diff --git a/README.md b/README.md
index fe8d5d93b..defea489f 100644
--- a/README.md
+++ b/README.md
@@ -21,27 +21,28 @@ TODO:
 - Setting a custom MAC address.
 - Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)
 
-## Running the example
+## Running the examples
 
 - `cargo install probe-rs-cli`
 - `cd examples/rpi-pico-w`
+### Example 1: Scan the wifi stations
+- `cargo run --release --bin wifi_scan`
+### Example 2: Create an access point (IP and credentials in the code)
+- `cargo run --release --bin tcp_server_ap`
+### Example 3: Connect to an existing network and create a server
 - `WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release`
 
 After a few seconds, you should see that DHCP picks up an IP address like this
-
 ```
 11.944489 DEBUG Acquired IP configuration:
 11.944517 DEBUG    IP address:      192.168.0.250/24
 11.944620 DEBUG    Default gateway: 192.168.0.33
 11.944722 DEBUG    DNS server 0:    192.168.0.33
 ```
-
-The example implements a TCP echo server on port 1234. You can try connecting to it with:
-
+This example implements a TCP echo server on port 1234. You can try connecting to it with:
 ```
 nc 192.168.0.250 1234
 ```
-
 Send it some data, you should see it echoed back and printed in the firmware's logs.
 
 ## License