diff --git a/embassy-rp/src/flash.rs b/embassy-rp/src/flash.rs
index a68493932..5f7922f8e 100644
--- a/embassy-rp/src/flash.rs
+++ b/embassy-rp/src/flash.rs
@@ -510,11 +510,19 @@ mod ram_helpers {
     ///
     /// `addr` and `len` parameters must be valid and are not checked.
     pub unsafe fn flash_range_erase(addr: u32, len: u32) {
+        #[cfg(feature = "rp2040")]
         let mut boot2 = [0u32; 256 / 4];
-        let ptrs = if USE_BOOT2 {
-            rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
-            flash_function_pointers_with_boot2(true, false, &boot2)
-        } else {
+        let ptrs = {
+            #[cfg(feature = "rp2040")]
+            {
+                if USE_BOOT2 {
+                    rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
+                    flash_function_pointers_with_boot2(true, false, &boot2)
+                } else {
+                    flash_function_pointers(true, false)
+                }
+            }
+            #[cfg(feature = "_rp235x")]
             flash_function_pointers(true, false)
         };
 
@@ -540,11 +548,19 @@ mod ram_helpers {
     ///
     /// `addr` and `len` parameters must be valid and are not checked.
     pub unsafe fn flash_range_erase_and_program(addr: u32, data: &[u8]) {
+        #[cfg(feature = "rp2040")]
         let mut boot2 = [0u32; 256 / 4];
-        let ptrs = if USE_BOOT2 {
-            rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
-            flash_function_pointers_with_boot2(true, true, &boot2)
-        } else {
+        let ptrs = {
+            #[cfg(feature = "rp2040")]
+            {
+                if USE_BOOT2 {
+                    rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
+                    flash_function_pointers_with_boot2(true, true, &boot2)
+                } else {
+                    flash_function_pointers(true, true)
+                }
+            }
+            #[cfg(feature = "_rp235x")]
             flash_function_pointers(true, true)
         };
 
@@ -575,11 +591,19 @@ mod ram_helpers {
     ///
     /// `addr` and `len` parameters must be valid and are not checked.
     pub unsafe fn flash_range_program(addr: u32, data: &[u8]) {
+        #[cfg(feature = "rp2040")]
         let mut boot2 = [0u32; 256 / 4];
-        let ptrs = if USE_BOOT2 {
-            rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
-            flash_function_pointers_with_boot2(false, true, &boot2)
-        } else {
+        let ptrs = {
+            #[cfg(feature = "rp2040")]
+            {
+                if USE_BOOT2 {
+                    rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
+                    flash_function_pointers_with_boot2(false, true, &boot2)
+                } else {
+                    flash_function_pointers(false, true)
+                }
+            }
+            #[cfg(feature = "_rp235x")]
             flash_function_pointers(false, true)
         };
 
@@ -708,13 +732,22 @@ mod ram_helpers {
     ///
     /// Credit: taken from `rp2040-flash` (also licensed Apache+MIT)
     pub unsafe fn flash_unique_id(out: &mut [u8]) {
+        #[cfg(feature = "rp2040")]
         let mut boot2 = [0u32; 256 / 4];
-        let ptrs = if USE_BOOT2 {
-            rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
-            flash_function_pointers_with_boot2(false, false, &boot2)
-        } else {
+        let ptrs = {
+            #[cfg(feature = "rp2040")]
+            {
+                if USE_BOOT2 {
+                    rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
+                    flash_function_pointers_with_boot2(false, false, &boot2)
+                } else {
+                    flash_function_pointers(false, false)
+                }
+            }
+            #[cfg(feature = "_rp235x")]
             flash_function_pointers(false, false)
         };
+
         // 4B - read unique ID
         let cmd = [0x4B];
         read_flash(&cmd[..], 4, out, &ptrs as *const FlashFunctionPointers);
@@ -736,13 +769,22 @@ mod ram_helpers {
     ///
     /// Credit: taken from `rp2040-flash` (also licensed Apache+MIT)
     pub unsafe fn flash_jedec_id() -> u32 {
+        #[cfg(feature = "rp2040")]
         let mut boot2 = [0u32; 256 / 4];
-        let ptrs = if USE_BOOT2 {
-            rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
-            flash_function_pointers_with_boot2(false, false, &boot2)
-        } else {
+        let ptrs = {
+            #[cfg(feature = "rp2040")]
+            {
+                if USE_BOOT2 {
+                    rom_data::memcpy44(&mut boot2 as *mut _, FLASH_BASE, 256);
+                    flash_function_pointers_with_boot2(false, false, &boot2)
+                } else {
+                    flash_function_pointers(false, false)
+                }
+            }
+            #[cfg(feature = "_rp235x")]
             flash_function_pointers(false, false)
         };
+
         let mut id = [0u8; 4];
         // 9F - read JEDEC ID
         let cmd = [0x9F];
diff --git a/embassy-rp/src/lib.rs b/embassy-rp/src/lib.rs
index 21f0771de..c2c57eaa0 100644
--- a/embassy-rp/src/lib.rs
+++ b/embassy-rp/src/lib.rs
@@ -15,6 +15,7 @@ pub use rp_binary_info as binary_info;
 #[cfg(feature = "critical-section-impl")]
 mod critical_section_impl;
 
+#[cfg(feature = "rp2040")]
 mod intrinsics;
 
 pub mod adc;
diff --git a/embassy-rp/src/rom_data/mod.rs b/embassy-rp/src/rom_data/mod.rs
new file mode 100644
index 000000000..e5fcf8e3c
--- /dev/null
+++ b/embassy-rp/src/rom_data/mod.rs
@@ -0,0 +1,33 @@
+#![cfg_attr(
+    feature = "rp2040",
+    doc = r"
+//! Functions and data from the RPI Bootrom.
+//!
+//! From the [RP2040 datasheet](https://datasheets.raspberrypi.org/rp2040/rp2040-datasheet.pdf), Section 2.8.2.1:
+//!
+//! > The Bootrom contains a number of public functions that provide useful
+//! > RP2040 functionality that might be needed in the absence of any other code
+//! > on the device, as well as highly optimized versions of certain key
+//! > functionality that would otherwise have to take up space in most user
+//! > binaries.
+"
+)]
+#![cfg_attr(
+    feature = "_rp235x",
+    doc = r"
+//! Functions and data from the RPI Bootrom.
+//!
+//! From [Section 5.4](https://rptl.io/rp2350-datasheet#section_bootrom) of the
+//! RP2350 datasheet:
+//!
+//! > Whilst some ROM space is dedicated to the implementation of the boot
+//! > sequence and USB/UART boot interfaces, the bootrom also contains public
+//! > functions that provide useful RP2350 functionality that may be useful for
+//! > any code or runtime running on the device
+"
+)]
+
+#[cfg_attr(feature = "rp2040", path = "rp2040.rs")]
+#[cfg_attr(feature = "_rp235x", path = "rp235x.rs")]
+mod inner;
+pub use inner::*;
diff --git a/embassy-rp/src/rom_data.rs b/embassy-rp/src/rom_data/rp2040.rs
similarity index 99%
rename from embassy-rp/src/rom_data.rs
rename to embassy-rp/src/rom_data/rp2040.rs
index baebe5b6c..5a74eddd6 100644
--- a/embassy-rp/src/rom_data.rs
+++ b/embassy-rp/src/rom_data/rp2040.rs
@@ -189,7 +189,7 @@ macro_rules! rom_functions {
         declare_rom_function! {
             $(#[$outer])*
             fn $name( $($argname: $ty),* ) -> $ret {
-                $crate::rom_data::rom_table_lookup($crate::rom_data::FUNC_TABLE, *$c)
+                $crate::rom_data::inner::rom_table_lookup($crate::rom_data::inner::FUNC_TABLE, *$c)
             }
         }
 
@@ -205,7 +205,7 @@ macro_rules! rom_functions {
         declare_rom_function! {
             $(#[$outer])*
             unsafe fn $name( $($argname: $ty),* ) -> $ret {
-                $crate::rom_data::rom_table_lookup($crate::rom_data::FUNC_TABLE, *$c)
+                $crate::rom_data::inner::rom_table_lookup($crate::rom_data::inner::FUNC_TABLE, *$c)
             }
         }
 
diff --git a/embassy-rp/src/rom_data/rp235x.rs b/embassy-rp/src/rom_data/rp235x.rs
new file mode 100644
index 000000000..b16fee8f7
--- /dev/null
+++ b/embassy-rp/src/rom_data/rp235x.rs
@@ -0,0 +1,752 @@
+//! Functions and data from the RPI Bootrom.
+//!
+//! From [Section 5.4](https://rptl.io/rp2350-datasheet#section_bootrom) of the
+//! RP2350 datasheet:
+//!
+//! > Whilst some ROM space is dedicated to the implementation of the boot
+//! > sequence and USB/UART boot interfaces, the bootrom also contains public
+//! > functions that provide useful RP2350 functionality that may be useful for
+//! > any code or runtime running on the device
+
+// Credit: taken from `rp-hal` (also licensed Apache+MIT)
+// https://github.com/rp-rs/rp-hal/blob/main/rp235x-hal/src/rom_data.rs
+
+/// A bootrom function table code.
+pub type RomFnTableCode = [u8; 2];
+
+/// This function searches for the tag which matches the mask.
+type RomTableLookupFn = unsafe extern "C" fn(code: u32, mask: u32) -> usize;
+
+/// Pointer to the value lookup function supplied by the ROM.
+///
+/// This address is described at `5.5.1. Locating the API Functions`
+#[cfg(all(target_arch = "arm", target_os = "none"))]
+const ROM_TABLE_LOOKUP_A2: *const u16 = 0x0000_0016 as _;
+
+/// Pointer to the value lookup function supplied by the ROM.
+///
+/// This address is described at `5.5.1. Locating the API Functions`
+#[cfg(all(target_arch = "arm", target_os = "none"))]
+const ROM_TABLE_LOOKUP_A1: *const u32 = 0x0000_0018 as _;
+
+/// Pointer to the data lookup function supplied by the ROM.
+///
+/// On Arm, the same function is used to look up code and data.
+#[cfg(all(target_arch = "arm", target_os = "none"))]
+const ROM_DATA_LOOKUP_A2: *const u16 = ROM_TABLE_LOOKUP_A2;
+
+/// Pointer to the data lookup function supplied by the ROM.
+///
+/// On Arm, the same function is used to look up code and data.
+#[cfg(all(target_arch = "arm", target_os = "none"))]
+const ROM_DATA_LOOKUP_A1: *const u32 = ROM_TABLE_LOOKUP_A1;
+
+/// Pointer to the value lookup function supplied by the ROM.
+///
+/// This address is described at `5.5.1. Locating the API Functions`
+#[cfg(not(all(target_arch = "arm", target_os = "none")))]
+const ROM_TABLE_LOOKUP_A2: *const u16 = 0x0000_7DFA as _;
+
+/// Pointer to the value lookup function supplied by the ROM.
+///
+/// This address is described at `5.5.1. Locating the API Functions`
+#[cfg(not(all(target_arch = "arm", target_os = "none")))]
+const ROM_TABLE_LOOKUP_A1: *const u32 = 0x0000_7DF8 as _;
+
+/// Pointer to the data lookup function supplied by the ROM.
+///
+/// On RISC-V, a different function is used to look up data.
+#[cfg(not(all(target_arch = "arm", target_os = "none")))]
+const ROM_DATA_LOOKUP_A2: *const u16 = 0x0000_7DF8 as _;
+
+/// Pointer to the data lookup function supplied by the ROM.
+///
+/// On RISC-V, a different function is used to look up data.
+#[cfg(not(all(target_arch = "arm", target_os = "none")))]
+const ROM_DATA_LOOKUP_A1: *const u32 = 0x0000_7DF4 as _;
+
+/// Address of the version number of the ROM.
+const VERSION_NUMBER: *const u8 = 0x0000_0013 as _;
+
+#[allow(unused)]
+mod rt_flags {
+    pub const FUNC_RISCV: u32 = 0x0001;
+    pub const FUNC_RISCV_FAR: u32 = 0x0003;
+    pub const FUNC_ARM_SEC: u32 = 0x0004;
+    // reserved for 32-bit pointer: 0x0008
+    pub const FUNC_ARM_NONSEC: u32 = 0x0010;
+    // reserved for 32-bit pointer: 0x0020
+    pub const DATA: u32 = 0x0040;
+    // reserved for 32-bit pointer: 0x0080
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    pub const FUNC_ARM_SEC_RISCV: u32 = FUNC_ARM_SEC;
+    #[cfg(not(all(target_arch = "arm", target_os = "none")))]
+    pub const FUNC_ARM_SEC_RISCV: u32 = FUNC_RISCV;
+}
+
+/// Retrieve rom content from a table using a code.
+pub fn rom_table_lookup(tag: RomFnTableCode, mask: u32) -> usize {
+    let tag = u16::from_le_bytes(tag) as u32;
+    unsafe {
+        let lookup_func = if rom_version_number() == 1 {
+            ROM_TABLE_LOOKUP_A1.read() as usize
+        } else {
+            ROM_TABLE_LOOKUP_A2.read() as usize
+        };
+        let lookup_func: RomTableLookupFn = core::mem::transmute(lookup_func);
+        lookup_func(tag, mask)
+    }
+}
+
+/// Retrieve rom data content from a table using a code.
+pub fn rom_data_lookup(tag: RomFnTableCode, mask: u32) -> usize {
+    let tag = u16::from_le_bytes(tag) as u32;
+    unsafe {
+        let lookup_func = if rom_version_number() == 1 {
+            ROM_DATA_LOOKUP_A1.read() as usize
+        } else {
+            ROM_DATA_LOOKUP_A2.read() as usize
+        };
+        let lookup_func: RomTableLookupFn = core::mem::transmute(lookup_func);
+        lookup_func(tag, mask)
+    }
+}
+
+macro_rules! declare_rom_function {
+    (
+        $(#[$outer:meta])*
+        fn $name:ident( $($argname:ident: $ty:ty),* ) -> $ret:ty
+        $lookup:block
+    ) => {
+        #[doc = r"Additional access for the `"]
+        #[doc = stringify!($name)]
+        #[doc = r"` ROM function."]
+        pub mod $name {
+            /// Retrieve a function pointer.
+            #[cfg(not(feature = "rom-func-cache"))]
+            pub fn ptr() -> extern "C" fn( $($argname: $ty),* ) -> $ret {
+                let p: usize = $lookup;
+                unsafe {
+                    let func : extern "C" fn( $($argname: $ty),* ) -> $ret = core::mem::transmute(p);
+                    func
+                }
+            }
+
+            /// Retrieve a function pointer.
+            #[cfg(feature = "rom-func-cache")]
+            pub fn ptr() -> extern "C" fn( $($argname: $ty),* ) -> $ret {
+                use core::sync::atomic::{AtomicU16, Ordering};
+
+                // All pointers in the ROM fit in 16 bits, so we don't need a
+                // full width word to store the cached value.
+                static CACHED_PTR: AtomicU16 = AtomicU16::new(0);
+                // This is safe because the lookup will always resolve
+                // to the same value.  So even if an interrupt or another
+                // core starts at the same time, it just repeats some
+                // work and eventually writes back the correct value.
+                let p: usize = match CACHED_PTR.load(Ordering::Relaxed) {
+                    0 => {
+                        let raw: usize = $lookup;
+                        CACHED_PTR.store(raw as u16, Ordering::Relaxed);
+                        raw
+                    },
+                    val => val as usize,
+                };
+                unsafe {
+                    let func : extern "C" fn( $($argname: $ty),* ) -> $ret = core::mem::transmute(p);
+                    func
+                }
+            }
+        }
+
+        $(#[$outer])*
+        pub extern "C" fn $name( $($argname: $ty),* ) -> $ret {
+            $name::ptr()($($argname),*)
+        }
+    };
+
+    (
+        $(#[$outer:meta])*
+        unsafe fn $name:ident( $($argname:ident: $ty:ty),* ) -> $ret:ty
+        $lookup:block
+    ) => {
+        #[doc = r"Additional access for the `"]
+        #[doc = stringify!($name)]
+        #[doc = r"` ROM function."]
+        pub mod $name {
+            /// Retrieve a function pointer.
+            #[cfg(not(feature = "rom-func-cache"))]
+            pub fn ptr() -> unsafe extern "C" fn( $($argname: $ty),* ) -> $ret {
+                let p: usize = $lookup;
+                unsafe {
+                    let func : unsafe extern "C" fn( $($argname: $ty),* ) -> $ret = core::mem::transmute(p);
+                    func
+                }
+            }
+
+            /// Retrieve a function pointer.
+            #[cfg(feature = "rom-func-cache")]
+            pub fn ptr() -> unsafe extern "C" fn( $($argname: $ty),* ) -> $ret {
+                use core::sync::atomic::{AtomicU16, Ordering};
+
+                // All pointers in the ROM fit in 16 bits, so we don't need a
+                // full width word to store the cached value.
+                static CACHED_PTR: AtomicU16 = AtomicU16::new(0);
+                // This is safe because the lookup will always resolve
+                // to the same value.  So even if an interrupt or another
+                // core starts at the same time, it just repeats some
+                // work and eventually writes back the correct value.
+                let p: usize = match CACHED_PTR.load(Ordering::Relaxed) {
+                    0 => {
+                        let raw: usize = $lookup;
+                        CACHED_PTR.store(raw as u16, Ordering::Relaxed);
+                        raw
+                    },
+                    val => val as usize,
+                };
+                unsafe {
+                    let func : unsafe extern "C" fn( $($argname: $ty),* ) -> $ret = core::mem::transmute(p);
+                    func
+                }
+            }
+        }
+
+        $(#[$outer])*
+        /// # Safety
+        ///
+        /// This is a low-level C function. It may be difficult to call safely from
+        /// Rust. If in doubt, check the rp235x datasheet for details and do your own
+        /// safety evaluation.
+        pub unsafe extern "C" fn $name( $($argname: $ty),* ) -> $ret {
+            $name::ptr()($($argname),*)
+        }
+    };
+}
+
+// **************** 5.5.7 Low-level Flash Commands ****************
+
+declare_rom_function! {
+    /// Restore all QSPI pad controls to their default state, and connect the
+    /// QMI peripheral to the QSPI pads.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn connect_internal_flash() -> () {
+        crate::rom_data::rom_table_lookup(*b"IF", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Initialise the QMI for serial operations (direct mode)
+    ///
+    /// Also initialise a basic XIP mode, where the QMI will perform 03h serial
+    /// read commands at low speed (CLKDIV=12) in response to XIP reads.
+    ///
+    /// Then, issue a sequence to the QSPI device on chip select 0, designed to
+    /// return it from continuous read mode ("XIP mode") and/or QPI mode to a
+    /// state where it will accept serial commands. This is necessary after
+    /// system reset to restore the QSPI device to a known state, because
+    /// resetting RP2350 does not reset attached QSPI devices. It is also
+    /// necessary when user code, having already performed some
+    /// continuous-read-mode or QPI-mode accesses, wishes to return the QSPI
+    /// device to a state where it will accept the serial erase and programming
+    /// commands issued by the bootrom’s flash access functions.
+    ///
+    /// If a GPIO for the secondary chip select is configured via FLASH_DEVINFO,
+    /// then the XIP exit sequence is also issued to chip select 1.
+    ///
+    /// The QSPI device should be accessible for XIP reads after calling this
+    /// function; the name flash_exit_xip refers to returning the QSPI device
+    /// from its XIP state to a serial command state.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_exit_xip() -> () {
+        crate::rom_data::rom_table_lookup(*b"EX", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Erase count bytes, starting at addr (offset from start of flash).
+    ///
+    /// Optionally, pass a block erase command e.g. D8h block erase, and the
+    /// size of the block erased by this command — this function will use the
+    /// larger block erase where possible, for much higher erase speed. addr
+    /// must be aligned to a 4096-byte sector, and count must be a multiple of
+    /// 4096 bytes.
+    ///
+    /// This is a low-level flash API, and no validation of the arguments is
+    /// performed. See flash_op() for a higher-level API which checks alignment,
+    /// flash bounds and partition permissions, and can transparently apply a
+    /// runtime-to-storage address translation.
+    ///
+    /// The QSPI device must be in a serial command state before calling this
+    /// API, which can be achieved by calling connect_internal_flash() followed
+    /// by flash_exit_xip(). After the erase, the flash cache should be flushed
+    /// via flash_flush_cache() to ensure the modified flash data is visible to
+    /// cached XIP accesses.
+    ///
+    /// Finally, the original XIP mode should be restored by copying the saved
+    /// XIP setup function from bootram into SRAM, and executing it: the bootrom
+    /// provides a default function which restores the flash mode/clkdiv
+    /// discovered during flash scanning, and user programs can override this
+    /// with their own XIP setup function.
+    ///
+    /// For the duration of the erase operation, QMI is in direct mode (Section
+    /// 12.14.5) and attempting to access XIP from DMA, the debugger or the
+    /// other core will return a bus fault. XIP becomes accessible again once
+    /// the function returns.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_range_erase(addr: u32, count: usize, block_size: u32, block_cmd: u8) -> () {
+        crate::rom_data::rom_table_lookup(*b"RE", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Program data to a range of flash storage addresses starting at addr
+    /// (offset from the start of flash) and count bytes in size.
+    ///
+    /// `addr` must be aligned to a 256-byte boundary, and count must be a
+    /// multiple of 256.
+    ///
+    /// This is a low-level flash API, and no validation of the arguments is
+    /// performed. See flash_op() for a higher-level API which checks alignment,
+    /// flash bounds and partition permissions, and can transparently apply a
+    /// runtime-to-storage address translation.
+    ///
+    /// The QSPI device must be in a serial command state before calling this
+    /// API — see notes on flash_range_erase().
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_range_program(addr: u32, data: *const u8, count: usize) -> () {
+        crate::rom_data::rom_table_lookup(*b"RP", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Flush the entire XIP cache, by issuing an invalidate by set/way
+    /// maintenance operation to every cache line (Section 4.4.1).
+    ///
+    /// This ensures that flash program/erase operations are visible to
+    /// subsequent cached XIP reads.
+    ///
+    /// Note that this unpins pinned cache lines, which may interfere with
+    /// cache-as-SRAM use of the XIP cache.
+    ///
+    /// No other operations are performed.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_flush_cache() -> () {
+        crate::rom_data::rom_table_lookup(*b"FC", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Configure the QMI to generate a standard 03h serial read command, with
+    /// 24 address bits, upon each XIP access.
+    ///
+    /// This is a slow XIP configuration, but is widely supported. CLKDIV is set
+    /// to 12. The debugger may call this function to ensure that flash is
+    /// readable following a program/erase operation.
+    ///
+    /// Note that the same setup is performed by flash_exit_xip(), and the
+    /// RP2350 flash program/erase functions do not leave XIP in an inaccessible
+    /// state, so calls to this function are largely redundant. It is provided
+    /// for compatibility with RP2040.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_enter_cmd_xip() -> () {
+        crate::rom_data::rom_table_lookup(*b"CX", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Configure QMI for one of a small menu of XIP read modes supported by the
+    /// bootrom. This mode is configured for both memory windows (both chip
+    /// selects), and the clock divisor is also applied to direct mode.
+    ///
+    /// The available modes are:
+    ///
+    /// * 0: `03h` serial read: serial address, serial data, no wait cycles
+    /// * 1: `0Bh` serial read: serial address, serial data, 8 wait cycles
+    /// * 2: `BBh` dual-IO read: dual address, dual data, 4 wait cycles
+    ///   (including MODE bits, which are driven to 0)
+    /// * 3: `EBh` quad-IO read: quad address, quad data, 6 wait cycles
+    ///   (including MODE bits, which are driven to 0)
+    ///
+    /// The XIP write command/format are not configured by this function. When
+    /// booting from flash, the bootrom tries each of these modes in turn, from
+    /// 3 down to 0. The first mode that is found to work is remembered, and a
+    /// default XIP setup function is written into bootram that calls this
+    /// function (flash_select_xip_read_mode) with the parameters discovered
+    /// during flash scanning. This can be called at any time to restore the
+    /// flash parameters discovered during flash boot.
+    ///
+    /// All XIP modes configured by the bootrom have an 8-bit serial command
+    /// prefix, so that the flash can remain in a serial command state, meaning
+    /// XIP accesses can be mixed more freely with program/erase serial
+    /// operations. This has a performance penalty, so users can perform their
+    /// own flash setup after flash boot using continuous read mode or QPI mode
+    /// to avoid or alleviate the command prefix cost.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_select_xip_read_mode(bootrom_xip_mode: u8, clkdiv: u8) -> () {
+        crate::rom_data::rom_table_lookup(*b"XM", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Restore the QMI address translation registers, ATRANS0 through ATRANS7,
+    /// to their reset state. This makes the runtime- to-storage address map an
+    /// identity map, i.e. the mapped and unmapped address are equal, and the
+    /// entire space is fully mapped.
+    ///
+    /// See [Section 12.14.4](https://rptl.io/rp2350-datasheet#section_bootrom) of the RP2350
+    /// datasheet.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_reset_address_trans() -> () {
+        crate::rom_data::rom_table_lookup(*b"RA", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+// **************** High-level Flash Commands ****************
+
+declare_rom_function! {
+    /// Applies the address translation currently configured by QMI address
+    /// translation registers, ATRANS0 through ATRANS7.
+    ///
+    /// See [Section 12.14.4](https://rptl.io/rp2350-datasheet#section_bootrom) of the RP2350
+    /// datasheet.
+    ///
+    /// Translating an address outside of the XIP runtime address window, or
+    /// beyond the bounds of an ATRANSx_SIZE field, returns
+    /// BOOTROM_ERROR_INVALID_ADDRESS, which is not a valid flash storage
+    /// address. Otherwise, return the storage address which QMI would access
+    /// when presented with the runtime address addr. This is effectively a
+    /// virtual-to-physical address translation for QMI.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_runtime_to_storage_addr(addr: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"FA", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [flash_runtime_to_storage_addr()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn flash_runtime_to_storage_addr_ns(addr: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"FA", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+declare_rom_function! {
+    /// Perform a flash read, erase, or program operation.
+    ///
+    /// Erase operations must be sector-aligned (4096 bytes) and sector-
+    /// multiple-sized, and program operations must be page-aligned (256 bytes)
+    /// and page-multiple-sized; misaligned erase and program operations will
+    /// return BOOTROM_ERROR_BAD_ALIGNMENT. The operation — erase, read, program
+    /// — is selected by the CFLASH_OP_BITS bitfield of the flags argument.
+    ///
+    /// See datasheet section 5.5.8.2 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn flash_op(flags: u32, addr: u32, size_bytes: u32, buffer: *mut u8) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"FO", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [flash_op()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn flash_op_ns(flags: u32, addr: u32, size_bytes: u32, buffer: *mut u8) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"FO", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+// **************** Security Related Functions ****************
+
+declare_rom_function! {
+    /// Allow or disallow the specific NS API (note all NS APIs default to
+    /// disabled).
+    ///
+    /// See datasheet section 5.5.9.1 for more details.
+    ///
+    /// Supported architectures: ARM-S
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn set_ns_api_permission(ns_api_num: u32, allowed: u8) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"SP", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC)
+    }
+}
+
+declare_rom_function! {
+    /// Utility method that can be used by secure ARM code to validate a buffer
+    /// passed to it from Non-secure code.
+    ///
+    /// See datasheet section 5.5.9.2 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn validate_ns_buffer() -> () {
+        crate::rom_data::rom_table_lookup(*b"VB", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+// **************** Miscellaneous Functions ****************
+
+declare_rom_function! {
+    /// Resets the RP2350 and uses the watchdog facility to restart.
+    ///
+    /// See datasheet section 5.5.10.1 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    fn reboot(flags: u32, delay_ms: u32, p0: u32, p1: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"RB", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [reboot()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    fn reboot_ns(flags: u32, delay_ms: u32, p0: u32, p1: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"RB", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+declare_rom_function! {
+    /// Resets internal bootrom state.
+    ///
+    /// See datasheet section 5.5.10.2 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn bootrom_state_reset(flags: u32) -> () {
+        crate::rom_data::rom_table_lookup(*b"SR", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Set a boot ROM callback.
+    ///
+    /// The only supported callback_number is 0 which sets the callback used for
+    /// the secure_call API.
+    ///
+    /// See datasheet section 5.5.10.3 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn set_rom_callback(callback_number: i32, callback_fn: *const ()) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"RC", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+// **************** System Information Functions ****************
+
+declare_rom_function! {
+    /// Fills a buffer with various system information.
+    ///
+    /// Note that this API is also used to return information over the PICOBOOT
+    /// interface.
+    ///
+    /// See datasheet section 5.5.11.1 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn get_sys_info(out_buffer: *mut u32, out_buffer_word_size: usize, flags: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GS", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [get_sys_info()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn get_sys_info_ns(out_buffer: *mut u32, out_buffer_word_size: usize, flags: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GS", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+declare_rom_function! {
+    /// Fills a buffer with information from the partition table.
+    ///
+    /// Note that this API is also used to return information over the PICOBOOT
+    /// interface.
+    ///
+    /// See datasheet section 5.5.11.2 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn get_partition_table_info(out_buffer: *mut u32, out_buffer_word_size: usize, flags_and_partition: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GP", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [get_partition_table_info()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn get_partition_table_info_ns(out_buffer: *mut u32, out_buffer_word_size: usize, flags_and_partition: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GP", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+declare_rom_function! {
+    /// Loads the current partition table from flash, if present.
+    ///
+    /// See datasheet section 5.5.11.3 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn load_partition_table(workarea_base: *mut u8, workarea_size: usize, force_reload: bool) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"LP", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Writes data from a buffer into OTP, or reads data from OTP into a buffer.
+    ///
+    /// See datasheet section 5.5.11.4 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn otp_access(buf: *mut u8, buf_len: usize, row_and_flags: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"OA", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Non-secure version of [otp_access()]
+    ///
+    /// Supported architectures: ARM-NS
+    #[cfg(all(target_arch = "arm", target_os = "none"))]
+    unsafe fn otp_access_ns(buf: *mut u8, buf_len: usize, row_and_flags: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"OA", crate::rom_data::inner::rt_flags::FUNC_ARM_NONSEC)
+    }
+}
+
+// **************** Boot Related Functions ****************
+
+declare_rom_function! {
+    /// Determines which of the partitions has the "better" IMAGE_DEF. In the
+    /// case of executable images, this is the one that would be booted.
+    ///
+    /// See datasheet section 5.5.12.1 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn pick_ab_parition(workarea_base: *mut u8, workarea_size: usize, partition_a_num: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"AB", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Searches a memory region for a launchable image, and executes it if
+    /// possible.
+    ///
+    /// See datasheet section 5.5.12.2 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn chain_image(workarea_base: *mut u8, workarea_size: usize, region_base: i32, region_size: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"CI", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Perform an "explicit" buy of an executable launched via an IMAGE_DEF
+    /// which was "explicit buy" flagged.
+    ///
+    /// See datasheet section 5.5.12.3 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn explicit_buy(buffer: *mut u8, buffer_size: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"EB", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Not yet documented.
+    ///
+    /// See datasheet section 5.5.12.4 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn get_uf2_target_partition(workarea_base: *mut u8, workarea_size: usize, family_id: u32, partition_out: *mut u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GU", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+declare_rom_function! {
+    /// Returns: The index of the B partition of partition A if a partition
+    /// table is present and loaded, and there is a partition A with a B
+    /// partition; otherwise returns BOOTROM_ERROR_NOT_FOUND.
+    ///
+    /// See datasheet section 5.5.12.5 for more details.
+    ///
+    /// Supported architectures: ARM-S, RISC-V
+    unsafe fn get_b_partition(partition_a: u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"GB", crate::rom_data::inner::rt_flags::FUNC_ARM_SEC_RISCV)
+    }
+}
+
+// **************** Non-secure-specific Functions ****************
+
+// NB: The "secure_call" function should be here, but it doesn't have a fixed
+// function signature as it is designed to let you bounce into any secure
+// function from non-secure mode.
+
+// **************** RISC-V Functions ****************
+
+declare_rom_function! {
+    /// Set stack for RISC-V bootrom functions to use.
+    ///
+    /// See datasheet section 5.5.14.1 for more details.
+    ///
+    /// Supported architectures: RISC-V
+    #[cfg(not(all(target_arch = "arm", target_os = "none")))]
+    unsafe fn set_bootrom_stack(base_size: *mut u32) -> i32 {
+        crate::rom_data::rom_table_lookup(*b"SS", crate::rom_data::inner::rt_flags::FUNC_RISCV)
+    }
+}
+
+/// The version number of the rom.
+pub fn rom_version_number() -> u8 {
+    unsafe { *VERSION_NUMBER }
+}
+
+/// The 8 most significant hex digits of the Bootrom git revision.
+pub fn git_revision() -> u32 {
+    let ptr = rom_data_lookup(*b"GR", rt_flags::DATA) as *const u32;
+    unsafe { ptr.read() }
+}
+
+/// A pointer to the resident partition table info.
+///
+/// The resident partition table is the subset of the full partition table that
+/// is kept in memory, and used for flash permissions.
+pub fn partition_table_pointer() -> *const u32 {
+    let ptr = rom_data_lookup(*b"PT", rt_flags::DATA) as *const *const u32;
+    unsafe { ptr.read() }
+}
+
+/// Determine if we are in secure mode
+///
+/// Returns `true` if we are in secure mode and `false` if we are in non-secure
+/// mode.
+#[cfg(all(target_arch = "arm", target_os = "none"))]
+pub fn is_secure_mode() -> bool {
+    // Look at the start of ROM, which is always readable
+    #[allow(clippy::zero_ptr)]
+    let rom_base: *mut u32 = 0x0000_0000 as *mut u32;
+    // Use the 'tt' instruction to check the permissions for that address
+    let tt = cortex_m::asm::tt(rom_base);
+    // Is the secure bit set? => secure mode
+    (tt & (1 << 22)) != 0
+}
+
+/// Determine if we are in secure mode
+///
+/// Always returns `false` on RISC-V as it is impossible to determine if
+/// you are in Machine Mode or User Mode by design.
+#[cfg(not(all(target_arch = "arm", target_os = "none")))]
+pub fn is_secure_mode() -> bool {
+    false
+}