Commit Graph

156 Commits

Author SHA1 Message Date
Eelco Dolstra
fb9368b5a0 * Sync with the trunk. 2010-11-16 12:49:47 +00:00
Eelco Dolstra
3d71c8013e * Use pkgconfig to locate the Boehm GC (as suggested by Ludo), if
--enable-gc is given.
2010-10-29 14:00:47 +00:00
Eelco Dolstra
64c3325b0b * Make building against the Boehm GC a configure option. 2010-10-22 13:39:15 +00:00
Eelco Dolstra
95f4f2cf61 * If std::tr1::unordered_set is unavailable, use std::set. 2010-10-04 16:16:19 +00:00
Eelco Dolstra
e41ecbf730 2010-08-27 11:09:04 +00:00
Eelco Dolstra
5fb824e896 * Urgh, this was supposed to go in the trunk... 2010-08-12 13:36:56 +00:00
Eelco Dolstra
5c5ab2bc12 * Don't link against pthreads. This was added way back in r211
because Berkeley DB needed it on some platforms, but we don't use
  BDB anymore.

  On FreeBSD, if you link against pthreads, then the main thread gets
  a 2 MB stack which cannot be overriden (it ignores "ulimit -s"):

    http://www.mail-archive.com/freebsd-hackers@freebsd.org/msg62445.html
  
  This is not enough for Nix.  For instance, the garbage collector can
  fail if there is a pathologically deep chain of references
  (http://hydra.nixos.org/build/556199).  2 MB is also not enough for
  many Nix expressions.
  
  Arguably the garbage collector shouldn't use recursion, because in
  NixOS unprivileged users can DOS the garbage collector by creating a
  sufficiently deeply nested chain of references.  But getting rid of
  recursion is a bit harder.
2010-08-12 13:34:34 +00:00
Eelco Dolstra
d7875d1648 * Use SQLite 3.7.0.1. 2010-08-06 07:51:27 +00:00
Eelco Dolstra
587dc8aa00 * Sync with the trunk. 2010-08-04 17:48:29 +00:00
Eelco Dolstra
fd9c77dfc7 * Use SQLite 3.7.0's write-ahead logging (WAL mode). This is a lot
faster than the old mode when fsyncs are enabled, because it only
  performs an fsync() when doing a checkpoint, rather than at every
  commit.  Some timings for doing a "nix-instantiate /etc/nixos/nixos
  -A system" after modifying the stdenv setup script:

    42.5s - SQLite 3.6.23 with truncate mode and fsync
     3.4s - SQLite 3.6.23 with truncate mode and no fsync
    32.1s - SQLite 3.7.0 with truncate mode and fsync
    16.8s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
            every 1000 pages
     8.3s - SQLite 3.7.0 with WAL mode and fsync, auto-checkpoint
            every 8192 pages
     1.7s - SQLite 3.7.0 with WAL mode and no fsync

  The default is now to use WAL mode with fsyncs.  Because WAL doesn't
  work on remote filesystems such as NFS (as it uses shared memory),
  truncate mode can be re-enabled by setting the "use-sqlite-wal"
  option to false.
2010-08-04 17:35:59 +00:00
Peter Simons
a0d29040f7 Revert "configure.ac: make flex and bison required programs"
This reverts commit 22405. Apparently, these programs aren't necessarily
required when building from a release archive.
2010-06-24 22:22:24 +00:00
Peter Simons
af09fe12dd Fix build of bsdiff-4.3 on machines that don't have <err.h>, such as Solaris. 2010-06-24 17:51:31 +00:00
Peter Simons
d63375d529 configure.ac: Incredibly enough, tr(1) on Solaris doesn't understand A-Z syntax for ranges. 2010-06-24 17:51:24 +00:00
Peter Simons
4c21c016c5 configure.ac: make flex and bison required programs
The build fails if these tools aren't available.
2010-06-24 17:51:19 +00:00
Eelco Dolstra
aa45027818 * Sync with the trunk. 2010-05-12 22:13:09 +00:00
Eelco Dolstra
d66ea83a76 * Sync with the trunk. 2010-04-20 09:20:29 +00:00
Eelco Dolstra
f3b8833a48 * Drop the dependency on the ATerm library. 2010-04-19 14:51:58 +00:00
Eelco Dolstra
f71ea9c911 * Use SQLite 3.6.23. 2010-03-23 10:38:59 +00:00
Lluís Batlle i Rossell
13cce8ec45 Making 'bin2c' to be built with the compiler for the local system.
I copied the configure.ac code about CC_FOR_BUILD from libX11.
2010-03-11 20:56:25 +00:00
Eelco Dolstra
070057c1b9 * Sync with the trunk. 2010-03-11 10:52:52 +00:00
Eelco Dolstra
05fbf61f0e * nix-prefetch-url depends on sed (see
http://hydra.nixos.org/build/311170).
2010-03-05 18:26:47 +00:00
Eelco Dolstra
d8c5745c41 * Support static builds. 2010-03-02 17:12:47 +00:00
Eelco Dolstra
5414b3b2db * Remove the --enable-static-nix flag. 2010-03-02 16:40:40 +00:00
Eelco Dolstra
594eaddd11 * When using the included sqlite/aterm libraries, build with
--enable-shared.
* In libutil/libstore/libexpr etc., link against sqlite and aterm.
* Some more header file hygiene.
2010-03-02 15:58:13 +00:00
Eelco Dolstra
84a4dd5ff0 * Don't use fdatasync since it doesn't work on Snow Leopard.
* Don't refer to config.h in util.hh, because config.h is not
  installed (http://hydra.nixos.org/build/303053).
2010-02-24 15:46:06 +00:00
Eelco Dolstra
fae0427324 * ADDITIONAL_NETWORK_LIBS -> LIBS. 2010-02-24 12:25:48 +00:00
Eelco Dolstra
5954eadf67 * Remove the fdatasync check since it's no longer needed. 2010-02-24 12:16:50 +00:00
Eelco Dolstra
b4e6d98fc3 * configure: flag --with-sqlite. 2010-02-23 22:12:46 +00:00
Eelco Dolstra
c1a07f9445 * Convert the Nix database to SQLite. 2010-02-18 13:16:59 +00:00
Eelco Dolstra
2723d9b56e * If fdatasync() isn't available, use fsync(). 2010-02-02 11:57:49 +00:00
Eelco Dolstra
327a232c85 * Remove support for old (before Nix 0.12pre12020) databases. 2009-11-06 01:15:44 +00:00
Sander van der Burg
53a4981fa2 Added optional parameter which adds -lnsl -lsocket to make the Nix package manager work on OpenSolaris 2009-10-08 14:50:37 +00:00
Peter Simons
18f0ff003d configure.ac: use AC_SYS_LARGEFILE to determine how to enable 64-bit file size support
Defining -D_FILE_OFFSET_BITS=64 works on most platforms, but not on all (i.e.
Solaris). Also, the Autoconf macro offers the user a switch to disable the
functionality in case of problems.
2009-10-06 09:14:06 +00:00
Eelco Dolstra
51ad64cc07 * Use xmllint (>= 2.7.4) for RelaxNG validation instead of Jing. 2009-09-18 11:45:56 +00:00
Eelco Dolstra
6a5599fd01 * Typo. 2009-05-07 11:33:57 +00:00
Eelco Dolstra
9856efc7b0 * Support doing a fully static build. Statically linked Nix binaries
will be useful as a fallback on platforms for which there are no
  RPMs/Debs available.
2009-03-26 12:22:08 +00:00
Eelco Dolstra
77d272623f * NAR archives: handle files larger than 2^32 bytes. Previously it
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
  isn't a NAR archive.
2009-03-22 17:36:43 +00:00
Eelco Dolstra
be88248add * Make the version available to release.nix. 2009-03-09 15:05:08 +00:00
Eelco Dolstra
c504d90c11 * Support i686-linux builds directly on x86_64-linux Nix
installations.  This is implemented using the personality() syscall,
  which causes uname to return "i686" in child processes.
2009-01-12 16:30:32 +00:00
Eelco Dolstra
ac36c6cd44 * Some hackery to make "make check" succeed on Cygwin. 2008-12-12 15:36:18 +00:00
Eelco Dolstra
2b70a8e7c9 * Detect whether unshare() is available. 2008-12-12 13:41:36 +00:00
Eelco Dolstra
7c54f1603f * Do chroot builds in a private namespace. This means that all the
bind-mounts we do are only visible to the builder process and its
  children.  So accidentally doing "rm -rf" on the chroot directory
  won't wipe out /nix/store and other bind-mounted directories
  anymore.  Also, the bind-mounts in the private namespace disappear
  automatically when the builder exits.
2008-12-11 17:00:12 +00:00
Eelco Dolstra
5d4eb9dd07 * Moved the build farm job for building Nix to the Nix tree. 2008-11-26 01:13:29 +00:00
Eelco Dolstra
2ab09a55cf * Bump the version number. 2008-11-20 21:51:58 +00:00
Eelco Dolstra
285d26374a * Don't set the prefix to /nix by default, rather use the Autoconf
default of /usr/local.  However, localstatedir and storedir are set
  to /nix/var/nix and /nix/store respectively unless they're
  explicitly overriden.
2008-11-20 14:14:35 +00:00
Eelco Dolstra
b0e92f6d47 * Merged the no-bdb branch (-r10900:HEAD
https://svn.nixos.org/repos/nix/nix/branches/no-bdb).
2008-06-09 13:52:45 +00:00
Michael Raskin
b4bc8b7616 --proxy=proxy:3128 2008-05-07 14:18:28 +00:00
Eelco Dolstra
658816ddc9 * Make really sure that we use bash. The line
NEED_PROG(shell, bash)

  actually uses the content of $shell if set, which often points at
  /bin/sh.
2008-04-10 09:54:23 +00:00
Eelco Dolstra
895c953817 * Bumped the version number to 0.12. 2007-12-31 17:53:59 +00:00
Eelco Dolstra
df303666bc * Use strsignal if available to give better error messages for
builders that fail due to a signal.
2007-12-14 14:49:35 +00:00