTART=hwmon4/device/pwm1=150
MINSTOP=hwmon4/device/pwm1=0
'';
2019-09-25 02:23:59 +00:00
};
};
config = mkIf cfg.enable {
2019-09-25 02:23:59 +00:00
systemd.services.fancontrol = {
documentation = [ "man:fancontrol(8)" ];
description = "software fan control";
2019-09-25 02:23:59 +00:00
wantedBy = [ "multi-user.target" ];
after = [ "lm_sensors.service" ];
2019-09-25 02:23:59 +00:00
serviceConfig = {
2021-05-22 11:58:17 +00:00
Restart = "on-failure";
ExecStart = "${pkgs.lm_sensors}/sbin/fancontrol ${configFile}";
2019-09-25 02:23:59 +00:00
};
};
# On some systems, the fancontrol service does not resume properly after sleep because the pwm status of the fans
# is not reset properly. Restarting the service fixes this, in accordance with https://github.com/lm-sensors/lm-sensors/issues/172.
powerManagement.resumeCommands = ''
systemctl restart fancontrol.service
'';
2019-09-25 02:23:59 +00:00
};
meta.maintainers = [ maintainers.evils ];
2019-09-25 02:23:59 +00:00
}