fix broken links to embassy book

docs/pages/faq.adoc

@@ -299,7 +299,7 @@ You can add a section to your `Cargo.toml` file like this, you'll need to patch
 
 Using `patch` will replace all direct AND indirect dependencies.
 
-See the link:https://embassy.dev/book/dev/new_project.html#_cargo_toml[new project docs] for more details on this approach.
+See the link:https://embassy.dev/book/#_starting_a_new_project[new project docs] for more details on this approach.
 
 [source,toml]
 ----

docs/pages/getting_started.adoc

@@ -131,7 +131,7 @@ If you’re using a raspberry pi pico-w, make sure you’re running `+cargo run
 
 If you’re using an rp2040 debug probe (e.g. the pico probe) and are having issues after running `probe-rs info`, unplug and reconnect the probe, letting it power cycle. Running `probe-rs info` is link:https://github.com/probe-rs/probe-rs/issues/1849[known to put the pico probe into an unusable state].
 
-If you’re still having problems, check the link:https://embassy.dev/book/dev/faq.html[FAQ], or ask for help in the link:https://matrix.to/#/#embassy-rs:matrix.org[Embassy Chat Room].
+If you’re still having problems, check the link:https://embassy.dev/book/#_frequently_asked_questions[FAQ], or ask for help in the link:https://matrix.to/#/#embassy-rs:matrix.org[Embassy Chat Room].
 
 == What's next?
 

embassy-boot/README.md

@@ -24,7 +24,7 @@ For any partition, the following preconditions are required:
 
 The linker scripts for the application and bootloader look similar, but the FLASH region must point to the BOOTLOADER partition for the bootloader, and the ACTIVE partition for the application.
 
-For more details on the bootloader, see [the documentation](https://embassy.dev/book/dev/bootloader.html).
+For more details on the bootloader, see [the documentation](https://embassy.dev/book/#_bootloader).
 
 ## Hardware support
 

examples/stm32f4/src/bin/usb_ethernet.rs

@@ -43,7 +43,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {

examples/stm32f4/src/bin/usb_hid_keyboard.rs

@@ -24,7 +24,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32f4/src/bin/usb_hid_mouse.rs

@@ -21,7 +21,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32f4/src/bin/usb_raw.rs

@@ -72,7 +72,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32f4/src/bin/usb_serial.rs

@@ -19,7 +19,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32f7/src/bin/usb_serial.rs

@@ -19,7 +19,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32h7/src/bin/usb_serial.rs

@@ -18,7 +18,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {

examples/stm32l4/src/bin/usb_serial.rs

@@ -19,7 +19,7 @@ bind_interrupts!(struct Irqs {
 // If you are trying this and your USB device doesn't connect, the most
 // common issues are the RCC config and vbus_detection
 //
-// See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
+// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
 // for more information.
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {