Merge pull request #2840 from MaxiluxSystems/feature/fdcan-runtime-cfg

stm32: can: fd: Properties for common runtime get/set operations

embassy-stm32/src/can/enums.rs

@@ -29,6 +29,24 @@ pub enum BusError {
     BusWarning,
 }
 
+/// Bus error modes.
+///
+/// Contrary to the `BusError` enum which also includes last-seen acute protocol
+/// errors, this enum includes only the mutually exclusive bus error modes.
+#[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum BusErrorMode {
+    /// Error active mode (default). Controller will transmit an active error
+    /// frame upon protocol error.
+    ErrorActive,
+    /// Error passive mode. An error counter exceeded 127. Controller will
+    /// transmit a passive error frame upon protocol error.
+    ErrorPassive,
+    /// Bus off mode. The transmit error counter exceeded 255. Controller is not
+    /// participating in bus traffic.
+    BusOff,
+}
+
 /// Frame Create Errors
 #[derive(Debug)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]

embassy-stm32/src/can/fdcan.rs

@@ -146,6 +146,7 @@ pub struct CanConfigurator<'d, T: Instance> {
     config: crate::can::fd::config::FdCanConfig,
     /// Reference to internals.
     instance: FdcanInstance<'d, T>,
+    properties: Properties<T>,
 }
 
 fn calc_ns_per_timer_tick<T: Instance>(mode: crate::can::fd::config::FrameTransmissionConfig) -> u64 {
@@ -199,9 +200,15 @@ impl<'d, T: Instance> CanConfigurator<'d, T> {
         Self {
             config,
             instance: FdcanInstance(peri),
+            properties: Properties::new(),
         }
     }
 
+    /// Get driver properties
+    pub fn properties(&self) -> &Properties<T> {
+        &self.properties
+    }
+
     /// Get configuration
     pub fn config(&self) -> crate::can::fd::config::FdCanConfig {
         return self.config;
@@ -240,32 +247,6 @@ impl<'d, T: Instance> CanConfigurator<'d, T> {
         self.config = self.config.set_data_bit_timing(nbtr);
     }
 
-    /// Set an Standard Address CAN filter into slot 'id'
-    #[inline]
-    pub fn set_standard_filter(&mut self, slot: StandardFilterSlot, filter: StandardFilter) {
-        T::registers().msg_ram_mut().filters.flssa[slot as usize].activate(filter);
-    }
-
-    /// Set an array of Standard Address CAN filters and overwrite the current set
-    pub fn set_standard_filters(&mut self, filters: &[StandardFilter; STANDARD_FILTER_MAX as usize]) {
-        for (i, f) in filters.iter().enumerate() {
-            T::registers().msg_ram_mut().filters.flssa[i].activate(*f);
-        }
-    }
-
-    /// Set an Extended Address CAN filter into slot 'id'
-    #[inline]
-    pub fn set_extended_filter(&mut self, slot: ExtendedFilterSlot, filter: ExtendedFilter) {
-        T::registers().msg_ram_mut().filters.flesa[slot as usize].activate(filter);
-    }
-
-    /// Set an array of Extended Address CAN filters and overwrite the current set
-    pub fn set_extended_filters(&mut self, filters: &[ExtendedFilter; EXTENDED_FILTER_MAX as usize]) {
-        for (i, f) in filters.iter().enumerate() {
-            T::registers().msg_ram_mut().filters.flesa[i].activate(*f);
-        }
-    }
-
     /// Start in mode.
     pub fn start(self, mode: OperatingMode) -> Can<'d, T> {
         let ns_per_timer_tick = calc_ns_per_timer_tick::<T>(self.config.frame_transmit);
@@ -277,6 +258,7 @@ impl<'d, T: Instance> CanConfigurator<'d, T> {
             config: self.config,
             instance: self.instance,
             _mode: mode,
+            properties: self.properties,
         };
         ret
     }
@@ -303,9 +285,15 @@ pub struct Can<'d, T: Instance> {
     /// Reference to internals.
     instance: FdcanInstance<'d, T>,
     _mode: OperatingMode,
+    properties: Properties<T>,
 }
 
 impl<'d, T: Instance> Can<'d, T> {
+    /// Get driver properties
+    pub fn properties(&self) -> &Properties<T> {
+        &self.properties
+    }
+
     /// Flush one of the TX mailboxes.
     pub async fn flush(&self, idx: usize) {
         poll_fn(|cx| {
@@ -350,8 +338,8 @@ impl<'d, T: Instance> Can<'d, T> {
         T::state().rx_mode.read_fd::<T>().await
     }
 
-    /// Split instance into separate Tx(write) and Rx(read) portions
-    pub fn split(self) -> (CanTx<'d, T>, CanRx<'d, T>) {
+    /// Split instance into separate portions: Tx(write), Rx(read), common properties
+    pub fn split(self) -> (CanTx<'d, T>, CanRx<'d, T>, Properties<T>) {
         (
             CanTx {
                 config: self.config,
@@ -363,6 +351,7 @@ impl<'d, T: Instance> Can<'d, T> {
                 _instance2: T::regs(),
                 _mode: self._mode,
             },
+            self.properties,
         )
     }
 
@@ -373,6 +362,7 @@ impl<'d, T: Instance> Can<'d, T> {
             //_instance2: T::regs(),
             instance: tx._instance,
             _mode: rx._mode,
+            properties: Properties::new(),
         }
     }
 
@@ -408,6 +398,7 @@ pub struct BufferedCan<'d, T: Instance, const TX_BUF_SIZE: usize, const RX_BUF_S
     _mode: OperatingMode,
     tx_buf: &'static TxBuf<TX_BUF_SIZE>,
     rx_buf: &'static RxBuf<RX_BUF_SIZE>,
+    properties: Properties<T>,
 }
 
 impl<'c, 'd, T: Instance, const TX_BUF_SIZE: usize, const RX_BUF_SIZE: usize>
@@ -426,10 +417,16 @@ impl<'c, 'd, T: Instance, const TX_BUF_SIZE: usize, const RX_BUF_SIZE: usize>
             _mode,
             tx_buf,
             rx_buf,
+            properties: Properties::new(),
         }
         .setup()
     }
 
+    /// Get driver properties
+    pub fn properties(&self) -> &Properties<T> {
+        &self.properties
+    }
+
     fn setup(self) -> Self {
         // We don't want interrupts being processed while we change modes.
         critical_section::with(|_| unsafe {
@@ -494,6 +491,7 @@ pub struct BufferedCanFd<'d, T: Instance, const TX_BUF_SIZE: usize, const RX_BUF
     _mode: OperatingMode,
     tx_buf: &'static TxFdBuf<TX_BUF_SIZE>,
     rx_buf: &'static RxFdBuf<RX_BUF_SIZE>,
+    properties: Properties<T>,
 }
 
 /// Sender that can be used for sending CAN frames.
@@ -542,10 +540,16 @@ impl<'c, 'd, T: Instance, const TX_BUF_SIZE: usize, const RX_BUF_SIZE: usize>
             _mode,
             tx_buf,
             rx_buf,
+            properties: Properties::new(),
         }
         .setup()
     }
 
+    /// Get driver properties
+    pub fn properties(&self) -> &Properties<T> {
+        &self.properties
+    }
+
     fn setup(self) -> Self {
         // We don't want interrupts being processed while we change modes.
         critical_section::with(|_| unsafe {
@@ -804,6 +808,71 @@ impl TxMode {
     }
 }
 
+/// Common driver properties, including filters and error counters
+pub struct Properties<T> {
+    // phantom pointer to ensure !Sync
+    instance: PhantomData<*const T>,
+}
+
+impl<T: Instance> Properties<T> {
+    fn new() -> Self {
+        Self {
+            instance: Default::default(),
+        }
+    }
+
+    /// Set a standard address CAN filter in the specified slot in FDCAN memory.
+    #[inline]
+    pub fn set_standard_filter(&self, slot: StandardFilterSlot, filter: StandardFilter) {
+        T::registers().msg_ram_mut().filters.flssa[slot as usize].activate(filter);
+    }
+
+    /// Set the full array of standard address CAN filters in FDCAN memory.
+    /// Overwrites all standard address filters in memory.
+    pub fn set_standard_filters(&self, filters: &[StandardFilter; STANDARD_FILTER_MAX as usize]) {
+        for (i, f) in filters.iter().enumerate() {
+            T::registers().msg_ram_mut().filters.flssa[i].activate(*f);
+        }
+    }
+
+    /// Set an extended address CAN filter in the specified slot in FDCAN memory.
+    #[inline]
+    pub fn set_extended_filter(&self, slot: ExtendedFilterSlot, filter: ExtendedFilter) {
+        T::registers().msg_ram_mut().filters.flesa[slot as usize].activate(filter);
+    }
+
+    /// Set the full array of extended address CAN filters in FDCAN memory.
+    /// Overwrites all extended address filters in memory.
+    pub fn set_extended_filters(&self, filters: &[ExtendedFilter; EXTENDED_FILTER_MAX as usize]) {
+        for (i, f) in filters.iter().enumerate() {
+            T::registers().msg_ram_mut().filters.flesa[i].activate(*f);
+        }
+    }
+
+    /// Get the CAN RX error counter
+    pub fn rx_error_count(&self) -> u8 {
+        T::regs().ecr().read().rec()
+    }
+
+    /// Get the CAN TX error counter
+    pub fn tx_error_count(&self) -> u8 {
+        T::regs().ecr().read().tec()
+    }
+
+    /// Get the current bus error mode
+    pub fn bus_error_mode(&self) -> BusErrorMode {
+        // This read will clear LEC and DLEC. This is not ideal, but protocol
+        // error reporting in this driver should have a big ol' FIXME on it
+        // anyway!
+        let psr = T::regs().psr().read();
+        match (psr.bo(), psr.ep()) {
+            (false, false) => BusErrorMode::ErrorActive,
+            (false, true) => BusErrorMode::ErrorPassive,
+            (true, _) => BusErrorMode::BusOff,
+        }
+    }
+}
+
 struct State {
     pub rx_mode: RxMode,
     pub tx_mode: TxMode,

examples/stm32g4/src/bin/can.rs

@@ -38,7 +38,7 @@ async fn main(_spawner: Spawner) {
 
     let mut can = can::CanConfigurator::new(peripherals.FDCAN1, peripherals.PA11, peripherals.PA12, Irqs);
 
-    can.set_extended_filter(
+    can.properties().set_extended_filter(
         can::filter::ExtendedFilterSlot::_0,
         can::filter::ExtendedFilter::accept_all_into_fifo1(),
     );
@@ -128,7 +128,7 @@ async fn main(_spawner: Spawner) {
         }
     }
     i = 0;
-    let (mut tx, mut rx) = can.split();
+    let (mut tx, mut rx, _props) = can.split();
     // With split
     loop {
         let frame = can::frame::Frame::new_extended(0x123456F, &[i; 8]).unwrap();

examples/stm32h5/src/bin/can.rs

@@ -67,7 +67,7 @@ async fn main(_spawner: Spawner) {
         }
     }
 
-    let (mut tx, mut rx) = can.split();
+    let (mut tx, mut rx, _props) = can.split();
     // With split
     loop {
         let frame = can::frame::Frame::new_extended(0x123456F, &[i; 8]).unwrap();

examples/stm32h7/src/bin/can.rs

@@ -67,7 +67,7 @@ async fn main(_spawner: Spawner) {
         }
     }
 
-    let (mut tx, mut rx) = can.split();
+    let (mut tx, mut rx, _props) = can.split();
     // With split
     loop {
         let frame = can::frame::Frame::new_extended(0x123456F, &[i; 8]).unwrap();

tests/stm32/Cargo.toml

@@ -15,7 +15,7 @@ stm32f446re = ["embassy-stm32/stm32f446re", "chrono", "stop", "can", "not-gpdma"
 stm32f767zi = ["embassy-stm32/stm32f767zi", "chrono", "not-gpdma", "eth", "rng"]
 stm32g071rb = ["embassy-stm32/stm32g071rb", "cm0", "not-gpdma", "dac", "ucpd"]
 stm32g491re = ["embassy-stm32/stm32g491re", "chrono", "stop", "not-gpdma", "rng", "fdcan", "cordic"]
-stm32h563zi = ["embassy-stm32/stm32h563zi", "chrono", "eth", "rng", "hash", "cordic"]
+stm32h563zi = ["embassy-stm32/stm32h563zi", "chrono", "eth", "rng", "fdcan", "hash", "cordic"]
 stm32h753zi = ["embassy-stm32/stm32h753zi", "chrono", "not-gpdma", "eth", "rng", "fdcan", "hash", "cryp"]
 stm32h755zi = ["embassy-stm32/stm32h755zi-cm7", "chrono", "not-gpdma", "eth", "dac", "rng", "fdcan", "hash", "cryp"]
 stm32h7a3zi = ["embassy-stm32/stm32h7a3zi", "not-gpdma", "rng", "fdcan"]

tests/stm32/src/bin/fdcan.rs

@@ -24,7 +24,19 @@ bind_interrupts!(struct Irqs1 {
     FDCAN1_IT1 => can::IT1InterruptHandler<FDCAN1>;
 });
 
-#[cfg(any(feature = "stm32h755zi", feature = "stm32h753zi", feature = "stm32h563zi"))]
+#[cfg(feature = "stm32h563zi")]
+fn options() -> (Config, TestOptions) {
+    info!("H563 config");
+    (
+        config(),
+        TestOptions {
+            max_latency: Duration::from_micros(1200),
+            max_buffered: 3,
+        },
+    )
+}
+
+#[cfg(any(feature = "stm32h755zi", feature = "stm32h753zi"))]
 fn options() -> (Config, TestOptions) {
     use embassy_stm32::rcc;
     info!("H75 config");
@@ -88,11 +100,11 @@ async fn main(_spawner: Spawner) {
     can.set_bitrate(250_000);
     can2.set_bitrate(250_000);
 
-    can.set_extended_filter(
+    can.properties().set_extended_filter(
         can::filter::ExtendedFilterSlot::_0,
         can::filter::ExtendedFilter::accept_all_into_fifo1(),
     );
-    can2.set_extended_filter(
+    can2.properties().set_extended_filter(
         can::filter::ExtendedFilterSlot::_0,
         can::filter::ExtendedFilter::accept_all_into_fifo1(),
     );
@@ -106,8 +118,8 @@ async fn main(_spawner: Spawner) {
     info!("CAN Configured");
 
     // Test again with a split
-    let (mut tx, mut rx) = can.split();
-    let (mut tx2, mut rx2) = can2.split();
+    let (mut tx, mut rx, _props) = can.split();
+    let (mut tx2, mut rx2, _props) = can2.split();
     run_split_can_tests(&mut tx, &mut rx, &options).await;
     run_split_can_tests(&mut tx2, &mut rx2, &options).await;