mirror of
https://github.com/embassy-rs/embassy.git
synced 2024-11-24 15:52:34 +00:00
152 lines
7.2 KiB
TOML
152 lines
7.2 KiB
TOML
[package]
|
|
name = "embassy-rp"
|
|
version = "0.2.0"
|
|
edition = "2021"
|
|
license = "MIT OR Apache-2.0"
|
|
description = "Embassy Hardware Abstraction Layer (HAL) for the Raspberry Pi RP2040 microcontroller"
|
|
keywords = ["embedded", "async", "raspberry-pi", "rp2040", "embedded-hal"]
|
|
categories = ["embedded", "hardware-support", "no-std", "asynchronous"]
|
|
repository = "https://github.com/embassy-rs/embassy"
|
|
documentation = "https://docs.embassy.dev/embassy-rp"
|
|
|
|
[package.metadata.embassy_docs]
|
|
src_base = "https://github.com/embassy-rs/embassy/blob/embassy-rp-v$VERSION/embassy-rp/src/"
|
|
src_base_git = "https://github.com/embassy-rs/embassy/blob/$COMMIT/embassy-rp/src/"
|
|
features = ["defmt", "unstable-pac", "time-driver"]
|
|
flavors = [
|
|
{ name = "rp2040", target = "thumbv6m-none-eabi", features = ["rp2040"] },
|
|
{ name = "rp235xa", target = "thumbv8m.main-none-eabihf", features = ["rp235xa"] },
|
|
{ name = "rp235xb", target = "thumbv8m.main-none-eabihf", features = ["rp235xb"] },
|
|
]
|
|
|
|
[package.metadata.docs.rs]
|
|
features = ["defmt", "unstable-pac", "time-driver"]
|
|
|
|
[features]
|
|
default = [ "rt" ]
|
|
## Enable the rt feature of [`rp-pac`](https://docs.rs/rp-pac). This brings in the [`cortex-m-rt`](https://docs.rs/cortex-m-rt) crate, which adds startup code and minimal runtime initialization.
|
|
rt = [ "rp-pac/rt" ]
|
|
|
|
## Enable [defmt support](https://docs.rs/defmt) and enables `defmt` debug-log messages and formatting in embassy drivers.
|
|
defmt = ["dep:defmt", "embassy-usb-driver/defmt", "embassy-hal-internal/defmt"]
|
|
|
|
## Configure the [`critical-section`](https://docs.rs/critical-section) crate to use an implementation that is safe for multicore use on rp2040.
|
|
critical-section-impl = ["critical-section/restore-state-u8"]
|
|
|
|
## Reexport the PAC for the currently enabled chip at `embassy_rp::pac`.
|
|
## This is unstable because semver-minor (non-breaking) releases of `embassy-rp` may major-bump (breaking) the PAC version.
|
|
## If this is an issue for you, you're encouraged to directly depend on a fixed version of the PAC.
|
|
## There are no plans to make this stable.
|
|
unstable-pac = []
|
|
|
|
## Enable the timer for use with `embassy-time` with a 1MHz tick rate.
|
|
time-driver = ["dep:embassy-time-driver", "embassy-time-driver?/tick-hz-1_000_000"]
|
|
|
|
## Enable ROM function cache. This will store the address of a ROM function when first used, improving performance of subsequent calls.
|
|
rom-func-cache = []
|
|
## Enable implementations of some compiler intrinsics using functions in the rp2040 Mask ROM.
|
|
## These should be as fast or faster than the implementations in compiler-builtins. They also save code space and reduce memory contention.
|
|
## Compiler intrinsics are used automatically, you do not need to change your code to get performance improvements from this feature.
|
|
intrinsics = []
|
|
## Enable intrinsics based on extra ROM functions added in the v2 version of the rp2040 Mask ROM.
|
|
## This version added a lot more floating point operations - many f64 functions and a few f32 functions were added in ROM v2.
|
|
rom-v2-intrinsics = []
|
|
|
|
## Allow using QSPI pins as GPIO pins. This is mostly not what you want (because your flash is attached via QSPI pins)
|
|
## and adds code and memory overhead when this feature is enabled.
|
|
qspi-as-gpio = []
|
|
|
|
## Indicate code is running from RAM.
|
|
## Set this if all code is in RAM, and the cores never access memory-mapped flash memory through XIP.
|
|
## This allows the flash driver to not force pausing execution on both cores when doing flash operations.
|
|
run-from-ram = []
|
|
|
|
#! ### boot2 flash chip support
|
|
#! RP2040's internal bootloader is only able to run code from the first 256 bytes of flash.
|
|
#! A 2nd stage bootloader (boot2) is required to run larger programs from external flash.
|
|
#! Select from existing boot2 implementations via the following features. If none are selected,
|
|
#! boot2-w25q080 will be used (w25q080 is the flash chip used on the pico).
|
|
#! Each implementation uses flash commands and timings specific to a QSPI flash chip family for better performance.
|
|
## Use boot2 with support for Renesas/Dialog AT25SF128a SPI flash.
|
|
boot2-at25sf128a = []
|
|
## Use boot2 with support for Gigadevice GD25Q64C SPI flash.
|
|
boot2-gd25q64cs = []
|
|
## Use boot2 that only uses generic flash commands - these are supported by all SPI flash, but are slower.
|
|
boot2-generic-03h = []
|
|
## Use boot2 with support for ISSI IS25LP080 SPI flash.
|
|
boot2-is25lp080 = []
|
|
## Use boot2 that copies the entire program to RAM before booting. This uses generic flash commands to perform the copy.
|
|
boot2-ram-memcpy = []
|
|
## Use boot2 with support for Winbond W25Q080 SPI flash.
|
|
boot2-w25q080 = []
|
|
## Use boot2 with support for Winbond W25X10CL SPI flash.
|
|
boot2-w25x10cl = []
|
|
## Have embassy not provide the boot2 so you can use your own.
|
|
## Place your own in the ".boot2" section like:
|
|
## ```
|
|
## #[link_section = ".boot2"]
|
|
## #[used]
|
|
## static BOOT2: [u8; 256] = [0; 256]; // Provide your own with e.g. include_bytes!
|
|
## ```
|
|
boot2-none = []
|
|
|
|
## Configure the hal for use with the rp2040
|
|
rp2040 = ["rp-pac/rp2040"]
|
|
_rp235x = ["rp-pac/rp235x"]
|
|
## Configure the hal for use with the rp235xA
|
|
rp235xa = ["_rp235x"]
|
|
## Configure the hal for use with the rp235xB
|
|
rp235xb = ["_rp235x"]
|
|
|
|
# hack around cortex-m peripherals being wrong when running tests.
|
|
_test = []
|
|
|
|
## Add a binary-info header block containing picotool-compatible metadata.
|
|
##
|
|
## Takes up a little flash space, but picotool can then report the name of your
|
|
## program and other details.
|
|
binary-info = ["rt", "dep:rp-binary-info", "rp-binary-info?/binary-info"]
|
|
|
|
[dependencies]
|
|
embassy-sync = { version = "0.6.0", path = "../embassy-sync" }
|
|
embassy-time-driver = { version = "0.1", path = "../embassy-time-driver", optional = true }
|
|
embassy-time = { version = "0.3.2", path = "../embassy-time" }
|
|
embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
|
|
embassy-hal-internal = {version = "0.2.0", path = "../embassy-hal-internal", features = ["cortex-m", "prio-bits-2"] }
|
|
embassy-embedded-hal = {version = "0.2.0", path = "../embassy-embedded-hal" }
|
|
embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver" }
|
|
atomic-polyfill = "1.0.1"
|
|
defmt = { version = "0.3", optional = true }
|
|
log = { version = "0.4.14", optional = true }
|
|
nb = "1.0.0"
|
|
cfg-if = "1.0.0"
|
|
cortex-m-rt = ">=0.6.15,<0.8"
|
|
cortex-m = "0.7.6"
|
|
critical-section = "1.1"
|
|
chrono = { version = "0.4", default-features = false, optional = true }
|
|
embedded-io = { version = "0.6.1" }
|
|
embedded-io-async = { version = "0.6.1" }
|
|
embedded-storage = { version = "0.3" }
|
|
embedded-storage-async = { version = "0.4.1" }
|
|
rand_core = "0.6.4"
|
|
fixed = "1.23.1"
|
|
|
|
rp-pac = { git = "https://github.com/embassy-rs/rp-pac.git", rev = "a7f42d25517f7124ad3b4ed492dec8b0f50a0e6c", feature = ["rt"] }
|
|
|
|
embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
|
|
embedded-hal-1 = { package = "embedded-hal", version = "1.0" }
|
|
embedded-hal-async = { version = "1.0" }
|
|
embedded-hal-nb = { version = "1.0" }
|
|
|
|
pio-proc = {version= "0.2" }
|
|
pio = {version= "0.2.1" }
|
|
rp2040-boot2 = "0.3"
|
|
document-features = "0.2.7"
|
|
sha2-const-stable = "0.1"
|
|
rp-binary-info = { version = "0.1.0", optional = true }
|
|
smart-leds = "0.4.0"
|
|
|
|
[dev-dependencies]
|
|
embassy-executor = { version = "0.6.1", path = "../embassy-executor", features = ["arch-std", "executor-thread"] }
|
|
static_cell = { version = "2" }
|