nordic-dev.net/embassy
2
0
Fork 0
mirror of https://github.com/embassy-rs/embassy.git synced 2024-11-22 06:42:32 +00:00
Code Issues Packages Projects Releases Wiki Activity

stm32/rcc: port U5 to new API, add all PLLs, all HSE modes.

Browse Source
This commit is contained in:
Dario Nieuwenhuis 2024-02-23 01:22:11 +01:00
parent 4481c5f3cc
commit 0665e0d452
3 changed files with 314 additions and 363 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

637
embassy-stm32/src/rcc/u5.rs
View File

@ -1,134 +1,83 @@
pub use crate::pac::rcc::vals::{Hpre as AHBPrescaler, Msirange, Plldiv, Pllm, Plln, Ppre as APBPrescaler};
use crate::pac::rcc::vals::{Msirgsel, Pllmboost, Pllrge, Pllsrc, Sw};
pub use crate::pac::pwr::vals::Vos as VoltageScale;
pub use crate::pac::rcc::vals::{
Hpre as AHBPrescaler, Msirange, Msirange as MSIRange, Plldiv as PllDiv, Pllm as PllPreDiv, Plln as PllMul,
Pllsrc as PllSource, Ppre as APBPrescaler, Sw as ClockSrc,
};
use crate::pac::rcc::vals::{Hseext, Msirgsel, Pllmboost, Pllrge};
use crate::pac::{FLASH, PWR, RCC};
use crate::time::Hertz;
/// HSI speed
pub const HSI_FREQ: Hertz = Hertz(16_000_000);
pub use crate::pac::pwr::vals::Vos as VoltageScale;
#[derive(Copy, Clone)]
#[allow(non_camel_case_types)]
pub enum ClockSrc {
/// Use an internal medium speed oscillator (MSIS) as the system clock.
MSI(Msirange),
/// Use the external high speed clock as the system clock.
///
/// HSE clocks faster than 25 MHz require at least `VoltageScale::RANGE3`, and HSE clocks must
/// never exceed 50 MHz.
HSE(Hertz),
/// Use the 16 MHz internal high speed oscillator as the system clock.
HSI,
/// Use PLL1 as the system clock.
PLL1_R(PllConfig),
#[derive(Clone, Copy, Eq, PartialEq)]
pub enum HseMode {
/// crystal/ceramic oscillator (HSEBYP=0)
Oscillator,
/// external analog clock (low swing) (HSEBYP=1, HSEEXT=0)
Bypass,
/// external digital clock (full swing) (HSEBYP=1, HSEEXT=1)
BypassDigital,
}
impl Default for ClockSrc {
fn default() -> Self {
// The default system clock source is MSIS @ 4 MHz, per RM0456 § 11.4.9
ClockSrc::MSI(Msirange::RANGE_4MHZ)
}
#[derive(Clone, Copy, Eq, PartialEq)]
pub struct Hse {
/// HSE frequency.
pub freq: Hertz,
/// HSE mode.
pub mode: HseMode,
}
#[derive(Clone, Copy)]
pub struct PllConfig {
pub struct Pll {
/// The clock source for the PLL.
pub source: PllSource,
/// The PLL prescaler.
/// The PLL pre-divider.
///
/// The clock speed of the `source` divided by `m` must be between 4 and 16 MHz.
pub m: Pllm,
pub prediv: PllPreDiv,
/// The PLL multiplier.
///
/// The multiplied clock – `source` divided by `m` times `n` – must be between 128 and 544
/// MHz. The upper limit may be lower depending on the `Config { voltage_range }`.
pub n: Plln,
pub mul: PllMul,
/// The divider for the P output.
///
/// The P output is one of several options
/// that can be used to feed the SAI/MDF/ADF Clock mux's.
pub p: Plldiv,
pub divp: Option<PllDiv>,
/// The divider for the Q output.
///
/// The Q ouput is one of severals options that can be used to feed the 48MHz clocks
/// and the OCTOSPI clock. It may also be used on the MDF/ADF clock mux's.
pub q: Plldiv,
pub divq: Option<PllDiv>,
/// The divider for the R output.
///
/// When used to drive the system clock, `source` divided by `m` times `n` divided by `r`
/// must not exceed 160 MHz. System clocks above 55 MHz require a non-default
/// `Config { voltage_range }`.
pub r: Plldiv,
}
impl PllConfig {
/// A configuration for HSI / 1 * 10 / 1 = 160 MHz
pub const fn hsi_160mhz() -> Self {
PllConfig {
source: PllSource::HSI,
m: Pllm::DIV1,
n: Plln::MUL10,
p: Plldiv::DIV3,
q: Plldiv::DIV2,
r: Plldiv::DIV1,
}
}
/// A configuration for MSIS @ 48 MHz / 3 * 10 / 1 = 160 MHz
pub const fn msis_160mhz() -> Self {
PllConfig {
source: PllSource::MSIS(Msirange::RANGE_48MHZ),
m: Pllm::DIV3,
n: Plln::MUL10,
p: Plldiv::DIV3,
q: Plldiv::DIV2,
r: Plldiv::DIV1,
}
}
}
#[derive(Clone, Copy)]
pub enum PllSource {
/// Use an internal medium speed oscillator as the PLL source.
MSIS(Msirange),
/// Use the external high speed clock as the system PLL source.
///
/// HSE clocks faster than 25 MHz require at least `VoltageScale::RANGE3`, and HSE clocks must
/// never exceed 50 MHz.
HSE(Hertz),
/// Use the 16 MHz internal high speed oscillator as the PLL source.
HSI,
}
impl Into<Pllsrc> for PllSource {
fn into(self) -> Pllsrc {
match self {
PllSource::MSIS(..) => Pllsrc::MSIS,
PllSource::HSE(..) => Pllsrc::HSE,
PllSource::HSI => Pllsrc::HSI,
}
}
}
impl Into<Sw> for ClockSrc {
fn into(self) -> Sw {
match self {
ClockSrc::MSI(..) => Sw::MSIS,
ClockSrc::HSE(..) => Sw::HSE,
ClockSrc::HSI => Sw::HSI,
ClockSrc::PLL1_R(..) => Sw::PLL1_R,
}
}
pub divr: Option<PllDiv>,
}
pub struct Config {
// base clock sources
pub msi: Option<MSIRange>,
pub hsi: bool,
pub hse: Option<Hse>,
pub hsi48: Option<super::Hsi48Config>,
// pll
pub pll1: Option<Pll>,
pub pll2: Option<Pll>,
pub pll3: Option<Pll>,
// sysclk, buses.
pub mux: ClockSrc,
pub ahb_pre: AHBPrescaler,
pub apb1_pre: APBPrescaler,
pub apb2_pre: APBPrescaler,
pub apb3_pre: APBPrescaler,
pub hsi48: Option<super::Hsi48Config>,
/// The voltage range influences the maximum clock frequencies for different parts of the
/// device. In particular, system clocks exceeding 110 MHz require `RANGE1`, and system clocks
/// exceeding 55 MHz require at least `RANGE2`.
@ -138,35 +87,35 @@ pub struct Config {
pub ls: super::LsConfig,
}
impl Config {
unsafe fn init_hsi(&self) -> Hertz {
RCC.cr().write(|w| w.set_hsion(true));
while !RCC.cr().read().hsirdy() {}
HSI_FREQ
}
unsafe fn init_hse(&self, frequency: Hertz) -> Hertz {
// Check frequency limits per RM456 § 11.4.10
match self.voltage_range {
VoltageScale::RANGE1 | VoltageScale::RANGE2 | VoltageScale::RANGE3 => {
assert!(frequency.0 <= 50_000_000);
}
VoltageScale::RANGE4 => {
assert!(frequency.0 <= 25_000_000);
}
impl Default for Config {
fn default() -> Self {
Self {
msi: Some(Msirange::RANGE_4MHZ),
hse: None,
hsi: false,
hsi48: Some(Default::default()),
pll1: None,
pll2: None,
pll3: None,
mux: ClockSrc::MSIS,
ahb_pre: AHBPrescaler::DIV1,
apb1_pre: APBPrescaler::DIV1,
apb2_pre: APBPrescaler::DIV1,
apb3_pre: APBPrescaler::DIV1,
voltage_range: VoltageScale::RANGE1,
ls: Default::default(),
}
// Enable HSE, and wait for it to stabilize
RCC.cr().write(|w| w.set_hseon(true));
while !RCC.cr().read().hserdy() {}
frequency
}
}
unsafe fn init_msis(&self, range: Msirange) -> Hertz {
pub(crate) unsafe fn init(config: Config) {
// Set the requested power mode
PWR.vosr().modify(|w| w.set_vos(config.voltage_range));
while !PWR.vosr().read().vosrdy() {}
let msi = config.msi.map(|range| {
// Check MSI output per RM0456 § 11.4.10
match self.voltage_range {
match config.voltage_range {
VoltageScale::RANGE4 => {
assert!(msirange_to_hertz(range).0 <= 24_000_000);
}
@ -191,223 +140,98 @@ impl Config {
});
while !RCC.cr().read().msisrdy() {}
msirange_to_hertz(range)
}
}
impl Default for Config {
fn default() -> Self {
Self {
mux: ClockSrc::default(),
ahb_pre: AHBPrescaler::DIV1,
apb1_pre: APBPrescaler::DIV1,
apb2_pre: APBPrescaler::DIV1,
apb3_pre: APBPrescaler::DIV1,
hsi48: Some(Default::default()),
voltage_range: VoltageScale::RANGE3,
ls: Default::default(),
}
}
}
pub(crate) unsafe fn init(config: Config) {
// Ensure PWR peripheral clock is enabled
RCC.ahb3enr().modify(|w| {
w.set_pwren(true);
});
RCC.ahb3enr().read(); // synchronize
// Set the requested power mode
PWR.vosr().modify(|w| {
w.set_vos(config.voltage_range);
let hsi = config.hsi.then(|| {
RCC.cr().write(|w| w.set_hsion(true));
while !RCC.cr().read().hsirdy() {}
HSI_FREQ
});
while !PWR.vosr().read().vosrdy() {}
let sys_clk = match config.mux {
ClockSrc::MSI(range) => config.init_msis(range),
ClockSrc::HSE(freq) => config.init_hse(freq),
ClockSrc::HSI => config.init_hsi(),
ClockSrc::PLL1_R(pll) => {
// Configure the PLL source
let source_clk = match pll.source {
PllSource::MSIS(range) => config.init_msis(range),
PllSource::HSE(hertz) => config.init_hse(hertz),
PllSource::HSI => config.init_hsi(),
};
// Calculate the reference clock, which is the source divided by m
let reference_clk = source_clk / pll.m;
// Check limits per RM0456 § 11.4.6
assert!(Hertz::mhz(4) <= reference_clk && reference_clk <= Hertz::mhz(16));
// Calculate the PLL1 VCO clock and PLL1 R output clock
let pll1_clk = reference_clk * pll.n;
let pll1r_clk = pll1_clk / pll.r;
// Check system clock per RM0456 § 11.4.9
assert!(pll1r_clk <= Hertz::mhz(160));
// Check PLL clocks per RM0456 § 11.4.10
match config.voltage_range {
VoltageScale::RANGE1 => {
assert!(pll1_clk >= Hertz::mhz(128) && pll1_clk <= Hertz::mhz(544));
assert!(pll1r_clk <= Hertz::mhz(208));
}
VoltageScale::RANGE2 => {
assert!(pll1_clk >= Hertz::mhz(128) && pll1_clk <= Hertz::mhz(544));
assert!(pll1r_clk <= Hertz::mhz(110));
}
VoltageScale::RANGE3 => {
assert!(pll1_clk >= Hertz::mhz(128) && pll1_clk <= Hertz::mhz(330));
assert!(pll1r_clk <= Hertz::mhz(55));
}
VoltageScale::RANGE4 => {
panic!("PLL is unavailable in voltage range 4");
}
let hse = config.hse.map(|hse| {
// Check frequency limits per RM456 § 11.4.10
match config.voltage_range {
VoltageScale::RANGE1 | VoltageScale::RANGE2 | VoltageScale::RANGE3 => {
assert!(hse.freq.0 <= 50_000_000);
}
// § 10.5.4: if we're targeting >= 55 MHz, we must configure PLL1MBOOST to a prescaler
// value that results in an output between 4 and 16 MHz for the PWR EPOD boost
let mboost = if pll1r_clk >= Hertz::mhz(55) {
// source_clk can be up to 50 MHz, so there's just a few cases:
if source_clk > Hertz::mhz(32) {
// Divide by 4, giving EPOD 8-12.5 MHz
Pllmboost::DIV4
} else if source_clk > Hertz::mhz(16) {
// Divide by 2, giving EPOD 8-16 MHz
Pllmboost::DIV2
} else {
// Bypass, giving EPOD 4-16 MHz
Pllmboost::DIV1
}
} else {
// Nothing to do
Pllmboost::DIV1
};
// Disable the PLL, and wait for it to disable
RCC.cr().modify(|w| w.set_pllon(0, false));
while RCC.cr().read().pllrdy(0) {}
// Configure the PLL
RCC.pll1cfgr().write(|w| {
// Configure PLL1 source and prescaler
w.set_pllsrc(pll.source.into());
w.set_pllm(pll.m);
// Configure PLL1 input frequncy range
let input_range = if reference_clk <= Hertz::mhz(8) {
Pllrge::FREQ_4TO8MHZ
} else {
Pllrge::FREQ_8TO16MHZ
};
w.set_pllrge(input_range);
// Set the prescaler for PWR EPOD
w.set_pllmboost(mboost);
// Enable PLL1_R output
w.set_pllren(true);
});
// Configure the PLL divisors
RCC.pll1divr().modify(|w| {
// Set the VCO multiplier
w.set_plln(pll.n);
w.set_pllp(pll.p);
w.set_pllq(pll.q);
// Set the R output divisor
w.set_pllr(pll.r);
});
// Do we need the EPOD booster to reach the target clock speed per § 10.5.4?
if pll1r_clk >= Hertz::mhz(55) {
// Enable the booster
PWR.vosr().modify(|w| {
w.set_boosten(true);
});
while !PWR.vosr().read().boostrdy() {}
VoltageScale::RANGE4 => {
assert!(hse.freq.0 <= 25_000_000);
}
// Enable the PLL
RCC.cr().modify(|w| w.set_pllon(0, true));
while !RCC.cr().read().pllrdy(0) {}
pll1r_clk
}
};
// Enable HSE, and wait for it to stabilize
RCC.cr().write(|w| {
w.set_hseon(true);
w.set_hsebyp(hse.mode != HseMode::Oscillator);
w.set_hseext(match hse.mode {
HseMode::Oscillator | HseMode::Bypass => Hseext::ANALOG,
HseMode::BypassDigital => Hseext::DIGITAL,
});
});
while !RCC.cr().read().hserdy() {}
hse.freq
});
let hsi48 = config.hsi48.map(super::init_hsi48);
let pll_input = PllInput { hse, hsi, msi };
let pll1 = init_pll(PllInstance::Pll1, config.pll1, &pll_input, config.voltage_range);
let pll2 = init_pll(PllInstance::Pll2, config.pll2, &pll_input, config.voltage_range);
let pll3 = init_pll(PllInstance::Pll3, config.pll3, &pll_input, config.voltage_range);
let sys_clk = match config.mux {
ClockSrc::HSE => hse.unwrap(),
ClockSrc::HSI => hsi.unwrap(),
ClockSrc::MSIS => msi.unwrap(),
ClockSrc::PLL1_R => pll1.r.unwrap(),
};
// Do we need the EPOD booster to reach the target clock speed per § 10.5.4?
if sys_clk >= Hertz::mhz(55) {
// Enable the booster
PWR.vosr().modify(|w| w.set_boosten(true));
while !PWR.vosr().read().boostrdy() {}
}
// The clock source is ready
// Calculate and set the flash wait states
let wait_states = match config.voltage_range {
// VOS 1 range VCORE 1.26V - 1.40V
VoltageScale::RANGE1 => {
if sys_clk.0 < 32_000_000 {
0
} else if sys_clk.0 < 64_000_000 {
1
} else if sys_clk.0 < 96_000_000 {
2
} else if sys_clk.0 < 128_000_000 {
3
} else {
4
}
}
VoltageScale::RANGE1 => match sys_clk.0 {
..=32_000_000 => 0,
..=64_000_000 => 1,
..=96_000_000 => 2,
..=128_000_000 => 3,
_ => 4,
},
// VOS 2 range VCORE 1.15V - 1.26V
VoltageScale::RANGE2 => {
if sys_clk.0 < 30_000_000 {
0
} else if sys_clk.0 < 60_000_000 {
1
} else if sys_clk.0 < 90_000_000 {
2
} else {
3
}
}
VoltageScale::RANGE2 => match sys_clk.0 {
..=30_000_000 => 0,
..=60_000_000 => 1,
..=90_000_000 => 2,
_ => 3,
},
// VOS 3 range VCORE 1.05V - 1.15V
VoltageScale::RANGE3 => {
if sys_clk.0 < 24_000_000 {
0
} else if sys_clk.0 < 48_000_000 {
1
} else {
2
}
}
VoltageScale::RANGE3 => match sys_clk.0 {
..=24_000_000 => 0,
..=48_000_000 => 1,
_ => 2,
},
// VOS 4 range VCORE 0.95V - 1.05V
VoltageScale::RANGE4 => {
if sys_clk.0 < 12_000_000 {
0
} else {
1
}
}
VoltageScale::RANGE4 => match sys_clk.0 {
..=12_000_000 => 0,
_ => 1,
},
};
FLASH.acr().modify(|w| {
w.set_latency(wait_states);
});
// Switch the system clock source
RCC.cfgr1().modify(|w| {
w.set_sw(config.mux.into());
});
// RM0456 § 11.4.9 specifies maximum bus frequencies per voltage range, but the maximum bus
// frequency for each voltage range exactly matches the maximum permitted PLL output frequency.
// Given that:
//
// 1. Any bus frequency can never exceed the system clock frequency;
// 2. We checked the PLL output frequency if we're using it as a system clock;
// 3. The maximum HSE frequencies at each voltage range are lower than the bus limits, and
// we checked the HSE frequency if configured as a system clock; and
// 4. The maximum frequencies from the other clock sources are lower than the lowest bus
// frequency limit
//
// ...then we do not need to perform additional bus-related frequency checks.
RCC.cfgr1().modify(|w| w.set_sw(config.mux));
while RCC.cfgr1().read().sws() != config.mux {}
// Configure the bus prescalers
RCC.cfgr2().modify(|w| {
@ -419,64 +243,52 @@ pub(crate) unsafe fn init(config: Config) {
w.set_ppre3(config.apb3_pre);
});
let ahb_freq = sys_clk / config.ahb_pre;
let hclk = sys_clk / config.ahb_pre;
let (apb1_freq, apb1_tim_freq) = match config.apb1_pre {
APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
pre => {
let freq = ahb_freq / pre;
(freq, freq * 2u32)
}
let hclk_max = match config.voltage_range {
VoltageScale::RANGE1 => Hertz::mhz(160),
VoltageScale::RANGE2 => Hertz::mhz(110),
VoltageScale::RANGE3 => Hertz::mhz(55),
VoltageScale::RANGE4 => Hertz::mhz(25),
};
assert!(hclk <= hclk_max);
let (apb2_freq, apb2_tim_freq) = match config.apb2_pre {
APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
pre => {
let freq = ahb_freq / pre;
(freq, freq * 2u32)
}
};
let (apb3_freq, _apb3_tim_freq) = match config.apb3_pre {
APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
pre => {
let freq = ahb_freq / pre;
(freq, freq * 2u32)
}
};
let (pclk1, pclk1_tim) = super::util::calc_pclk(hclk, config.apb1_pre);
let (pclk2, pclk2_tim) = super::util::calc_pclk(hclk, config.apb2_pre);
let (pclk3, _) = super::util::calc_pclk(hclk, config.apb3_pre);
let rtc = config.ls.init();
set_clocks!(
sys: Some(sys_clk),
hclk1: Some(ahb_freq),
hclk2: Some(ahb_freq),
hclk3: Some(ahb_freq),
pclk1: Some(apb1_freq),
pclk2: Some(apb2_freq),
pclk3: Some(apb3_freq),
pclk1_tim: Some(apb1_tim_freq),
pclk2_tim: Some(apb2_tim_freq),
hclk1: Some(hclk),
hclk2: Some(hclk),
hclk3: Some(hclk),
pclk1: Some(pclk1),
pclk2: Some(pclk2),
pclk3: Some(pclk3),
pclk1_tim: Some(pclk1_tim),
pclk2_tim: Some(pclk2_tim),
hsi48: hsi48,
rtc: rtc,
hse: hse,
hsi: hsi,
pll1_p: pll1.p,
pll1_q: pll1.q,
pll1_r: pll1.r,
pll2_p: pll2.p,
pll2_q: pll2.q,
pll2_r: pll2.r,
pll3_p: pll3.p,
pll3_q: pll3.q,
pll3_r: pll3.r,
// TODO
hse: None,
hsi: None,
audioclk: None,
hsi48_div_2: None,
lse: None,
lsi: None,
msik: None,
pll1_p: None,
pll1_q: None,
pll1_r: None,
pll2_p: None,
pll2_q: None,
pll2_r: None,
pll3_p: None,
pll3_q: None,
pll3_r: None,
iclk: None,
);
}
@ -501,3 +313,126 @@ fn msirange_to_hertz(range: Msirange) -> Hertz {
Msirange::RANGE_100KHZ => Hertz(100_000),
}
}
pub(super) struct PllInput {
pub hsi: Option<Hertz>,
pub hse: Option<Hertz>,
pub msi: Option<Hertz>,
}
#[allow(unused)]
#[derive(Default)]
pub(super) struct PllOutput {
pub p: Option<Hertz>,
pub q: Option<Hertz>,
pub r: Option<Hertz>,
}
#[derive(PartialEq, Eq, Clone, Copy)]
enum PllInstance {
Pll1 = 0,
Pll2 = 1,
Pll3 = 2,
}
fn pll_enable(instance: PllInstance, enabled: bool) {
RCC.cr().modify(|w| w.set_pllon(instance as _, enabled));
while RCC.cr().read().pllrdy(instance as _) != enabled {}
}
fn init_pll(instance: PllInstance, config: Option<Pll>, input: &PllInput, voltage_range: VoltageScale) -> PllOutput {
// Disable PLL
pll_enable(instance, false);
let Some(pll) = config else { return PllOutput::default() };
let src_freq = match pll.source {
PllSource::DISABLE => panic!("must not select PLL source as DISABLE"),
PllSource::HSE => unwrap!(input.hse),
PllSource::HSI => unwrap!(input.hsi),
PllSource::MSIS => unwrap!(input.msi),
};
// Calculate the reference clock, which is the source divided by m
let ref_freq = src_freq / pll.prediv;
// Check limits per RM0456 § 11.4.6
assert!(Hertz::mhz(4) <= ref_freq && ref_freq <= Hertz::mhz(16));
// Check PLL clocks per RM0456 § 11.4.10
let (vco_min, vco_max, out_max) = match voltage_range {
VoltageScale::RANGE1 => (Hertz::mhz(128), Hertz::mhz(544), Hertz::mhz(208)),
VoltageScale::RANGE2 => (Hertz::mhz(128), Hertz::mhz(544), Hertz::mhz(110)),
VoltageScale::RANGE3 => (Hertz::mhz(128), Hertz::mhz(330), Hertz::mhz(55)),
VoltageScale::RANGE4 => panic!("PLL is unavailable in voltage range 4"),
};
// Calculate the PLL VCO clock
let vco_freq = ref_freq * pll.mul;
assert!(vco_freq >= vco_min && vco_freq <= vco_max);
// Calculate output clocks.
let p = pll.divp.map(|div| vco_freq / div);
let q = pll.divq.map(|div| vco_freq / div);
let r = pll.divr.map(|div| vco_freq / div);
for freq in [p, q, r] {
if let Some(freq) = freq {
assert!(freq <= out_max);
}
}
let divr = match instance {
PllInstance::Pll1 => RCC.pll1divr(),
PllInstance::Pll2 => RCC.pll2divr(),
PllInstance::Pll3 => RCC.pll3divr(),
};
divr.write(|w| {
w.set_plln(pll.mul);
w.set_pllp(pll.divp.unwrap_or(PllDiv::DIV1));
w.set_pllq(pll.divq.unwrap_or(PllDiv::DIV1));
w.set_pllr(pll.divr.unwrap_or(PllDiv::DIV1));
});
let input_range = match ref_freq.0 {
..=8_000_000 => Pllrge::FREQ_4TO8MHZ,
_ => Pllrge::FREQ_8TO16MHZ,
};
macro_rules! write_fields {
($w:ident) => {
$w.set_pllpen(pll.divp.is_some());
$w.set_pllqen(pll.divq.is_some());
$w.set_pllren(pll.divr.is_some());
$w.set_pllm(pll.prediv);
$w.set_pllsrc(pll.source);
$w.set_pllrge(input_range);
};
}
match instance {
PllInstance::Pll1 => RCC.pll1cfgr().write(|w| {
// § 10.5.4: if we're targeting >= 55 MHz, we must configure PLL1MBOOST to a prescaler
// value that results in an output between 4 and 16 MHz for the PWR EPOD boost
if r.unwrap() >= Hertz::mhz(55) {
// source_clk can be up to 50 MHz, so there's just a few cases:
let mboost = match src_freq.0 {
..=16_000_000 => Pllmboost::DIV1, // Bypass, giving EPOD 4-16 MHz
..=32_000_000 => Pllmboost::DIV2, // Divide by 2, giving EPOD 8-16 MHz
_ => Pllmboost::DIV4, // Divide by 4, giving EPOD 8-12.5 MHz
};
w.set_pllmboost(mboost);
}
write_fields!(w);
}),
PllInstance::Pll2 => RCC.pll2cfgr().write(|w| {
write_fields!(w);
}),
PllInstance::Pll3 => RCC.pll3cfgr().write(|w| {
write_fields!(w);
}),
}
// Enable PLL
pll_enable(instance, true);
PllOutput { p, q, r }
}

27
examples/stm32u5/src/bin/usb_serial.rs
View File

@ -4,7 +4,6 @@
use defmt::{panic, *};
use defmt_rtt as _; // global logger
use embassy_executor::Spawner;
use embassy_stm32::rcc::*;
use embassy_stm32::usb_otg::{Driver, Instance};
use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
@ -22,22 +21,28 @@ async fn main(_spawner: Spawner) {
info!("Hello World!");
let mut config = Config::default();
config.rcc.mux = ClockSrc::PLL1_R(PllConfig {
source: PllSource::HSI,
m: Pllm::DIV2,
n: Plln::MUL10,
p: Plldiv::DIV1,
q: Plldiv::DIV1,
r: Plldiv::DIV1,
});
config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
{
use embassy_stm32::rcc::*;
config.rcc.hsi = true;
config.rcc.pll1 = Some(Pll {
source: PllSource::HSI, // 16 MHz
prediv: PllPreDiv::DIV1,
mul: PllMul::MUL10,
divp: None,
divq: None,
divr: Some(PllDiv::DIV1), // 160 MHz
});
config.rcc.mux = ClockSrc::PLL1_R;
config.rcc.voltage_range = VoltageScale::RANGE1;
config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
}
let p = embassy_stm32::init(config);
// Create the driver, from the HAL.
let mut ep_out_buffer = [0u8; 256];
let mut config = embassy_stm32::usb_otg::Config::default();
config.vbus_detection = true;
config.vbus_detection = false;
let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
// Create embassy-usb Config

13
tests/stm32/src/common.rs
View File

@ -577,7 +577,18 @@ pub fn config() -> Config {
#[cfg(any(feature = "stm32u585ai", feature = "stm32u5a5zj"))]
{
use embassy_stm32::rcc::*;
config.rcc.mux = ClockSrc::MSI(Msirange::RANGE_48MHZ);
config.rcc.hsi = true;
config.rcc.pll1 = Some(Pll {
source: PllSource::HSI, // 16 MHz
prediv: PllPreDiv::DIV1,
mul: PllMul::MUL10,
divp: None,
divq: None,
divr: Some(PllDiv::DIV1), // 160 MHz
});
config.rcc.mux = ClockSrc::PLL1_R;
config.rcc.voltage_range = VoltageScale::RANGE1;
config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
}
#[cfg(feature = "stm32wba52cg")]