mirror of
https://github.com/embassy-rs/embassy.git
synced 2024-11-25 00:02:28 +00:00
107 lines
4.1 KiB
Plaintext
107 lines
4.1 KiB
Plaintext
MEMORY
|
|
{
|
|
/* This file is intended for parts in the STM32H723 family. (RM0468) */
|
|
/* - FLASH and RAM are mandatory memory sections. */
|
|
/* - The sum of all non-FLASH sections must add to 564k total device RAM. */
|
|
/* - The FLASH section size must match your device, see table below. */
|
|
|
|
/* FLASH */
|
|
/* Select the appropriate FLASH size for your device. */
|
|
/* - STM32H730xB 128K */
|
|
/* - STM32H723xE/725xE 512K */
|
|
/* - STM32H723xG/725xG/733xG/735xG 1M */
|
|
FLASH1 : ORIGIN = 0x08000000, LENGTH = 1M
|
|
|
|
/* Data TCM */
|
|
/* - Two contiguous 64KB RAMs. */
|
|
/* - Used for interrupt handlers, stacks and general RAM. */
|
|
/* - Zero wait-states. */
|
|
/* - The DTCM is taken as the origin of the base ram. (See below.) */
|
|
/* This is also where the interrupt table and such will live, */
|
|
/* which is required for deterministic performance. */
|
|
DTCM : ORIGIN = 0x20000000, LENGTH = 128K
|
|
|
|
/* Instruction TCM */
|
|
/* - More memory can be assigned to ITCM. See AXI SRAM notes, below. */
|
|
/* - Used for latency-critical interrupt handlers etc. */
|
|
/* - Zero wait-states. */
|
|
ITCM : ORIGIN = 0x00000000, LENGTH = 64K + 0K
|
|
|
|
/* AXI SRAM */
|
|
/* - AXISRAM is in D1 and accessible by all system masters except BDMA. */
|
|
/* - Suitable for application data not stored in DTCM. */
|
|
/* - Zero wait-states. */
|
|
/* - The 192k of extra shared RAM is fully allotted to the AXI SRAM by default. */
|
|
/* As a result: 64k (64k + 0k) for ITCM and 320k (128k + 192k) for AXI SRAM. */
|
|
/* This can be re-configured via the TCM_AXI_SHARED[1,0] register when more */
|
|
/* ITCM is required. */
|
|
AXISRAM : ORIGIN = 0x24000000, LENGTH = 128K + 192K
|
|
|
|
/* AHB SRAM */
|
|
/* - SRAM1-2 are in D2 and accessible by all system masters except BDMA, LTDC */
|
|
/* and SDMMC1. Suitable for use as DMA buffers. */
|
|
/* - SRAM4 is in D3 and additionally accessible by the BDMA. Used for BDMA */
|
|
/* buffers, for storing application data in lower-power modes. */
|
|
/* - Zero wait-states. */
|
|
SRAM1 : ORIGIN = 0x30000000, LENGTH = 16K
|
|
SRAM2 : ORIGIN = 0x30040000, LENGTH = 16K
|
|
SRAM4 : ORIGIN = 0x38000000, LENGTH = 16K
|
|
|
|
/* Backup SRAM */
|
|
/* Used to store data during low-power sleeps. */
|
|
BSRAM : ORIGIN = 0x38800000, LENGTH = 4K
|
|
}
|
|
|
|
/*
|
|
/* Assign the memory regions defined above for use. */
|
|
/*
|
|
|
|
/* Provide the mandatory FLASH and RAM definitions for cortex-m-rt's linker script. */
|
|
REGION_ALIAS(FLASH, FLASH1);
|
|
REGION_ALIAS(RAM, DTCM);
|
|
|
|
/* The location of the stack can be overridden using the `_stack_start` symbol. */
|
|
/* - Set the stack location at the end of RAM, using all remaining space. */
|
|
_stack_start = ORIGIN(RAM) + LENGTH(RAM);
|
|
|
|
/* The location of the .text section can be overridden using the */
|
|
/* `_stext` symbol. By default it will place after .vector_table. */
|
|
/* _stext = ORIGIN(FLASH) + 0x40c; */
|
|
|
|
/* Define sections for placing symbols into the extra memory regions above. */
|
|
/* This makes them accessible from code. */
|
|
/* - ITCM, DTCM and AXISRAM connect to a 64-bit wide bus -> align to 8 bytes. */
|
|
/* - All other memories connect to a 32-bit wide bus -> align to 4 bytes. */
|
|
SECTIONS {
|
|
.itcm (NOLOAD) : ALIGN(8) {
|
|
*(.itcm .itcm.*);
|
|
. = ALIGN(8);
|
|
} > ITCM
|
|
|
|
.axisram (NOLOAD) : ALIGN(8) {
|
|
*(.axisram .axisram.*);
|
|
. = ALIGN(8);
|
|
} > AXISRAM
|
|
|
|
.sram1 (NOLOAD) : ALIGN(4) {
|
|
*(.sram1 .sram1.*);
|
|
. = ALIGN(4);
|
|
} > SRAM1
|
|
|
|
.sram2 (NOLOAD) : ALIGN(4) {
|
|
*(.sram2 .sram2.*);
|
|
. = ALIGN(4);
|
|
} > SRAM2
|
|
|
|
.sram4 (NOLOAD) : ALIGN(4) {
|
|
*(.sram4 .sram4.*);
|
|
. = ALIGN(4);
|
|
} > SRAM4
|
|
|
|
.bsram (NOLOAD) : ALIGN(4) {
|
|
*(.bsram .bsram.*);
|
|
. = ALIGN(4);
|
|
} > BSRAM
|
|
|
|
};
|