Closes#10585
As it turns out, libseccomp maintains an internal syscall table and
validates each rule against it. This means that when using libseccomp
2.5.4 or older, one may pass `452` as syscall number against it, but
since it doesn't exist in the internal structure, `libseccomp` will refuse
to create a filter for that. This happens with nixpkgs-23.11, i.e. on
stable NixOS and when building Nix against the project's flake.
To work around that
* a backport of libseccomp 2.5.5 on upstream nixpkgs has been
scheduled[1].
* the package now uses libseccomp 2.5.5 on its own already. This is to
provide a quick fix since the correct fix for 23.11 is still a staging cycle
away.
It must not be possible to build a Nix with an incompatible libseccomp
version (nothing can be built in a sandbox on Linux!), so configure.ac
rejects libseccomp if `__SNR_fchmodat2` is not defined.
We still need the compat header though since `SCMP_SYS(fchmodat2)`
internally transforms this into `__SNR_fchmodat2` which points to
`__NR_fchmodat2` from glibc 2.39, so it wouldn't build on glibc 2.38.
The updated syscall table from libseccomp 2.5.5 is NOT used for that
step, but used later, so we need both, our compat header and their
syscall table 🤷
[1] https://github.com/NixOS/nixpkgs/pull/306070
(cherry picked from commit 73918b0ae4)
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
and seccomp 2.5.5 are needed to have the correct syscall number available
via `__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I tested the change by adding the diff below as patch to
`pkgs/tools/package-management/nix/common.nix` & then built a VM from
the following config using my dirty nixpkgs master:
{
vm = { pkgs, ... }: {
virtualisation.writableStore = true;
virtualisation.memorySize = 8192;
virtualisation.diskSize = 12 * 1024;
nix.package = pkgs.nixVersions.nix_2_21;
};
}
The original issue can be triggered via
nix build -L github:nixos/nixpkgs/d6dc19adbda4fd92fe9a332327a8113eaa843894#lxc \
--extra-experimental-features 'nix-command flakes'
however the problem disappears with this patch applied.
Closes#10424
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
(cherry picked from commit ba68045187)
Instead of running the builds under
`$TMPDIR/{unique-build-directory-owned-by-the-build-user}`, run them
under `$TMPDIR/{unique-build-directory-owned-by-the-daemon}/{subdir-owned-by-the-build-user}`
where the build directory is only readable and traversable by the daemon user.
This achieves two things:
1. It prevents builders from making their build directory world-readable
(or even writeable), which would allow the outside world to interact
with them.
2. It prevents external processes running as the build user (either
because that somehow leaked, maybe as a consequence of 1., or because
`build-users` isn't in use) from gaining access to the build
directory.
fix: do not use unknown setting
tests: remove build-dir test
the location of files is hard-coded by mdBook.
there is also seems to be no way to define custom templates, therefore
all styling has to be done in the CSS override.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
As discussed in the maintainer meeting on 2024-01-29.
Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.
What matters most is preventing a situation where . or .. can be
injected, and to just get this done.
It is possible to exfiltrate a file descriptor out of the build sandbox
of FODs, and use it to modify the store path after it has been
registered.
To avoid that issue, don't register the output of the build, but a copy
of it (that will be free of any leaked file descriptor).
Co-authored-by: Theophane Hufschmitt <theophane.hufschmitt@tweag.io>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Test that we can't leverage abstract unix domain sockets to leak file
descriptors out of the sandbox and modify the path after it has been
registered.
Co-authored-by: Theophane Hufschmitt <theophane.hufschmitt@tweag.io>
This PR reduces the creation of short-lived basic_json objects while
parsing flake.lock files. For large flake.lock files (~1.5MB) I was
observing ~60s being spent for trivial nix build operations while
after this change it is now taking ~1.6s.
(cherry picked from commit 7fd0de38c6)
bef68e53b9 (backport of
31ebc6028b) accidentally broke the build
because of a change in the constructor of `SourcePath` between 2.18 and
master. Fix that.
Previously, IFDs would be built within the eval store, even though one
is typically using `--eval-store` precisely to *avoid* local builds.
Because the resulting Nix expression must be copied back to the eval
store in order to be imported, this requires the eval store to trust
the build store's signatures.
(cherry picked from commit c3942ef85f)
this part must have been moved quite a while ago, but apparently so far
no one noticed
(cherry picked from commit 6db805b3d1)
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This is good in general (see how the other libraries also have long had
it, since 49fe9592a4) but in particular
needed to fix the NetBSD build.
(cherry picked from commit b23273f6a2)
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
(cherry picked from commit 91b6833686)
(cherry picked from commit a61e42adb5)
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
(cherry picked from commit 68c81c7375)
up to now, those were managed outside of this repo, which as
unsurprisingly a real hassle to deal with if one wanted to prevent URLs
from breaking when moving pages around. this change removes a large part
of the friction involved in moving content in the Nix manual.
possible next steps for further automation:
- check for content that moved and warn if it's not reachable from
links that were valid prior to a change
- create redirect rules automatically based on this information
(cherry picked from commit 2b7016cc56)
https://github.com/NixOS/nixpkgs/pull/269064 makes rapidcheck be build
as a shared lib, but that broke Nix because the `-lrapidcheck` was
missing. This fixes that (and doesn't break Nix what the library is a
static archive as today).
(cherry picked from commit 46131567da)
I'm sure that we'll adjust the implementation over time, but this
at least discerns between an apple silicon bare metal machine and
a tart VM.
(cherry picked from commit 9277eb276b)
