Merge pull request #1158 from embassy-rs/stm32c0

Add STM32C0 support.

ci.sh

@@ -76,7 +76,7 @@ cargo batch  \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f217zg,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv8m.main-none-eabihf --features nightly,stm32l552ze,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv6m-none-eabi --features nightly,stm32wl54jc-cm0p,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wle5ub,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features nightly,stm32wle5jb,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f107vc,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f103re,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f100c4,defmt,exti,time-driver-any,unstable-traits \
@@ -98,6 +98,7 @@ cargo batch  \
     --- build --release --manifest-path examples/stm32f3/Cargo.toml --target thumbv7em-none-eabihf --out-dir out/examples/stm32f3 \
     --- build --release --manifest-path examples/stm32f4/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32f4 \
     --- build --release --manifest-path examples/stm32f7/Cargo.toml --target thumbv7em-none-eabihf --out-dir out/examples/stm32f7 \
+    --- build --release --manifest-path examples/stm32c0/Cargo.toml --target thumbv6m-none-eabi --out-dir out/examples/stm32c0 \
     --- build --release --manifest-path examples/stm32g0/Cargo.toml --target thumbv6m-none-eabi --out-dir out/examples/stm32g0 \
     --- build --release --manifest-path examples/stm32g4/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32g4 \
     --- build --release --manifest-path examples/stm32h7/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32h7 \

ci_stable.sh

@@ -36,7 +36,7 @@ cargo batch  \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32g491re,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u585zi,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wb55vy,defmt,exti,time-driver-any,unstable-traits \
-    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wl55uc-cm4,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wl55cc-cm4,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4r9zi,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f303vc,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f411ce,defmt,time-driver-any \

embassy-stm32/Cargo.toml

@@ -19,6 +19,7 @@ flavors = [
     { regex_feature = "stm32f3.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32f42.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32f7.*", target = "thumbv7em-none-eabi" },
+    { regex_feature = "stm32c0.*", target = "thumbv6m-none-eabi" },
     { regex_feature = "stm32g0.*", target = "thumbv6m-none-eabi" },
     { regex_feature = "stm32g4.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32h7.*", target = "thumbv7em-none-eabi" },
@@ -110,6 +111,19 @@ unstable-traits = ["embedded-hal-1", "dep:embedded-hal-nb"]
 
 # BEGIN GENERATED FEATURES
 # Generated by stm32-gen-features. DO NOT EDIT.
+stm32c011d6 = [ "stm32-metapac/stm32c011d6" ]
+stm32c011f4 = [ "stm32-metapac/stm32c011f4" ]
+stm32c011f6 = [ "stm32-metapac/stm32c011f6" ]
+stm32c011j4 = [ "stm32-metapac/stm32c011j4" ]
+stm32c011j6 = [ "stm32-metapac/stm32c011j6" ]
+stm32c031c4 = [ "stm32-metapac/stm32c031c4" ]
+stm32c031c6 = [ "stm32-metapac/stm32c031c6" ]
+stm32c031f4 = [ "stm32-metapac/stm32c031f4" ]
+stm32c031f6 = [ "stm32-metapac/stm32c031f6" ]
+stm32c031g4 = [ "stm32-metapac/stm32c031g4" ]
+stm32c031g6 = [ "stm32-metapac/stm32c031g6" ]
+stm32c031k4 = [ "stm32-metapac/stm32c031k4" ]
+stm32c031k6 = [ "stm32-metapac/stm32c031k6" ]
 stm32f030c6 = [ "stm32-metapac/stm32f030c6" ]
 stm32f030c8 = [ "stm32-metapac/stm32f030c8" ]
 stm32f030cc = [ "stm32-metapac/stm32f030cc" ]
@@ -1318,11 +1332,9 @@ stm32u575zi = [ "stm32-metapac/stm32u575zi" ]
 stm32u585ai = [ "stm32-metapac/stm32u585ai" ]
 stm32u585ci = [ "stm32-metapac/stm32u585ci" ]
 stm32u585oi = [ "stm32-metapac/stm32u585oi" ]
-stm32u585qe = [ "stm32-metapac/stm32u585qe" ]
 stm32u585qi = [ "stm32-metapac/stm32u585qi" ]
 stm32u585ri = [ "stm32-metapac/stm32u585ri" ]
 stm32u585vi = [ "stm32-metapac/stm32u585vi" ]
-stm32u585ze = [ "stm32-metapac/stm32u585ze" ]
 stm32u585zi = [ "stm32-metapac/stm32u585zi" ]
 stm32wb10cc = [ "stm32-metapac/stm32wb10cc" ]
 stm32wb15cc = [ "stm32-metapac/stm32wb15cc" ]
@@ -1340,7 +1352,6 @@ stm32wb55vc = [ "stm32-metapac/stm32wb55vc" ]
 stm32wb55ve = [ "stm32-metapac/stm32wb55ve" ]
 stm32wb55vg = [ "stm32-metapac/stm32wb55vg" ]
 stm32wb55vy = [ "stm32-metapac/stm32wb55vy" ]
-stm32wb5mmg = [ "stm32-metapac/stm32wb5mmg" ]
 stm32wl54cc-cm4 = [ "stm32-metapac/stm32wl54cc-cm4" ]
 stm32wl54cc-cm0p = [ "stm32-metapac/stm32wl54cc-cm0p" ]
 stm32wl54jc-cm4 = [ "stm32-metapac/stm32wl54jc-cm4" ]
@@ -1349,8 +1360,6 @@ stm32wl55cc-cm4 = [ "stm32-metapac/stm32wl55cc-cm4" ]
 stm32wl55cc-cm0p = [ "stm32-metapac/stm32wl55cc-cm0p" ]
 stm32wl55jc-cm4 = [ "stm32-metapac/stm32wl55jc-cm4" ]
 stm32wl55jc-cm0p = [ "stm32-metapac/stm32wl55jc-cm0p" ]
-stm32wl55uc-cm4 = [ "stm32-metapac/stm32wl55uc-cm4" ]
-stm32wl55uc-cm0p = [ "stm32-metapac/stm32wl55uc-cm0p" ]
 stm32wle4c8 = [ "stm32-metapac/stm32wle4c8" ]
 stm32wle4cb = [ "stm32-metapac/stm32wle4cb" ]
 stm32wle4cc = [ "stm32-metapac/stm32wle4cc" ]
@@ -1363,6 +1372,4 @@ stm32wle5cc = [ "stm32-metapac/stm32wle5cc" ]
 stm32wle5j8 = [ "stm32-metapac/stm32wle5j8" ]
 stm32wle5jb = [ "stm32-metapac/stm32wle5jb" ]
 stm32wle5jc = [ "stm32-metapac/stm32wle5jc" ]
-stm32wle5u8 = [ "stm32-metapac/stm32wle5u8" ]
-stm32wle5ub = [ "stm32-metapac/stm32wle5ub" ]
 # END GENERATED FEATURES

embassy-stm32/src/exti.rs

@@ -25,11 +25,11 @@ fn cpu_regs() -> pac::exti::Exti {
     EXTI
 }
 
-#[cfg(not(any(exti_g0, exti_l5, gpio_v1, exti_u5)))]
+#[cfg(not(any(exti_c0, exti_g0, exti_l5, gpio_v1, exti_u5)))]
 fn exticr_regs() -> pac::syscfg::Syscfg {
     pac::SYSCFG
 }
-#[cfg(any(exti_g0, exti_l5, exti_u5))]
+#[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
 fn exticr_regs() -> pac::exti::Exti {
     EXTI
 }
@@ -39,9 +39,9 @@ fn exticr_regs() -> pac::afio::Afio {
 }
 
 pub unsafe fn on_irq() {
-    #[cfg(not(any(exti_g0, exti_l5, exti_u5)))]
+    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
     let bits = EXTI.pr(0).read().0;
-    #[cfg(any(exti_g0, exti_l5, exti_u5))]
+    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
     let bits = EXTI.rpr(0).read().0 | EXTI.fpr(0).read().0;
 
     // Mask all the channels that fired.
@@ -53,9 +53,9 @@ pub unsafe fn on_irq() {
     }
 
     // Clear pending
-    #[cfg(not(any(exti_g0, exti_l5, exti_u5)))]
+    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
     EXTI.pr(0).write_value(Lines(bits));
-    #[cfg(any(exti_g0, exti_l5, exti_u5))]
+    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
     {
         EXTI.rpr(0).write_value(Lines(bits));
         EXTI.fpr(0).write_value(Lines(bits));
@@ -212,9 +212,9 @@ impl<'a> ExtiInputFuture<'a> {
             EXTI.ftsr(0).modify(|w| w.set_line(pin, falling));
 
             // clear pending bit
-            #[cfg(not(any(exti_g0, exti_l5, exti_u5)))]
+            #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
             EXTI.pr(0).write(|w| w.set_line(pin, true));
-            #[cfg(any(exti_g0, exti_l5, exti_u5))]
+            #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
             {
                 EXTI.rpr(0).write(|w| w.set_line(pin, true));
                 EXTI.fpr(0).write(|w| w.set_line(pin, true));

embassy-stm32/src/lib.rs

@@ -121,7 +121,7 @@ pub fn init(config: Config) -> Peripherals {
         #[cfg(dbgmcu)]
         if config.enable_debug_during_sleep {
             crate::pac::DBGMCU.cr().modify(|cr| {
-                #[cfg(any(dbgmcu_f0, dbgmcu_g0, dbgmcu_u5))]
+                #[cfg(any(dbgmcu_f0, dbgmcu_c0, dbgmcu_g0, dbgmcu_u5))]
                 {
                     cr.set_dbg_stop(true);
                     cr.set_dbg_standby(true);

embassy-stm32/src/rcc/c0.rs

@@ -0,0 +1,233 @@
+use crate::pac::flash::vals::Latency;
+use crate::pac::rcc::vals::{Hpre, Hsidiv, Ppre, Sw};
+use crate::pac::{FLASH, RCC};
+use crate::rcc::{set_freqs, Clocks};
+use crate::time::Hertz;
+
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(48_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
+
+/// System clock mux source
+#[derive(Clone, Copy)]
+pub enum ClockSrc {
+    HSE(Hertz),
+    HSI(HSIPrescaler),
+    LSI,
+}
+
+#[derive(Clone, Copy)]
+pub enum HSIPrescaler {
+    NotDivided,
+    Div2,
+    Div4,
+    Div8,
+    Div16,
+    Div32,
+    Div64,
+    Div128,
+}
+
+impl Into<Hsidiv> for HSIPrescaler {
+    fn into(self) -> Hsidiv {
+        match self {
+            HSIPrescaler::NotDivided => Hsidiv::DIV1,
+            HSIPrescaler::Div2 => Hsidiv::DIV2,
+            HSIPrescaler::Div4 => Hsidiv::DIV4,
+            HSIPrescaler::Div8 => Hsidiv::DIV8,
+            HSIPrescaler::Div16 => Hsidiv::DIV16,
+            HSIPrescaler::Div32 => Hsidiv::DIV32,
+            HSIPrescaler::Div64 => Hsidiv::DIV64,
+            HSIPrescaler::Div128 => Hsidiv::DIV128,
+        }
+    }
+}
+
+/// AHB prescaler
+#[derive(Clone, Copy, PartialEq)]
+pub enum AHBPrescaler {
+    NotDivided,
+    Div2,
+    Div4,
+    Div8,
+    Div16,
+    Div64,
+    Div128,
+    Div256,
+    Div512,
+}
+
+/// APB prescaler
+#[derive(Clone, Copy)]
+pub enum APBPrescaler {
+    NotDivided,
+    Div2,
+    Div4,
+    Div8,
+    Div16,
+}
+
+impl Into<Ppre> for APBPrescaler {
+    fn into(self) -> Ppre {
+        match self {
+            APBPrescaler::NotDivided => Ppre::DIV1,
+            APBPrescaler::Div2 => Ppre::DIV2,
+            APBPrescaler::Div4 => Ppre::DIV4,
+            APBPrescaler::Div8 => Ppre::DIV8,
+            APBPrescaler::Div16 => Ppre::DIV16,
+        }
+    }
+}
+
+impl Into<Hpre> for AHBPrescaler {
+    fn into(self) -> Hpre {
+        match self {
+            AHBPrescaler::NotDivided => Hpre::DIV1,
+            AHBPrescaler::Div2 => Hpre::DIV2,
+            AHBPrescaler::Div4 => Hpre::DIV4,
+            AHBPrescaler::Div8 => Hpre::DIV8,
+            AHBPrescaler::Div16 => Hpre::DIV16,
+            AHBPrescaler::Div64 => Hpre::DIV64,
+            AHBPrescaler::Div128 => Hpre::DIV128,
+            AHBPrescaler::Div256 => Hpre::DIV256,
+            AHBPrescaler::Div512 => Hpre::DIV512,
+        }
+    }
+}
+
+/// Clocks configutation
+pub struct Config {
+    pub mux: ClockSrc,
+    pub ahb_pre: AHBPrescaler,
+    pub apb_pre: APBPrescaler,
+}
+
+impl Default for Config {
+    #[inline]
+    fn default() -> Config {
+        Config {
+            mux: ClockSrc::HSI(HSIPrescaler::NotDivided),
+            ahb_pre: AHBPrescaler::NotDivided,
+            apb_pre: APBPrescaler::NotDivided,
+        }
+    }
+}
+
+pub(crate) unsafe fn init(config: Config) {
+    let (sys_clk, sw) = match config.mux {
+        ClockSrc::HSI(div) => {
+            // Enable HSI
+            let div: Hsidiv = div.into();
+            RCC.cr().write(|w| {
+                w.set_hsidiv(div);
+                w.set_hsion(true)
+            });
+            while !RCC.cr().read().hsirdy() {}
+
+            (HSI_FREQ.0 >> div.0, Sw::HSI)
+        }
+        ClockSrc::HSE(freq) => {
+            // Enable HSE
+            RCC.cr().write(|w| w.set_hseon(true));
+            while !RCC.cr().read().hserdy() {}
+
+            (freq.0, Sw::HSE)
+        }
+        ClockSrc::LSI => {
+            // Enable LSI
+            RCC.csr2().write(|w| w.set_lsion(true));
+            while !RCC.csr2().read().lsirdy() {}
+            (LSI_FREQ.0, Sw::LSI)
+        }
+    };
+
+    // Determine the flash latency implied by the target clock speed
+    // RM0454 § 3.3.4:
+    let target_flash_latency = if sys_clk <= 24_000_000 {
+        Latency::WS0
+    } else {
+        Latency::WS1
+    };
+
+    // Increase the number of cycles we wait for flash if the new value is higher
+    // There's no harm in waiting a little too much before the clock change, but we'll
+    // crash immediately if we don't wait enough after the clock change
+    let mut set_flash_latency_after = false;
+    FLASH.acr().modify(|w| {
+        // Is the current flash latency less than what we need at the new SYSCLK?
+        if w.latency().0 <= target_flash_latency.0 {
+            // We must increase the number of wait states now
+            w.set_latency(target_flash_latency)
+        } else {
+            // We may decrease the number of wait states later
+            set_flash_latency_after = true;
+        }
+
+        // RM0490 § 3.3.4:
+        // > Prefetch is enabled by setting the PRFTEN bit of the FLASH access control register
+        // > (FLASH_ACR). This feature is useful if at least one wait state is needed to access the
+        // > Flash memory.
+        //
+        // Enable flash prefetching if we have at least one wait state, and disable it otherwise.
+        w.set_prften(target_flash_latency.0 > 0);
+    });
+
+    if !set_flash_latency_after {
+        // Spin until the effective flash latency is compatible with the clock change
+        while FLASH.acr().read().latency().0 < target_flash_latency.0 {}
+    }
+
+    // Configure SYSCLK source, HCLK divisor, and PCLK divisor all at once
+    let (sw, hpre, ppre) = (sw.into(), config.ahb_pre.into(), config.apb_pre.into());
+    RCC.cfgr().modify(|w| {
+        w.set_sw(sw);
+        w.set_hpre(hpre);
+        w.set_ppre(ppre);
+    });
+
+    if set_flash_latency_after {
+        // We can make the flash require fewer wait states
+        // Spin until the SYSCLK changes have taken effect
+        loop {
+            let cfgr = RCC.cfgr().read();
+            if cfgr.sw() == sw && cfgr.hpre() == hpre && cfgr.ppre() == ppre {
+                break;
+            }
+        }
+
+        // Set the flash latency to require fewer wait states
+        FLASH.acr().modify(|w| w.set_latency(target_flash_latency));
+    }
+
+    let ahb_div = match config.ahb_pre {
+        AHBPrescaler::NotDivided => 1,
+        AHBPrescaler::Div2 => 2,
+        AHBPrescaler::Div4 => 4,
+        AHBPrescaler::Div8 => 8,
+        AHBPrescaler::Div16 => 16,
+        AHBPrescaler::Div64 => 64,
+        AHBPrescaler::Div128 => 128,
+        AHBPrescaler::Div256 => 256,
+        AHBPrescaler::Div512 => 512,
+    };
+    let ahb_freq = sys_clk / ahb_div;
+
+    let (apb_freq, apb_tim_freq) = match config.apb_pre {
+        APBPrescaler::NotDivided => (ahb_freq, ahb_freq),
+        pre => {
+            let pre: Ppre = pre.into();
+            let pre: u8 = 1 << (pre.0 - 3);
+            let freq = ahb_freq / pre as u32;
+            (freq, freq * 2)
+        }
+    };
+
+    set_freqs(Clocks {
+        sys: Hertz(sys_clk),
+        ahb1: Hertz(ahb_freq),
+        apb1: Hertz(apb_freq),
+        apb1_tim: Hertz(apb_tim_freq),
+    });
+}

embassy-stm32/src/rcc/mod.rs

@@ -10,6 +10,7 @@ use crate::time::Hertz;
 #[cfg_attr(rcc_f3, path = "f3.rs")]
 #[cfg_attr(any(rcc_f4, rcc_f410), path = "f4.rs")]
 #[cfg_attr(rcc_f7, path = "f7.rs")]
+#[cfg_attr(rcc_c0, path = "c0.rs")]
 #[cfg_attr(rcc_g0, path = "g0.rs")]
 #[cfg_attr(rcc_g4, path = "g4.rs")]
 #[cfg_attr(any(rcc_h7, rcc_h7ab), path = "h7.rs")]
@@ -30,9 +31,9 @@ pub struct Clocks {
     // APB
     pub apb1: Hertz,
     pub apb1_tim: Hertz,
-    #[cfg(not(rcc_g0))]
+    #[cfg(not(any(rcc_c0, rcc_g0)))]
     pub apb2: Hertz,
-    #[cfg(not(rcc_g0))]
+    #[cfg(not(any(rcc_c0, rcc_g0)))]
     pub apb2_tim: Hertz,
     #[cfg(any(rcc_wl5, rcc_wle, rcc_u5))]
     pub apb3: Hertz,

examples/stm32c0/.cargo/config.toml

@@ -0,0 +1,9 @@
+[target.'cfg(all(target_arch = "arm", target_os = "none"))']
+# replace STM32G071C8Rx with your chip as listed in `probe-run --list-chips`
+runner = "probe-rs-cli run --speed 100 --chip STM32c031c6tx"
+
+[build]
+target = "thumbv6m-none-eabi"
+
+[env]
+DEFMT_LOG = "trace"

examples/stm32c0/Cargo.toml

@@ -0,0 +1,21 @@
+[package]
+edition = "2021"
+name = "embassy-stm32c0-examples"
+version = "0.1.0"
+license = "MIT OR Apache-2.0"
+
+[dependencies]
+embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] }
+embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] }
+embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
+embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "time-driver-any", "stm32c031c6", "memory-x", "unstable-pac", "exti"]  }
+
+defmt = "0.3"
+defmt-rtt = "0.4"
+
+cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
+cortex-m-rt = "0.7.0"
+embedded-hal = "0.2.6"
+panic-probe = { version = "0.3", features = ["print-defmt"] }
+futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
+heapless = { version = "0.7.5", default-features = false }

examples/stm32c0/build.rs

@@ -0,0 +1,5 @@
+fn main() {
+    println!("cargo:rustc-link-arg-bins=--nmagic");
+    println!("cargo:rustc-link-arg-bins=-Tlink.x");
+    println!("cargo:rustc-link-arg-bins=-Tdefmt.x");
+}

examples/stm32c0/src/bin/blinky.rs

@@ -0,0 +1,27 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::gpio::{Level, Output, Speed};
+use embassy_time::{Duration, Timer};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let mut led = Output::new(p.PA5, Level::High, Speed::Low);
+
+    loop {
+        info!("high");
+        led.set_high();
+        Timer::after(Duration::from_millis(300)).await;
+
+        info!("low");
+        led.set_low();
+        Timer::after(Duration::from_millis(300)).await;
+    }
+}

examples/stm32c0/src/bin/button.rs

@@ -0,0 +1,25 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use cortex_m_rt::entry;
+use defmt::*;
+use embassy_stm32::gpio::{Input, Pull};
+use {defmt_rtt as _, panic_probe as _};
+
+#[entry]
+fn main() -> ! {
+    info!("Hello World!");
+
+    let p = embassy_stm32::init(Default::default());
+
+    let button = Input::new(p.PC13, Pull::Up);
+
+    loop {
+        if button.is_high() {
+            info!("high");
+        } else {
+            info!("low");
+        }
+    }
+}

examples/stm32c0/src/bin/button_exti.rs

@@ -0,0 +1,27 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::exti::ExtiInput;
+use embassy_stm32::gpio::{Input, Pull};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let button = Input::new(p.PC13, Pull::Up);
+    let mut button = ExtiInput::new(button, p.EXTI13);
+
+    info!("Press the USER button...");
+
+    loop {
+        button.wait_for_falling_edge().await;
+        info!("Pressed!");
+        button.wait_for_rising_edge().await;
+        info!("Released!");
+    }
+}

stm32-data

@@ -1 +1 @@
-Subproject commit 844793fc3da2ba3f12ab6a69b78cd8e6fb5497b4
+Subproject commit 96decdd6114d78813c1f748fb878a45e1b03bf73

stm32-metapac-gen/Cargo.toml

@@ -7,7 +7,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 regex = "1.5.4"
-chiptool = { git = "https://github.com/embassy-rs/chiptool", rev = "28ffa8a19d84914089547f52900ffb5877a5dc23" }
+chiptool = { git = "https://github.com/embassy-rs/chiptool", rev = "1d9e0a39a6acc291e50cabc4ed617a87f06d5e89" }
 serde = { version = "1.0.130", features = [ "derive" ] }
 serde_json = "1.0.87"
 serde_yaml = "0.8.21"

stm32-metapac/Cargo.toml

@@ -27,6 +27,7 @@ flavors = [
     { regex_feature = "stm32f3.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32f4.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32f7.*", target = "thumbv7em-none-eabi" },
+    { regex_feature = "stm32c0.*", target = "thumbv6m-none-eabi" },
     { regex_feature = "stm32g0.*", target = "thumbv6m-none-eabi" },
     { regex_feature = "stm32g4.*", target = "thumbv7em-none-eabi" },
     { regex_feature = "stm32h7.*", target = "thumbv7em-none-eabi" },
@@ -67,6 +68,19 @@ memory-x = []
 
 # BEGIN GENERATED FEATURES
 # Generated by stm32-gen-features. DO NOT EDIT.
+stm32c011d6 = []
+stm32c011f4 = []
+stm32c011f6 = []
+stm32c011j4 = []
+stm32c011j6 = []
+stm32c031c4 = []
+stm32c031c6 = []
+stm32c031f4 = []
+stm32c031f6 = []
+stm32c031g4 = []
+stm32c031g6 = []
+stm32c031k4 = []
+stm32c031k6 = []
 stm32f030c6 = []
 stm32f030c8 = []
 stm32f030cc = []
@@ -1275,11 +1289,9 @@ stm32u575zi = []
 stm32u585ai = []
 stm32u585ci = []
 stm32u585oi = []
-stm32u585qe = []
 stm32u585qi = []
 stm32u585ri = []
 stm32u585vi = []
-stm32u585ze = []
 stm32u585zi = []
 stm32wb10cc = []
 stm32wb15cc = []
@@ -1297,7 +1309,6 @@ stm32wb55vc = []
 stm32wb55ve = []
 stm32wb55vg = []
 stm32wb55vy = []
-stm32wb5mmg = []
 stm32wl54cc-cm4 = []
 stm32wl54cc-cm0p = []
 stm32wl54jc-cm4 = []
@@ -1306,8 +1317,6 @@ stm32wl55cc-cm4 = []
 stm32wl55cc-cm0p = []
 stm32wl55jc-cm4 = []
 stm32wl55jc-cm0p = []
-stm32wl55uc-cm4 = []
-stm32wl55uc-cm0p = []
 stm32wle4c8 = []
 stm32wle4cb = []
 stm32wle4cc = []
@@ -1320,6 +1329,4 @@ stm32wle5cc = []
 stm32wle5j8 = []
 stm32wle5jb = []
 stm32wle5jc = []
-stm32wle5u8 = []
-stm32wle5ub = []
 # END GENERATED FEATURES