nordic-dev.net/embassy
2
0
Fork 0
mirror of https://github.com/embassy-rs/embassy.git synced 2024-11-25 16:23:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

[UCPD] Disable dead-battery resistor for all families

Browse Source 
Using the code from PR #2683, thank you @ExplodingWaffle
Removes the dead-battery as selectable option because its unclear if
it can be re-enabled. Also there is no use case for it because the same
resistor can be configured with the sink option.
This commit is contained in:
Timo Kröger 2024-03-12 08:47:08 +01:00
parent eeb033caf0
commit 30cdc6c9c5
2 changed files with 47 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
embassy-stm32/src/lib.rs
View File

@ -283,9 +283,8 @@ pub fn init(config: Config) -> Peripherals {
}
unsafe {
// TODO: refactor into mod ucpd
#[cfg(ucpd)]
ucpd_init(
ucpd::init(
cs,
#[cfg(peri_ucpd1)]
config.enable_ucpd1_dead_battery,
@ -334,41 +333,3 @@ pub fn init(config: Config) -> Peripherals {
p
})
}
#[cfg(ucpd)]
/// Safety: must only be called when all UCPDs are disabled (e.g. at startup)
unsafe fn ucpd_init(
_cs: critical_section::CriticalSection,
#[cfg(peri_ucpd1)] ucpd1_db_enable: bool,
#[cfg(peri_ucpd2)] ucpd2_db_enable: bool,
) {
#[cfg(stm32g0x1)]
{
// according to RM0444 (STM32G0x1) section 8.1.1:
// when UCPD is disabled setting the strobe will disable dead battery
// (which is enabled after reset) but if UCPD is enabled, setting the
// strobe will apply the CC pin configuration from the control register
// (which is why we need to be careful about when we call this)
crate::pac::SYSCFG.cfgr1().modify(|w| {
w.set_ucpd1_strobe(ucpd1_db_enable);
w.set_ucpd2_strobe(ucpd2_db_enable);
});
}
#[cfg(any(stm32g4, stm32l5))]
{
crate::pac::PWR.cr3().modify(|w| {
#[cfg(stm32g4)]
w.set_ucpd1_dbdis(!ucpd1_db_enable);
#[cfg(stm32l5)]
w.set_ucpd_dbdis(!ucpd1_db_enable);
})
}
#[cfg(any(stm32h5, stm32u5))]
{
crate::pac::PWR.ucpdr().modify(|w| {
w.set_ucpd_dbdis(!ucpd1_db_enable);
})
}
}

58
embassy-stm32/src/ucpd.rs
View File

@ -28,6 +28,42 @@ use crate::pac::ucpd::vals::{Anamode, Ccenable, PscUsbpdclk, Txmode};
pub use crate::pac::ucpd::vals::{Phyccsel as CcSel, TypecVstateCc as CcVState};
use crate::rcc::RccPeripheral;
pub(crate) fn init(
_cs: critical_section::CriticalSection,
#[cfg(peri_ucpd1)] ucpd1_db_enable: bool,
#[cfg(peri_ucpd2)] ucpd2_db_enable: bool,
) {
#[cfg(stm32g0x1)]
{
// according to RM0444 (STM32G0x1) section 8.1.1:
// when UCPD is disabled setting the strobe will disable dead battery
// (which is enabled after reset) but if UCPD is enabled, setting the
// strobe will apply the CC pin configuration from the control register
// (which is why we need to be careful about when we call this)
crate::pac::SYSCFG.cfgr1().modify(|w| {
w.set_ucpd1_strobe(ucpd1_db_enable);
w.set_ucpd2_strobe(ucpd2_db_enable);
});
}
#[cfg(any(stm32g4, stm32l5))]
{
crate::pac::PWR.cr3().modify(|w| {
#[cfg(stm32g4)]
w.set_ucpd1_dbdis(!ucpd1_db_enable);
#[cfg(stm32l5)]
w.set_ucpd_dbdis(!ucpd1_db_enable);
})
}
#[cfg(any(stm32h5, stm32u5))]
{
crate::pac::PWR.ucpdr().modify(|w| {
w.set_ucpd_dbdis(!ucpd1_db_enable);
})
}
}
/// Pull-up or Pull-down resistor state of both CC lines.
#[derive(Debug, Clone, Copy, PartialEq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
@ -35,9 +71,6 @@ pub enum CcPull {
/// Analog PHY for CC pin disabled.
Disabled,
/// Rd=5.1k pull-down resistor enabled when the corresponding DBCC pin is high.
SinkDeadBattery,
/// Rd=5.1k pull-down resistor.
Sink,
@ -192,20 +225,21 @@ impl<'d, T: Instance> CcPhy<'d, T> {
CcPull::Source3_0A => 3,
_ => 0,
});
w.set_ccenable(if cc_pull != CcPull::SinkDeadBattery {
Ccenable::BOTH
} else {
w.set_ccenable(if cc_pull == CcPull::Disabled {
Ccenable::DISABLED
} else {
Ccenable::BOTH
});
});
// Disable dead-battery pull-down resistors which are enabled by default on boot.
critical_section::with(|_| {
// TODO: other families
#[cfg(stm32g4)]
crate::pac::PWR
.cr3()
.modify(|w| w.set_ucpd1_dbdis(cc_pull != CcPull::SinkDeadBattery));
critical_section::with(|cs| {
init(
cs,
false,
#[cfg(peri_ucpd2)]
false,
);
});
}