add spi_dma rx-only test

tests/stm32/src/bin/spi_dma.rs

@@ -8,27 +8,33 @@ use defmt::assert_eq;
 use embassy_executor::Spawner;
 use embassy_stm32::spi::{self, Spi};
 use embassy_stm32::time::Hertz;
+use embassy_stm32::{into_ref, Peripheral as _};
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let p = embassy_stm32::init(config());
     info!("Hello World!");
 
-    let spi = peri!(p, SPI);
+    let spi_peri = peri!(p, SPI);
     let sck = peri!(p, SPI_SCK);
     let mosi = peri!(p, SPI_MOSI);
     let miso = peri!(p, SPI_MISO);
     let tx_dma = peri!(p, SPI_TX_DMA);
     let rx_dma = peri!(p, SPI_RX_DMA);
 
+    into_ref!(spi_peri, sck, mosi, miso, tx_dma, rx_dma);
+
     let mut spi_config = spi::Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
     let mut spi = Spi::new(
-        spi, sck,  // Arduino D13
+        spi_peri.reborrow(),
-        mosi, // Arduino D11
+        sck.reborrow(),  // Arduino D13
-        miso, // Arduino D12
+        mosi.reborrow(), // Arduino D11
-        tx_dma, rx_dma, spi_config,
+        miso.reborrow(), // Arduino D12
+        tx_dma.reborrow(),
+        rx_dma.reborrow(),
+        spi_config,
     );
 
     let data: [u8; 9] = [0x00, 0xFF, 0xAA, 0x55, 0xC0, 0xFF, 0xEE, 0xC0, 0xDE];
@@ -76,6 +82,55 @@ async fn main(_spawner: Spawner) {
     spi.blocking_read(&mut buf).unwrap();
     spi.write(&buf).await.unwrap();
 
+    core::mem::drop(spi);
+
+    // test rx-only configuration
+
+    // stm32f207zg - spi_v1
+    // stm32f103c8 - spi_f1
+    // stm32g491re - spi_v2
+    // stm32h753zi - spi_v3
+    // stm32h563zi - spi_v4
+    // stm32wba52cg - spi_v5
+
+    #[cfg(any(stm32f207zg, stm32f103c8, stm32g491re, stm32h753zi, stm32h563zi, stm32wba52cg))]
+    {
+        let mut spi = {
+            #[cfg(stm32f207zg, stm32f103c8, stm32g491re)]
+            {
+                Spi::new_rxonly(
+                    spi_peri.reborrow(),
+                    sck.reborrow(),
+                    miso.reborrow(),
+                    tx_dma.reborrow(),
+                    rx_dma.reborrow(),
+                    spi_config,
+                )
+            }
+            #[cfg(stm32h753zi, stm32h563zi, stm32wba52cg)]
+            {
+                Spi::new_rxonly(
+                    spi_peri.reborrow(),
+                    sck.reborrow(),
+                    miso.reborrow(),
+                    rx_dma.reborrow(),
+                    spi_config,
+                )
+            }
+        };
+
+        use embassy_stm32::gpio;
+        let mut mosi = gpio::Output::new(mosi.reborrow(), gpio::Level::Low, gpio::Speed::Low);
+
+        mosi.set_high();
+        spi.read(&mut buf).await.unwrap();
+        assert_eq!(buf, [0xff; 9]);
+
+        mosi.set_low();
+        spi.read(&mut buf).await.unwrap();
+        assert_eq!(buf, [0x00; 9]);
+    };
+
     info!("Test OK");
     cortex_m::asm::bkpt();
 }