I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
A couple of tests require building some libraries that depend on Nix,
and assume it to be built locally.
Don't run these if we only want to run the install tests.
This prevents the CI from rebuilding several times Nix (like in
https://github.com/NixOS/nix/actions/runs/6404422275/job/17384964033#step:6:6412), thus removing a fair amount of build time.
Continue with the characterization testing idioms begun in
c70484454f, but this time for unit tests.
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
Interface has changed upstream.
It *should* be fine to test 23.05's other Nix versions as those
*should* succeed, but that's not the case and it's obfuscating
our terrible CI setup's log.
Source filtering is a really cool Nix feature that lets us avoid a
lot of rebuilds, which speeds up the iteration cycle a lot in cases
where the relevant source files aren't actually modified.
We used to have a source filter that marked a few files as irrelevant,
but this is the wrong approach, as we have many more files that are
irrelevant. We may call this negative filtering.
This commit switches the source filtering to positive filtering, which
is a lot more robust. Instead of marking which files we don't need
we marked the files that we do need.
It's a superior approach because it is fail safe. Instead of allowing
build performance problems to creep in over time, we require that all
source inputs are declared.
I shouldn't have to explain that declaring inputs is a good practice,
so I'll stop over-explaining here.
I do have to acknowledge that this will cause a build failure when the
filter is incomplete. This is *good*, because it's the only realistic
way we could be reminded of these problems. These events will be
infrequent, so the small cost of extending the filter is worth it,
compared to the hidden cost of longer dev cycles for things like tests,
docker image, etc, etc.
(Also rebuilding Nix for stupid unnecessary reasons makes my blood boil)
Previously, for tarball flakes, we recorded the original URL of the
tarball flake, rather than the URL to which it ultimately
redirects. Thus, a flake URL like
http://example.org/patchelf-latest.tar that redirects to
http://example.org/patchelf-<revision>.tar was not really usable. We
couldn't record the redirected URL, because sites like GitHub redirect
to CDN URLs that we can't rely on to be stable.
So now we use the redirected URL only if the server returns the
`x-nix-is-immutable` or `x-amz-meta-nix-is-immutable` headers in its
response.
Currently it gives a 500 error with "Do not know how to serve path
'/nix/store/bym5sm8z2wpavnvzancb9gjdlgyzs1l8-nix-internal-api-docs-2.15.0pre20230320_e37f436/share/doc/nix/internal-api'."
The motivation is as stated in issue #7814: even though the the C++ API
is internal and unstable, people still want it to be well documented for
sake of learning, code review, and other purposes that aren't predicated
on it being stable.
Fixes#7814
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This was failing because the check for the existence of the
'installcheck' target failed silently, so the whole phase got
skipped. It works by running 'make -n installcheck 2> /dev/null',
which however barfs with
/nix/store/039g378vc3pc3dvi9dzdlrd0i4q93qwf-binutils-2.39/bin/ld.gold: error: cannot open tests/plugins/plugintest.o: No such file or directory
Fixes#8004.
Building without tests is useful for bootstrapping with a smaller footprint
or running the tests in a separate derivation. Otherwise, we do compile and
run them.
This isn't fine grained as to allow picking `check` but not `installcheck`
or vice versa, but it's good enough for now.
I've tried to use Nixpkgs' `checkInputs`, but those inputs weren't discovered
properly by the configure script. We can emulate its behavior very well though.
Some dependencies supposed to be skipped in the cross build, along with
not using the gold linker. But in https://github.com/NixOS/nix/pull/6538
this was accidentally not preserved.
Also since https://github.com/NixOS/nix/pull/6538 we saw some new
aarch64-linux static build failures. This is a first attempt to try to
fix those failures. If this is not sufficient, there are other things we
can try next.
- `nixpkgsFor` does all of native, static, cross, and the different stdenvs.
- The main Nix derivation is no longer duplicated for static.
- DRY nixpkgs.lib and lib.genAttrs calls.
- Refer to current version in readme
- Split into flakes and non-flakes section
- Change order to move nix-build to the end, since people often start
with it in the beginning.
- Use proper "Note" syntax
- Add notes about editor integration
- Move information about target platforms and stdenvs into separate
sections
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Alexander Bantyev <alexander.bantyev@tweag.io>
Co-authored-by: Théophane Hufschmitt <theophane.hufschmitt@tweag.io>
The issue *seems* to be the cross jobs, which are missing the `CXXFLAGS`
needed to get rapidcheck.
PR #6538 would be really nice to resurrect which will prevent the
`configureFlags` from going out of sync between the regular build and
the cross build again.
mdbook-linkcheck is not consistent about its warning setting.
It disables some warnings, but not the warnings about lack of
fragment checking support; hence the extra filtering.
This runs the installer in a QEMU VM. Unlike the old installer test
that ran inside a declaratively built RedHat/Debian image, this uses
an image from Vagrant.
With this, Nix will write a copy of the sandbox shell to /bin/sh in
the sandbox rather than bind-mounting it from the host filesystem.
This makes /bin/sh work out of the box with nix-static, i.e. you no
longer get
/nix/store/qa36xhc5gpf42l3z1a8m1lysi40l9p7s-bootstrap-stage4-stdenv-linux/setup: ./configure: /bin/sh: bad interpreter: No such file or directory
Python is only pulled into the build closure by Mercurial, which might end up being removed.
Let’s port the script to jq, which is more likely to stay.
Apart from a slight simplification and a bit of dogfooding, this also
make the cache behavior more predictable.
For example `nix build .` and `nix build nix/$(git rev-parse HEAD)` will
yield the exact same path, while their “intuitive” non-flake equivalents
(`nix-build` and
`nix-build https://github.com/nixos/nix/archives/$(git rev-parse HEAD).tar.gz`)
don’t.
This was a pain for example in https://github.com/NixOS/nix/pull/5059
Also, the `bar-with-logs` log format is imho nicer (even in an
non-interactive context) because prefixing each log line with the name
of the derivation that produced it makes it much easier to follow what’s
going on.
We explicitly hack around to remove them, so might as well check that
the hack is useful.
(Introduced because I feared that the changes of
https://github.com/NixOS/nix/pull/5906#discussion_r784810238 would bring
back some runtime references)
For a (currently hardcoded and limited) list of stdenvs,
make `.#$nix-${stdenvName}` correspond to a Nix built with the
corresponding stdenv.
For example, `.#nix-${clang11Stdenv}` is Nix built with clang11.
Likewise, `devShells.x86_64-linux.clang11StdenvPackages` is a development
shell for Nix with clang11, that can be used with
```shell
nix develop .#clang11StdenvPackages
```
Fix#4129
/cc @pamplemousse
Fixes the problem where a stack pointer outside the original
thread causes the collector to crash.
It could be made more accurate by recording the stack pointer
every time we switch to a coroutine. We can use this information
to update our own coroutine stacks like normal data. When the
stack pointer is on a thread, we can add a field to GC_thread
"fallback_sp" to be used when the thread sp is outside the original
thread range.
This requires adding `nix` to its own closure which is a bit unfortunate,
but as it is optional (the test will be disabled if `OUTER_NIX` is unset) it
shouldn't be too much of an issue.
(Ideally this should go in another derivation so that we can build Nix and run
the test independently, but as the tests are running in the same derivation
as the build it's a bit complicated to do so).
When performing distributed builds of machine learning packages, it
would be nice if builders without the required SIMD instructions can
be excluded as build nodes.
Since x86_64 has accumulated a large number of different instruction
set extensions, listing all possible extensions would be unwieldy.
AMD, Intel, Red Hat, and SUSE have recently defined four different
microarchitecture levels that are now part of the x86-64 psABI
supplement and will be used in glibc 2.33:
https://gitlab.com/x86-psABIs/x86-64-ABIhttps://lwn.net/Articles/844831/
This change uses libcpuid to detect CPU features and then uses them to
add the supported x86_64 levels to the additional system types. For
example on a Ryzen 3700X:
$ ~/aps/bin/nix -vv --version | grep "Additional system"
Additional system types: i686-linux, x86_64-v1-linux, x86_64-v2-linux, x86_64-v3-linux
We upgrade to lowdown 0.8.0 [1] which contains a fix/improvement to a
behavior mentioned in this issue thread [2] where a big part of
lowdown's API would just call exit(1) on allocation errors since that
is a satisfying behavior for the lowdown binary.
Now lowdown_term_rndr returns 0 if an allocation error occurred which we
check for in libcmd/markdown.cc.
Also the extern "C" { } wrapper around lowdown.h has been removed as it
is not necessary.
[1]: 6ca7c855a0/versions.xml (L987-L1006)
[2]: https://github.com/kristapsdz/lowdown/issues/45#issuecomment-756681153
Until now, it was not possible to substitute missing paths from e.g.
`https://cache.nixos.org` on a remote server when building on it using
the new `ssh-ng` protocol.
This is because every store implementation except legacy `ssh://`
ignores the substitution flag passed to `Store::queryValidPaths` while
the `legacy-ssh-store` substitutes the remote store using
`cmdQueryValidPaths` when the remote store is opened with `nix-store
--serve`.
This patch slightly modifies the daemon protocol to allow passing an
integer value suggesting whether to substitute missing paths during
`wopQueryValidPaths`. To implement this on the daemon-side, the
substitution logic from `nix-store --serve` has been moved into a
protected method named `Store::substitutePaths` which gets currently
called from `LocalStore::queryValidPaths` and `Store::queryValidPaths`
if `maybeSubstitute` is `true`.
Fixes#2770
The move from release.nix to flake.nix appears to have lost some
changes from #3628 / 1c56f18a81, leaving
create-darwin-volume.sh out of the release tarball.
Under the assumption that this was just an accident/byproduct of when
flake.nix split off and not intentional, I am restoring those edits.
checks should be relatively fast, but buildStatic depends on a lot of
stuff that isn't in the binary cache (e.g. musl builds of Git and
Mercurial that we probably don't need since we don't link against
them...).
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
